Sending APDU command for reading a passive tag?

0
votes

I'm using libnfc and the apdu_examle.c with PN532 on my Beaglebone. I have a android example for emulating Miffare classic 1k card HCE(Host Card emulation) on my phone and everyting is working fine. If I tap the phone I can read the message that I'm sending from my phone.

Is it possible to send apdu commands to read data from a Miffare classic 1k card (passive tag)? not phone. The card is ISO/IEC 14443A standard. Must there be a specific format or data structure on the card?

Here are some more info about the card:

ISO/IEC 14443A (106 kbps) target: ATQA (SENS_RES): 00 04

  • UID size: single
  • bit frame anticollision supported UID (NFCID1): db 6c 10 2b
    SAK (SEL_RES): 08
  • Not compliant with ISO/IEC 14443-4
  • Not compliant with ISO/IEC 18092

Fingerprinting based on MIFARE type Identification Procedure:

  • MIFARE Classic 1K
  • MIFARE Plus (4 Byte UID or 4 Byte RID) 2K, Security level 1
  • SmartMX with MIFARE 1K emulation
1
nfcapdumifarelib-nfc

1 Answers

0
votes

MIFARE Classic does not operate with APDUs (ISO 7816 layer 4), but at layer 3 + proprietary extensions. As far as I know, it is not possible to communicate with it using HCE unless the phone has an NFC chipset from NXP.

But if your card is a SmartMX with emulated MIFARE, that means that you can send APDUs to the JavaCard OS. Have you tried sending a simple command, for example an empty SELECT 00A4040000?