In Windows Forms, you can know, at any time, the current position of the cursor thanks to the Cursors class.
The same thing doesn't seem to be available for the keyboard. Is it possible to know if, for example, the Shift key is pressed?
Is it absolutely necessary to track down every keyboard notification (KeyDown and KeyUp events)?
The code below is how to detect almost all currently pressed keys, not just the Shift key.
private KeyMessageFilter m_filter = new KeyMessageFilter();
private void Form1_Load(object sender, EventArgs e)
{
Application.AddMessageFilter(m_filter);
}
public class KeyMessageFilter : IMessageFilter
{
private const int WM_KEYDOWN = 0x0100;
private const int WM_KEYUP = 0x0101;
private bool m_keyPressed = false;
private Dictionary<Keys, bool> m_keyTable = new Dictionary<Keys, bool>();
public Dictionary<Keys, bool> KeyTable
{
get { return m_keyTable; }
private set { m_keyTable = value; }
}
public bool IsKeyPressed()
{
return m_keyPressed;
}
public bool IsKeyPressed(Keys k)
{
bool pressed = false;
if (KeyTable.TryGetValue(k, out pressed))
{
return pressed;
}
return false;
}
public bool PreFilterMessage(ref Message m)
{
if (m.Msg == WM_KEYDOWN)
{
KeyTable[(Keys)m.WParam] = true;
m_keyPressed = true;
}
if (m.Msg == WM_KEYUP)
{
KeyTable[(Keys)m.WParam] = false;
m_keyPressed = false;
}
return false;
}
}
You can also look at the following if you use WPF or reference System.Windows.Input
if (Keyboard.Modifiers == ModifierKeys.Shift)
The Keyboard namespace can also be used to check the pressed state of other keys with Keyboard.IsKeyDown(Key), or if you are subscribing to a KeyDownEvent or similar event, the event arguments carry a list of currently pressed keys.
Most of these answers are either far too complicated or don't seem to work for me (e.g. System.Windows.Input doesn't seem to exist). Then I found some sample code which works fine: http://www.switchonthecode.com/tutorials/winforms-accessing-mouse-and-keyboard-state
In case the page disappears in the future I am posting the relevant source code below:
using System;
using System.Windows.Forms;
using System.Runtime.InteropServices;
namespace MouseKeyboardStateTest
{
public abstract class Keyboard
{
[Flags]
private enum KeyStates
{
None = 0,
Down = 1,
Toggled = 2
}
[DllImport("user32.dll", CharSet = CharSet.Auto, ExactSpelling = true)]
private static extern short GetKeyState(int keyCode);
private static KeyStates GetKeyState(Keys key)
{
KeyStates state = KeyStates.None;
short retVal = GetKeyState((int)key);
//If the high-order bit is 1, the key is down
//otherwise, it is up.
if ((retVal & 0x8000) == 0x8000)
state |= KeyStates.Down;
//If the low-order bit is 1, the key is toggled.
if ((retVal & 1) == 1)
state |= KeyStates.Toggled;
return state;
}
public static bool IsKeyDown(Keys key)
{
return KeyStates.Down == (GetKeyState(key) & KeyStates.Down);
}
public static bool IsKeyToggled(Keys key)
{
return KeyStates.Toggled == (GetKeyState(key) & KeyStates.Toggled);
}
}
}
Since .NET Framework version 3.0, it is possible to use the Keyboard.IsKeyDown method from the new System.Windows.Input namespace. For instance:
if (((Keyboard.IsKeyDown(Key.LeftCtrl) || Keyboard.IsKeyDown(Key.RightCtrl)) && Keyboard.IsKeyDown(Key.F))
{
// CTRL + F is currently pressed
}
Even though it's part of WPF, that method works fine for WinForm applications (provided that you add references to PresentationCore.dll and WindowsBase.dll). Unfortunately, however, the 3.0 and 3.5 versions of the Keyboard.IsKeyDown method did not work for WinForm applications. Therefore, if you do want to use it in a WinForm application, you'll need to be targeting .NET Framework 4.0 or later in order for it to work.
You can P/Invoke down to the Win32 GetAsyncKeyState to test any key on the keyboard.
You can pass in values from the Keys enum (e.g. Keys.Shift) to this function, so it only requires a couple of lines of code to add it.
