How do I apply opacity to a CSS color variable?

Question

I am designing an app in electron, so I have access to CSS variables. I have defined a color variable in vars.css:

:root {
  --color: #f0f0f0;
}

I want to use this color in main.css, but with some opacity applied:

#element {
  background: (somehow use var(--color) at some opacity);
}

How would I go about doing this? I am not using any preprocessor, only CSS. I would prefer an all-CSS answer, but I will accept JavaScript/jQuery.

I cannot use opacity because I am using a background image that should not be transparent.

Answer 1

You can't take an existing color value and apply an alpha channel to it. Namely, you can't take an existing hex value such as #f0f0f0, give it an alpha component and use the resulting value with another property.

However, custom properties allow you to convert your hex value into an RGB triplet for use with rgba(), store that value in the custom property (including the commas!), substitute that value using var() into an rgba() function with your desired alpha value, and it'll just work:

:root {
  /* #f0f0f0 in decimal RGB */
  --color: 240, 240, 240;
}

body {
  color: #000;
  background-color: #000;
}

#element {
  background-color: rgba(var(--color), 0.8);
}

<p id="element">If you can see this, your browser supports custom properties.</p>

This seems almost too good to be true.¹ How does it work?

The magic lies in the fact that the values of custom properties are substituted as is when replacing var() references in a property value, before that property's value is computed. This means that as far as custom properties are concerned, the value of --color in your example isn't a color value at all until a var(--color) expression appears somewhere that expects a color value (and only in that context). From section 2.1 of the css-variables spec:

The allowed syntax for custom properties is extremely permissive. The <declaration-value> production matches any sequence of one or more tokens, so long as the sequence does not contain <bad-string-token>, <bad-url-token>, unmatched <)-token>, <]-token>, or <}-token>, or top-level <semicolon-token> tokens or <delim-token> tokens with a value of "!".

For example, the following is a valid custom property:

--foo: if(x > 5) this.width = 10;

While this value is obviously useless as a variable, as it would be invalid in any normal property, it might be read and acted on by JavaScript.

And section 3:

If a property contains one or more var() functions, and those functions are syntactically valid, the entire property’s grammar must be assumed to be valid at parse time. It is only syntax-checked at computed-value time, after var() functions have been substituted.

This means that the 240, 240, 240 value you see above gets substituted directly into the rgba() function before the declaration is computed. So this:

#element {
  background-color: rgba(var(--color), 0.8);
}

which doesn't appear to be valid CSS at first because rgba() expects no less than four comma-separated numeric values, becomes this:

#element {
  background-color: rgba(240, 240, 240, 0.8);
}

which, of course, is perfectly valid CSS.

Taking it one step further, you can store the alpha component in its own custom property:

:root {
  --color: 240, 240, 240;
  --alpha: 0.8;
}

and substitute it, with the same result:

#element {
  background-color: rgba(var(--color), var(--alpha));
}

This allows you to have different alpha values that you can swap around on-the-fly.

---

¹_{Well, it is, if you're running the code snippet in a browser that doesn't support custom properties.}

Answer 2

I know the OP isn't using a preprocessor, but I would have been helped if the following information was part of the answer here (I can't comment yet, otherwise I would have commented @BoltClock answer.

If you are using, e.g. scss, the answer above will fail, because scss attempts to compile the styles with a scss-specific rgba()/hsla() function, which requires 4 parameters. However, rgba()/hsla() are also native css functions, so you can use string interpolation to bypass the scss function.

Example (valid in sass 3.5.0+):

:root {
    --color_rgb: 250, 250, 250;
    --color_hsl: 250, 50%, 50%;
}

div {
    /* This is valid CSS, but will fail in a scss compilation */
    background-color: rgba(var(--color_rgb), 0.5);
    
    /* This is valid scss, and will generate the CSS above */
    background-color: #{'rgba(var(--color_rgb), 0.5)'};
}

<div></div>

Note that string interpolation will not work for non-CSS scss functions, such as lighten(), because the resulting code would not be functional CSS. It would still be valid scss though, so you would receive no error in compilation.

Answer 3

I was in a similar situation, but unfortunately the given solutions did not work for me, as the variables could be anything from rgb to hsl to hex or even color names.
I solved this issue now, by applying the background-color and the opacity to a pseudo :after or :before element:

.container {
    position: relative;
}

.container::before {
    content: "";
    width: 100%;
    height: 100%;
    position: absolute;
    left: 0;
    background-color: var(--color);
    opacity: 0.3;
}

The styles might need to be changed a little, depending on the element the background should be applied to.
Also it might not work for all situations, but hopefully it helps in some cases, where the other solutions can't be used.

