Is it possible to enable multiline editing like in Sublime Text?
For example, press Ctrl to place additional cursor carets and being able to write/delete on multiple places in the document at one time.
741
votes
30 Answers
1332
votes
On Windows, you hold Ctrl+Alt while pressing the up ↑ or down ↓ arrow keys to add cursors.
Mac: ⌥ Opt+⌘ Cmd+↑/↓
Linux: Shift+Alt+↑/↓
Note that third-party software may interfere with these shortcuts, preventing them from working as intended (particularly Intel's HD Graphics software on Windows; see comments for more details).
If you experience this issue, you can either disable the Intel/other software hotkeys, or modify the VS Code shortcuts (described below).
Press Esc to reset to a single cursor.
Or, as Isidor Nikolic points out, you can hold Alt and left click to place cursors arbitrarily.
You can view and edit keyboard shortcuts via:
File → Preferences → Keyboard Shortcuts
Documentation:
https://code.visualstudio.com/docs/customization/keybindings
Official VS Code Keyboard shortcut cheat sheets:
https://code.visualstudio.com/shortcuts/keyboard-shortcuts-windows.pdf
https://code.visualstudio.com/shortcuts/keyboard-shortcuts-macos.pdf
https://code.visualstudio.com/shortcuts/keyboard-shortcuts-linux.pdf
87
votes
71
votes
Box Selecting
Windows: shift + alt + Mouse Left Button
macOS: shift + option + Click
This is contrary to what is mentioned in an answer to Does Visual Studio Code have box select/multi-line edit?.
39
votes
I wanted to select multiple lines and hit "something" to have a cursor for each select lines (similar to Ctrl + Shift + L in Sublime Text). This action in Visual Studio Code is called "Add Cursors to Line Ends".
This was tested in Visual Studio Code 1.51.1 and works on both Windows and Mac.
Here is the way:
- Select the lines you want to have multiple cursors.
- Simply hit Alt + Shift-I.
You now have one cursor per selected line.
37
votes
25
votes
From the version 1.13 (May 2017) you can finally change the default modifier key for creating multiple cursors (add to settings):
"editor.multiCursorModifier": "ctrlCmd"
P.S.: The modifier "follow link" from this moment will be Alt.
17
votes
In the latest release of Visual Studio Code, you can now drag the cursor while holding Option (Alt on Windows) to select the same column on multiple rows.
To enable this, make sure you change your editor.multiCursorModifier to look like this:
"editor.multiCursorModifier": "ctrlCmd"
From the Visual Studio Code release notes 1.32.0:
In the following video, the selection begins as a regular selection and then Alt is pressed and held until the mouse button is released:
16
votes
I am using the vscodevim extension, so I'm not sure if this is a common problem. But, I was having the issue where Ctrl + Alt + UpArrow flipped my screen upside down.
Looking at the Visual Studio Code Basics (I don't know if they changed this in a recent update), it says to use:
Ctrl + Alt + Shift + (Up/down)
15
votes
12
votes
11
votes
Working solution for me was first selecting the required text to edit and then using CTRL + F2 to select all matching data in the page. You may also use CTRL+Shift+L as suggested by @lesterCovax
Please Note: The above solution uses the inherent ability of VSCode editor to select similar text across the entire page, and therefore, be careful.
For me the above solution of Ctrl + ALT + Arrowkeys did not work as it caused the screen to change its display orientation against selecting the lines in VSCode.
10
votes
As of April 2018 (version 1.23) you can now also use the middle mouse button to multiline select / box select.
8
votes
version 1.43 (February 2020)
You can now toggle column selection mode, which changes mouse gestures and arrow keys, via:
- Menu Bar > Selection > Column Selection Mode
- Ctrl+Shift+P (Show All Commands) > Toggle Column Selection Mode
- Bind your key for command
"editor.action.toggleColumnSelection"
Note: There is a "Column Selection" panel in the status bar after activation, which you can press to disable it again.
6
votes
5
votes
4
votes
4
votes
I think it depends on your Visual Studio Code version.
Mine is Linux version Visual Studio Code 1.7.2.
{ "key": "ctrl+shift+up", "command": "editor.action.insertCursorAbove",
"when": "editorTextFocus" },
{ "key": "shift+alt+up", "command": "editor.action.insertCursorAbove",
"when": "editorTextFocus" },
{ "key": "ctrl+shift+down", "command": "editor.action.insertCursorBelow",
"when": "editorTextFocus" },
{ "key": "shift+alt+down", "command": "editor.action.insertCursorBelow",
"when": "editorTextFocus" }
The point is the shortcuts are not same in all machines, so you should check your configuration. Go to menu:
Menu File → Preferences → Keyboard Shortcuts
Search for editor.action.insertCursorAbove and editor.action.insertCursorBelow and see your current configurations. You may change them if they conflict with operating system's shortcut keys.
3
votes
If you're using Linux, there's a possibility of a conflict with Alt + click, which is the default for "moving a window".
You can go to menu Settings → Window Behavior → Window Behavior → Actions tab
Just remove Alt + left (hold) and it will work.
This is the best way, because you don't need to hold two + keys to do such a simple task.
3
votes
2
votes
My settings: Windows 8.1 64 bits, Visual Studio Code version 1.33.1.
Problem: Conflict with keyboard shortcuts of Intel HD Graphics 4000
I had a problem when I was using the default shortcuts of the Visual Studio Code (Ctrl + Alt + UP, Ctrl + Alt + DOWN). In my case, these commands were turning my screen in 0º and 180º respectively. It's happening, because there is the Graphic Intel application installed on my computer. Then, I just disable the shortcuts of this application.
Here is an tutorial to help someone.
2
votes
I am using the Sublime Text keymap and the keybinding provided by the top answer did not seem to work :( Could be some conflicts between Visual Studio Code and sublime keymaps.
The keybinding recommended by @Han works for me (much appreciated!):
- Enter multiline cursor mode with Ctrl + Shift + Up/Down
- Exit with Esc
(Sidenote) Below is a small example of using Emmet together with the multiline cursor (enabled and disabled with these key bindings listed above):
2
votes
I am using the latest version of VS code i.e., 1.46.1 (May 2020) in Windows 10. Just press Alt+mouse left click on the lines you want to select. This will let you select multiple lines at once and let you edit them. Also Press Esc to exit from it.
This is really helpful if you're coming from sublime text.
1
votes
1
votes
0
votes
The solution from @maxime of using SHIFT + ALT + i worked for me, when I needed to quickly edit ~20k lines in a file. Most of the other keyboard shortcuts mentioned are only useful for a limited number of line. SHIFT selecting the area you want to column edit, then pressing SHIFT + ALT + i is the most efficient way to handle this.
What I accidentally discovered though, (and hasn't been mentioned here yet) is that there is a limit of 10k lines in "cursor edit mode" (there's an open Github feature request to increase it). This means that for extremely large files, it may be better to script your edits, rather than doing it manually.
For those like @specimen that had to use shortcuts like CTRL + SHIFT + L (default binding is Select all occurrences of current selection) to accomplish this, you should check that you don't have a keymap extension installed. You can check by searching for @recommended:keymaps in the extensions pane, going to File > Preferences > Keymaps (CTRL+K CTRL+M).
The default [Windows] keymap can be found in PDF form HERE, or you can go to File > Preferences > Keyboard Shortcuts to find/modify the current bindings. There is also more in-depth key bindings documentation HERE.
0
votes
editor.action.insertCursorAtEndOfEachLineSelected- enzoborgfrantz