I have a dictionary which looks like this: di = {1: "A", 2: "B"}
I would like to apply it to the "col1" column of a dataframe similar to:
col1 col2
0 w a
1 1 2
2 2 NaN
to get:
col1 col2
0 w a
1 A 2
2 B NaN
How can I best do this? For some reason googling terms relating to this only shows me links about how to make columns from dicts and vice-versa :-/
You can use .replace. For example:
>>> df = pd.DataFrame({'col2': {0: 'a', 1: 2, 2: np.nan}, 'col1': {0: 'w', 1: 1, 2: 2}})
>>> di = {1: "A", 2: "B"}
>>> df
col1 col2
0 w a
1 1 2
2 2 NaN
>>> df.replace({"col1": di})
col1 col2
0 w a
1 A 2
2 B NaN
or directly on the Series, i.e. df["col1"].replace(di, inplace=True).
map can be much faster than replaceIf your dictionary has more than a couple of keys, using map can be much faster than replace. There are two versions of this approach, depending on whether your dictionary exhaustively maps all possible values (and also whether you want non-matches to keep their values or be converted to NaNs):
In this case, the form is very simple:
df['col1'].map(di) # note: if the dictionary does not exhaustively map all
# entries then non-matched entries are changed to NaNs
Although map most commonly takes a function as its argument, it can alternatively take a dictionary or series: Documentation for Pandas.series.map
If you have a non-exhaustive mapping and wish to retain the existing variables for non-matches, you can add fillna:
df['col1'].map(di).fillna(df['col1'])
as in @jpp's answer here: Replace values in a pandas series via dictionary efficiently
Using the following data with pandas version 0.23.1:
di = {1: "A", 2: "B", 3: "C", 4: "D", 5: "E", 6: "F", 7: "G", 8: "H" }
df = pd.DataFrame({ 'col1': np.random.choice( range(1,9), 100000 ) })
and testing with %timeit, it appears that map is approximately 10x faster than replace.
Note that your speedup with map will vary with your data. The largest speedup appears to be with large dictionaries and exhaustive replaces. See @jpp answer (linked above) for more extensive benchmarks and discussion.
There is a bit of ambiguity in your question. There are at least three two interpretations:
di refer to index valuesdi refer to df['col1'] valuesdi refer to index locations (not the OP's question, but thrown in for fun.)Below is a solution for each case.
Case 1:
If the keys of di are meant to refer to index values, then you could use the update method:
df['col1'].update(pd.Series(di))
For example,
import pandas as pd
import numpy as np
df = pd.DataFrame({'col1':['w', 10, 20],
'col2': ['a', 30, np.nan]},
index=[1,2,0])
# col1 col2
# 1 w a
# 2 10 30
# 0 20 NaN
di = {0: "A", 2: "B"}
# The value at the 0-index is mapped to 'A', the value at the 2-index is mapped to 'B'
df['col1'].update(pd.Series(di))
print(df)
yields
col1 col2
1 w a
2 B 30
0 A NaN
I've modified the values from your original post so it is clearer what update is doing.
Note how the keys in di are associated with index values. The order of the index values -- that is, the index locations -- does not matter.
Case 2:
If the keys in di refer to df['col1'] values, then @DanAllan and @DSM show how to achieve this with replace:
import pandas as pd
import numpy as np
df = pd.DataFrame({'col1':['w', 10, 20],
'col2': ['a', 30, np.nan]},
index=[1,2,0])
print(df)
# col1 col2
# 1 w a
# 2 10 30
# 0 20 NaN
di = {10: "A", 20: "B"}
# The values 10 and 20 are replaced by 'A' and 'B'
df['col1'].replace(di, inplace=True)
print(df)
yields
col1 col2
1 w a
2 A 30
0 B NaN
Note how in this case the keys in di were changed to match values in df['col1'].
Case 3:
If the keys in di refer to index locations, then you could use
df['col1'].put(di.keys(), di.values())
since
df = pd.DataFrame({'col1':['w', 10, 20],
'col2': ['a', 30, np.nan]},
index=[1,2,0])
di = {0: "A", 2: "B"}
# The values at the 0 and 2 index locations are replaced by 'A' and 'B'
df['col1'].put(di.keys(), di.values())
print(df)
yields
col1 col2
1 A a
2 10 30
0 B NaN
Here, the first and third rows were altered, because the keys in di are 0 and 2, which with Python's 0-based indexing refer to the first and third locations.
DSM has the accepted answer, but the coding doesn't seem to work for everyone. Here is one that works with the current version of pandas (0.23.4 as of 8/2018):
import pandas as pd
df = pd.DataFrame({'col1': [1, 2, 2, 3, 1],
'col2': ['negative', 'positive', 'neutral', 'neutral', 'positive']})
conversion_dict = {'negative': -1, 'neutral': 0, 'positive': 1}
df['converted_column'] = df['col2'].replace(conversion_dict)
print(df.head())
You'll see it looks like:
col1 col2 converted_column
0 1 negative -1
1 2 positive 1
2 2 neutral 0
3 3 neutral 0
4 1 positive 1
The docs for pandas.DataFrame.replace are here.
Adding to this question if you ever have more than one columns to remap in a data dataframe:
def remap(data,dict_labels):
"""
This function take in a dictionnary of labels : dict_labels
and replace the values (previously labelencode) into the string.
ex: dict_labels = {{'col1':{1:'A',2:'B'}}
"""
for field,values in dict_labels.items():
print("I am remapping %s"%field)
data.replace({field:values},inplace=True)
print("DONE")
return data
Hope it can be useful to someone.
Cheers
Given map is faster than replace (@JohnE's solution) you need to be careful with Non-Exhaustive mappings where you intend to map specific values to NaN. The proper method in this case requires that you mask the Series when you .fillna, else you undo the mapping to NaN.
import pandas as pd
import numpy as np
d = {'m': 'Male', 'f': 'Female', 'missing': np.NaN}
df = pd.DataFrame({'gender': ['m', 'f', 'missing', 'Male', 'U']})
keep_nan = [k for k,v in d.items() if pd.isnull(v)]
s = df['gender']
df['mapped'] = s.map(d).fillna(s.mask(s.isin(keep_nan)))
gender mapped
0 m Male
1 f Female
2 missing NaN
3 Male Male
4 U U
As an extension to what have been proposed by Nico Coallier (apply to multiple columns) and U10-Forward(using apply style of methods), and summarising it into a one-liner I propose:
df.loc[:,['col1','col2']].transform(lambda x: x.map(lambda x: {1: "A", 2: "B"}.get(x,x))
The .transform() processes each column as a series. Contrary to .apply()which passes the columns aggregated in a DataFrame.
Consequently you can apply the Series method map().
Finally, and I discovered this behaviour thanks to U10, you can use the whole Series in the .get() expression. Unless I have misunderstood its behaviour and it processes sequentially the series instead of bitwisely.
The .get(x,x)accounts for the values you did not mention in your mapping dictionary which would be considered as Nan otherwise by the .map() method
A more native pandas approach is to apply a replace function as below:
def multiple_replace(dict, text):
# Create a regular expression from the dictionary keys
regex = re.compile("(%s)" % "|".join(map(re.escape, dict.keys())))
# For each match, look-up corresponding value in dictionary
return regex.sub(lambda mo: dict[mo.string[mo.start():mo.end()]], text)
Once you defined the function, you can apply it to your dataframe.
di = {1: "A", 2: "B"}
df['col1'] = df.apply(lambda row: multiple_replace(di, row['col1']), axis=1)
