Preventing console window from closing on Visual Studio C/C++ Console application

Question

This is a probably an embarasing question as no doubt the answer is blindingly obvious.

I've used Visual Studio for years, but this is the first time I've done any 'Console Application' development.

When I run my application the console window pops up, the program output appears and then the window closes as the application exits.

Is there a way to either keep it open until I have checked the output, or view the results after the window has closed?

Answer 1

Starting from Visual Studio 2017 (15.9.4) there is an option:

Tools->Options->Debugging->Automatically close the console

The corresponding fragment from the Visual Studio documentation:

Automatically close the console when debugging stops:

Tells Visual Studio to close the console at the end of a debugging session.

Answer 2

If you run without debugging (Ctrl+F5) then by default it prompts your to press return to close the window. If you want to use the debugger, you should put a breakpoint on the last line.

Answer 3

Right click on your project

Properties > Configuration Properties > Linker > System

Select Console (/SUBSYSTEM:CONSOLE) in SubSystem option or you can just type Console in the text field!

Now try it...it should work

Answer 4

Here is a way for C/C++:

#include <stdlib.h>

#ifdef _WIN32
    #define WINPAUSE system("pause")
#endif

Put this at the top of your program, and IF it is on a Windows system (#ifdef _WIN32), then it will create a macro called WINPAUSE. Whenever you want your program to pause, call WINPAUSE; and it will pause the program, using the DOS command. For other systems like Unix/Linux, the console should not quit on program exit anyway.

Answer 5

If you're using .NET, put Console.ReadLine() before the end of the program.

It will wait for <ENTER>.

Answer 6

Goto Debug Menu->Press StartWithoutDebugging

Answer 7

try to call getchar() right before main() returns.

Answer 8

(/SUBSYSTEM:CONSOLE) did not worked for my vs2013 (I already had it).

"run without debugging" is not an options, since I do not want to switch between debugging and seeing output.

I ended with

int main() {
  ...
#if _DEBUG
  LOG_INFO("end, press key to close");
  getchar();
#endif // _DEBUG
  return 0;
}

Solution used in qtcreator pre 2.6. Now while qt is growing, vs is going other way. As I remember, in vs2008 we did not need such tricks.

Answer 9

Here's a solution that (1) doesn't require any code changes or breakpoints, and (2) pauses after program termination so that you can see everything that was printed. It will pause after either F5 or Ctrl+F5. The major downside is that on VS2013 Express (as tested), it doesn't load symbols, so debugging is very restricted.

1. Create a batch file. I called mine runthenpause.bat, with the following contents:

   %1 %2 %3 %4 %5 %6 %7 %8 %9
   pause
   

   The first line will run whatever command you provide and up to eight arguments. The second line will... pause.

2. Open the project properties | Configuration properties | Debugging.

3. Change "Command Arguments" to $(TargetPath) (or whatever is in "Command").
4. Change "Command" to the full path to runthenpause.bat.
5. Hit OK.

Now, when you run, runthenpause.bat will launch your application, and after your application has terminated, will pause for you to see the console output.

I will post an update if I figure out how to get the symbols loaded. I tried /Z7 per this but without success.

Answer 10

just put as your last line of code:

system("pause");

Answer 11

add “| pause” in command arguments box under debugging section at project properties.

Answer 12

You could run your executable from a command prompt. This way you could see all the output. Or, you could do something like this:

int a = 0;
scanf("%d",&a);

return YOUR_MAIN_CODE;

and this way the window would not close until you enter data for the a variable.

Answer 13

Just press CNTRL + F5 to open it in an external command line window (Visual Studio does not have control over it).

If this doesn't work then add the following to the end of your code:

Console.WriteLine("Press any key to exit...");
Console.ReadKey();

This wait for you to press a key to close the terminal window once the code has reached the end.

If you want to do this in multiple places, put the above code in a method (e.g. private void Pause()) and call Pause() whenever a program reaches a possible end.

Answer 14

A somewhat better solution:

atexit([] { system("PAUSE"); });

at the beginning of your program.

Pros:

• can use std::exit()
• can have multiple returns from main
• you can run your program under the debugger
• IDE independent (+ OS independent if you use the cin.sync(); cin.ignore(); trick instead of system("pause");)

Cons:

• have to modify code
• won't pause on std::terminate()
• will still happen in your program outside of the IDE/debugger session; you can prevent this under Windows using:

---

extern "C" int __stdcall IsDebuggerPresent(void);
int main(int argc, char** argv) {
    if (IsDebuggerPresent())
        atexit([] {system("PAUSE"); });
    ...
}

Answer 15

Either use:

1. cin.get();

or

2. system("pause");

Make sure to make either of them at the end of main() function and before the return statement.

Answer 16

You can also use this option

#include <conio.h> 
/* run this program using the console pauser or add your own getch, system("pause") or input loop */
int main() {
   .
   .
   .
   getch(); 

   return 0;
}

Answer 17

In my case, i experienced this when i created an Empty C++ project on VS 2017 community edition. You will need to set the Subsystem to "Console (/SUBSYSTEM:CONSOLE)" under Configuration Properties.

1. Go to "View" then select "Property Manager"
2. Right click on the project/solution and select "Property". This opens a Test property page
3. Navigate to the linker then select "System"
4. Click on "SubSystem" and a drop down appears
5. Choose "Console (/SUBSYSTEM:CONSOLE)"
6. Apply and save
7. The next time you run your code with "CTRL +F5", you should see the output.

Answer 18

Use Console.ReadLine() at the end of the program. This will keep the window open until you press the Enter key. See https://docs.microsoft.com/en-us/dotnet/api/system.console.readline for details.

Answer 19

Visual Studio 2015, with imports. Because I hate when code examples don't give the needed imports.

#include <iostream>;

int main()
{
    getchar();
    return 0;
}

Answer 20

Go to Setting>Debug>Un-check close on end.

Answer 21

Currently there is no way to do this with apps running in WSL2. However there are two work-arounds:

1. The debug window retains the contents of the WSL shell window that closed.

2. The window remains open if your application returns a non-zero return code, so you could return non-zero in debug builds for example.

Answer 22

Sometimes a simple hack that doesnt alter your setup or code can be:

Set a breakpoint with F9, then execute Debug with F5.