Edit: I just noticed, that this solution obviously also impacts the text color, as it creates an element in front of the target element and applies a transparent background color to it.
This might be a problem in some cases.

Answer 4

This is indeed possible with CSS. It's just a bit dirty, and you'll have to use gradients. I've coded a small snippet as example, take note that for dark backgrounds, you should use the black opacity, as for light- the white ones.:

:root {
  --red: rgba(255, 0, 0, 1);
  --white-low-opacity: rgba(255, 255, 255, .3);
  --white-high-opacity: rgba(255, 255, 255, .7);
  --black-low-opacity: rgba(0, 0, 0, .3);
  --black-high-opacity: rgba(0, 0, 0, .7);
}

div {
	width: 100px;
	height: 100px;
	margin: 10px;
}
    
    
.element1 {
	background: 
        linear-gradient(var(--white-low-opacity), var(--white-low-opacity)) no-repeat,
	linear-gradient(var(--red), var(--red)) no-repeat;
}

.element2 {
	background: 
        linear-gradient(var(--white-high-opacity), var(--white-high-opacity)) no-repeat,
	linear-gradient(var(--red), var(--red)) no-repeat;
}
    
.element3 {
	background: 
        linear-gradient(var(--black-low-opacity), var(--black-low-opacity)) no-repeat,
	linear-gradient(var(--red), var(--red)) no-repeat;
}

.element4 {
	background: 
        linear-gradient(var(--black-high-opacity), var(--black-high-opacity)) no-repeat,
	linear-gradient(var(--red), var(--red)) no-repeat;
}

<div class="element1">hello world</div>
<div class="element2">hello world</div>
<div class="element3">hello world</div>
<div class="element4">hello world</div>

Answer 5

SCSS / SASS

Advantage: You can just use Hex color values, instead to use the 8 Bit for every channel (0-255).

This is how I did it with the initial idea of: https://codyhouse.co/blog/post/how-to-combine-sass-color-functions-and-css-variables

Edit: You could also modify the alpha function to just use #{$color-name}-rgb and omit the generated *-r, *-g, *-b CSS variables.

---

Result

body {
  --main-color: rgb(170, 68, 204);
  --main-color-rgb: 170,68,204;
  --main-color-r: 170;
  --main-color-g: 68;
  --main-color-b: 204;
}

.button-test {
  // Generated from the alpha function
  color: rgba(var(--main-color-r), var(--main-color-g), var(--main-color-b), 0.5);
  // OR (you wrote this yourself, see usage)
  color: rgba(var(--main-color-rgb), 0.5);
}

Usage:

body {
    @include defineColorRGB(--main-color, #aa44cc);
}

.button-test {
  // With alpha function:
  color: alpha(var(--main-color), 0.5);
  // OR just using the generated variable directly
  color: rgba(var(--main-color-rgb), 0.5);
}

Mixin and functions

@mixin defineColorRGB($color-name, $value) {
    $red: red($value);
    $green: green($value);
    $blue: blue($value);
    #{$color-name}: unquote("rgb(#{$red}, #{$green}, #{$blue})");
    #{$color-name}-rgb: $red,$green,$blue;
    #{$color-name}-r: $red;
    #{$color-name}-g: $green;
    #{$color-name}-b: $blue;
}

// replace substring with another string
// credits: https://css-tricks.com/snippets/sass/str-replace-function/
@function str-replace($string, $search, $replace: '') {
    $index: str-index($string, $search);
    @if $index {
        @return str-slice($string, 1, $index - 1) + $replace + str-replace(str-slice($string, $index + str-length($search)), $search, $replace);
    }
    @return $string;
}

@function alpha($color, $opacity) {
    $color: str-replace($color, 'var(');
    $color: str-replace($color, ')');
    $color-r: var(#{$color+'-r'});
    $color-g: var(#{$color+'-g'});
    $color-b: var(#{$color+'-b'});
    @return rgba($color-r, $color-g, $color-b, $opacity);
}

Hopefully this will save someone some time.

Answer 6

If you use dark and light mode, i use this sample. I prefer separate between colors and rgb colors variable assignment. So i use two each loop. I realise this solution is not dry code. If you want to dry code could you use one loop.