The best way I have found to manage keyboard input on a Windows Forms form is to process it after the keystroke and before the focused control receives the event. Microsoft maintains a built-in Form-level property named .KeyPreview to facilitate this precise thing:
public frmForm()
{
// ...
frmForm.KeyPreview = true;
// ...
}
Then the form's _KeyDown, _KeyPress, and / or _KeyUp events can be marshaled to access input events before the focused form control ever sees them, and you can apply handler logic to capture the event there or allow it to pass through to the focused form control.
Although not as structurally graceful as XAML's event-routing architecture, it makes management of form-level functions in Winforms far simpler. See the MSDN notes on KeyPreview for caveats.
if (Control.ModifierKeys == Keys.Shift)
//Shift is pressed
The cursor x/y position is a property, and a keypress (like a mouse click/mousemove) is an event. Best practice is usually to let the interface be event driven. About the only time you would need the above is if you're trying to do a shift + mouseclick thing.
In WinForms:
if( Form.ModifierKeys == Keys.Shift )
It sounds like a duplicate of Stack Overflow question Detect Shift key is pressed without using events in Windows Forms?.
If you need to listen to keys in any generic class what are pressed when a 'Form' Window, this is your code. It doesnt listen to global windows key events, so it cannot be used to see keys when the window is not active.
Form.cs
public partial class Form1 : Form
{
public Form1()
{
// Some other Code
// Register all Keys pressed
this.KeyPreview = true;
KeyHandler.Instance.Init();
this.KeyDown += Form1_KeyDown;
this.KeyUp += Form1_KeyUp;
// Some other Code in the constructor
}
private void Form1_KeyUp(object sender, KeyEventArgs e)
{
// Fire event when a key is released
KeyHandler.Instance.FireKeyUp(sender, e);
}
private void Form1_KeyDown(object sender, KeyEventArgs e)
{
// Fire event when a key is pressed
KeyHandler.Instance.FireKeyDown(sender, e);
}
}
KeyHandler.cs KeyHandler is a Singleton Class and can be accessed in any other Object through Handler.Instance... Easy right.
public class KeyHandler
{
#region Singleton
private static KeyHandler instance;
private KeyHandler()
{
currentlyPressedKeys = new List<Keys>();
}
public static KeyHandler Instance
{
get
{
if (instance is null)
{
instance = new KeyHandler();
}
return instance;
}
}
#endregion Singleton
private List<Keys> currentlyPressedKeys;
public List<Keys> GetCurrentlyPressedKeys { get { return currentlyPressedKeys; } }
public void FireKeyDown(object sender, KeyEventArgs e)
{
if (!currentlyPressedKeys.Contains(e.KeyCode))
{
currentlyPressedKeys.Add(e.KeyCode);
KeyEventKeyPressed(sender, e);
}
}
public void FireKeyUp(object sender, KeyEventArgs e)
{
currentlyPressedKeys.Remove(e.KeyCode);
KeyEventKeyReleased(sender, e);
}
public event EventHandler<KeyEventArgs> KeyPressed;
protected virtual void KeyEventKeyPressed(object sender, KeyEventArgs e)
{
EventHandler<KeyEventArgs> handler = KeyPressed;
handler?.Invoke(sender, e);
}
public event EventHandler<KeyEventArgs> KeyReleased;
protected virtual void KeyEventKeyReleased(object sender, KeyEventArgs e)
{
EventHandler<KeyEventArgs> handler = KeyReleased;
handler?.Invoke(sender, e);
}
public void Init()
{
// Nothing to initialize yet
}
}
// In any other Class/Object its now possible to receive KeyEvents that are fired when the 'Form' is active. So its possible to listen to key events in any Control object or anything else. Its possible to see if e.g. multiple keys are pressed like Shift+Ctrl+Q or something like that.
public class SomeClass
{
public SomeClass()
{
KeyHandler.instance.KeyPressed += Instance_KeyPressed
KeyHandler.Instance.KeyReleased += Instance_KeyReleased;
}
public void SomeMethod()
{
if (KeyHandler.Instance.GetCurrentlyPressedKeys.Contains(Keys.ShiftKey))
{
// Do Stuff when the method has a key (e.g. Shift/Control...) pressed
}
}
private void Instance_KeyPressed(object sender, KeyEventArgs e)
{
// Any Key was pressed, do Stuff then
}
private void Instance_KeyReleased(object sender, KeyEventArgs e)
{
// Do Stuff when a Key was Released
}
}