$colors-light: (
  white: #fff,
  black: #0c0d0e,
  orange: #f48024,
  green: #5eba7d,
  blue: #0077cc,
  red: #d1383d,
  red-100: #e2474c,
  red-200: red,
);

$colors-dark: (
  black: #fff,
  white: #2d2d2d,
  orange: #dd7118,
  green: #5eba7d,
  blue: #0077cc,
  red: #aa1c21,
  red-100: #c9292e,
  red-200: red,
);

@function hexToRGB($hex) {
  @return red($hex), green($hex), blue($hex);
}

@mixin generate_colors($colors) {
  // Colors
  @each $color, $value in $colors {
    @if str-slice(#{$value}, 1, 1) == "#" {
      --#{$color}: #{$value};
    } @else {
      --#{$color}: var(--#{$value});
    }
  }

  // RGB Colors
  @each $color, $value in $colors {
    @if str-slice(#{$value}, 1, 1) == "#" {
      --RGB_#{$color}: #{hexToRGB($value)};
    } @else {
      --RGB_#{$color}: var(--RGB_#{$value});
    }
  }
}

:root {
  @include generate_colors($colors-light);
}

[data-theme="dark"] {
  @include generate_colors($colors-dark);
}

dry code

@mixin generate_colors($colors) {
  // Colors, RGB Colors
  @each $color, $value in $colors {
    @if str-slice(#{$value}, 1, 1) == "#" {
      --#{$color}: #{$value};
      --RGB_#{$color}: #{hexToRGB($value)};
    } @else {
      --#{$color}: var(--#{$value});
      --RGB_#{$color}: var(--RGB_#{$value});
    }
  }
}

css Output

:root {
  --white: #fff;
  --RGB_white: 255, 255, 255;
  --black: #0c0d0e;
  --RGB_black: 12, 13, 14;
  --orange: #f48024;
  --RGB_orange: 244, 128, 36;
  --green: #5eba7d;
  --RGB_green: 94, 186, 125;
  --blue: #0077cc;
  --RGB_blue: 0, 119, 204;
  --red: #d1383d;
  --RGB_red: 209, 56, 61;
  --red-100: #e2474c;
  --RGB_red-100: 226, 71, 76;
  --red-200: var(--red);
  --RGB_red-200: var(--RGB_red);
}

[data-theme="dark"] {
  --black: #fff;
  --RGB_black: 255, 255, 255;
  --white: #2d2d2d;
  --RGB_white: 45, 45, 45;
  --orange: #dd7118;
  --RGB_orange: 221, 113, 24;
  --green: #5eba7d;
  --RGB_green: 94, 186, 125;
  --blue: #0077cc;
  --RGB_blue: 0, 119, 204;
  --red: #aa1c21;
  --RGB_red: 170, 28, 33;
  --red-100: #c9292e;
  --RGB_red-100: 201, 41, 46;
  --red-200: var(--red);
  --RGB_red-200: var(--RGB_red);
}

body {
  background-color: var(--white);
}

.colors {
  display: -webkit-box;
  display: -ms-flexbox;
  display: flex;
  -webkit-box-orient: horizontal;
  -webkit-box-direction: normal;
      -ms-flex-direction: row;
          flex-direction: row;
  -ms-flex-wrap: wrap;
      flex-wrap: wrap;
  -webkit-box-pack: start;
      -ms-flex-pack: start;
          justify-content: flex-start;
  -webkit-box-align: center;
      -ms-flex-align: center;
          align-items: center;
  margin: 50px 0 0 30px;
}

.box {
  width: 100px;
  height: 100px;
  margin-right: 5px;
}

.black {
  background-color: var(--black);
}

.white {
  background-color: var(--white);
}

.orange {
  background-color: var(--orange);
}

.green {
  background-color: var(--green);
}

.blue {
  background-color: var(--blue);
}

.red {
  background-color: var(--red);
}

.red-200 {
  background-color: var(--red-200);
}

.black-rgba {
  background-color: rgba(var(--RGB_black), 0.5);
}

.white-rgba {
  background-color: rgba(var(--RGB_white), 0.5);
}

.orange-rgba {
  background-color: rgba(var(--RGB_orange), 0.5);
}

.green-rgba {
  background-color: rgba(var(--RGB_green), 0.5);
}

.blue-rgba {
  background-color: rgba(var(--RGB_blue), 0.5);
}

.red-rgba {
  background-color: rgba(var(--RGB_red), 0.5);
}

.red-rgba-200 {
  background-color: rgba(var(--RGB_red-200), 0.5);
}

<!DOCTYPE html>
<html lang="en">
  <head>
    <meta charset="UTF-8" />
    <meta name="viewport" content="width=device-width, initial-scale=1.0" />
    <title>Document</title>
    <link rel="stylesheet" href="style.css" />
  </head>
  <body>
    <div>
      <input type="checkbox" id="dark-switch" name="theme" />
      <label for="dark-switch">Dark / Light</label>
    </div>

    <div class="color-box">
        <div class="colors">
          <div class="box red-200"></div>
          <div class="box black"></div>
          <div class="box white"></div>
          <div class="box orange"></div>
          <div class="box green"></div>
          <div class="box blue"></div>
          <div class="box red"></div>
        </div>
        <br>

        <h1>RGBA</h1>
        <div class="colors">
          <div class="box red-rgba-200"></div>
          <div class="box black-rgba"></div>
          <div class="box white-rgba"></div>
          <div class="box orange-rgba"></div>
          <div class="box green-rgba"></div>
          <div class="box blue-rgba"></div>
          <div class="box red-rgba"></div>
        </div>

    </div>

    <script>
      const dark_switch = document.getElementById("dark-switch");

      dark_switch.addEventListener("change", (e) => {
        e.target.checked
          ? document.documentElement.setAttribute("data-theme", "dark")
          : document.documentElement.setAttribute("data-theme", "light");
      });
    </script>
  </body>
</html>

Answer 7

you can use linear-gradient to hack the color:

background: linear-gradient(to bottom, var(--your-color) -1000%, var(--mixin-color), 1000%)

$(() => {
  const setOpacity = () => {
    $('#canvas').css('--opacity', $('#opacity-value').val())
  }
  const setColor = () => {
    $('#canvas').css('--color', $('#color-value').val());
  }
  $('#opacity-value').on('input', setOpacity);
  $('#color-value').on('input', setColor);
  setOpacity();
  setColor();
})

#canvas {
  width: 100px;
  height: 100px;
  border: 2px solid #000;
  --hack: 10000%;
  background: linear-gradient( to bottom, var(--color) calc((var(--opacity) - 1) * var(--hack)), transparent calc(var(--opacity) * var(--hack)));
}

#container {
  background-image: linear-gradient(45deg, #b0b0b0 25%, transparent 25%), linear-gradient(-45deg, #b0b0b0 25%, transparent 25%), linear-gradient(45deg, transparent 75%, #b0b0b0 75%), linear-gradient(-45deg, transparent 75%, #b0b0b0 75%);
  background-size: 20px 20px;
  background-position: 0 0, 0 10px, 10px -10px, -10px 0px;
  padding: 10px;
  display: inline-block;
}

<script src="https://cdnjs.cloudflare.com/ajax/libs/jquery/3.3.1/jquery.min.js"></script>

<div id="container">
  <div id="canvas"></div>
</div>
<hr/>
<input type="range" id="opacity-value" min="0" max="1" step="0.1" value="0.5" />
<input type="color" id="color-value" />

Answer 8

:root{
--color: 255, 0, 0;
}

#element{
    background-color: rgba(var(--color), opacity);
}

where you replace opacity with anything between 0 and 1

Answer 9

You can set specific variable/value for each color - the original and the one with opacity:

:root {
  --color: #F00;
  --color-opacity: rgba(255, 0, 0, 0.5);
}
#a1 {
  background: var(--color);
} 
#a2 {
  background: var(--color-opacity);
}

<div id="a1">asdf</div>
<div id="a2">asdf</div>

If you can't use this and you are ok with javascript solution, you can use this one:

$(function() {
  $('button').click(function() {
    bgcolor = $('#a2').css('backgroundColor');
    rgb_value = bgcolor.match(/\d+,\s?\d+,\s?\d+/)[0]
    $('#a2').css('backgroundColor', 'rgba(' + rgb_value + ', 0.5)');
  });
});

:root {
  --color: #F00;
}
#a1 {
  background: var(--color);
} 
#a2 {
  background: var(--color);
}

<script src="https://ajax.googleapis.com/ajax/libs/jquery/2.1.1/jquery.min.js"></script>
<div id="a1">asdf</div>
<div id="a2">asdf</div>
<button>Click to change opacity</button>

Answer 10

For using rgba() with general css variable, try this:

1. Declare your color inside :root, but don't use rgb() as other answers do. just write the value

:root{
  --color : 255,0,0;
  }

2. Use --color variable using var() as other answers

#some-element {
  color : rgba(var(--color),0.5);
}

Answer 11

If you love hex colors like me there is another solution. The hex value is 6 digits after that is the alpha value. 00 is 100% transparency 99 is about 75% then it uses the alphabet 'a1-af' then 'b1-bf' ending with 'ff' which is 100% opaque.

:root {
--color: #F00;
}

#element {
background: var(--color)f6;
}

Answer 12

In CSS you should be able to either use rgba values:

#element {
  background: rgba(240, 240, 240, 0.5);
}

or just set the opacity:

#element {
  background: #f0f0f0;
  opacity: 0.5;    
}