Unable to read from Serial Port using C# Mono (RaspberryPi)

Question

I'm attempting to write a C# library which looks at all available USB serial ports on a Raspberry Pi so that I can enumerate, identify and communicate with a set of Arduinos connected to the Pi via a USB hub.

I am able to make this work on my windows machine (several Arduinos connected to my desktop computer) and have even been able to make it work on my Pi however, I am struggling to understand how to generalize the fix.

If I attempt to run the program by itself on the Pi, I am able to open the serial port and send data however, I cannot receive anything from the Arduinos: I get timeout exceptions. I understand that Mono's implementation of SerialPort is limited and I must use SerialPort.ReadByte() instead of Readline() and the data received events (my solution is based on code from HowToSystemIOPorts). My Serial port enumeration is using a method outlined in another stack exchange response here.

My timeout is currently set to 4 seconds, which is several orders of magnitude longer than I expect to receive the message.

After a lot of googling, I came across mention of using minicom to initialize the serial port here, which to my surprise allowed me to receive data from the Arduino. The biggest drawback is that I need to initialize the port using minicom and leave the process opening each time I boot the Pi. I also can't seem to figure out how to make this work with multiple Arduinos.

Here is what I have tried so far:

Updated the Pi firmware and software to their latest versions
Attempted to use both an Arduino MEGA 2560 R3 and Arduino UNO
Changed the owner of the tty* ports (ttyACM0 and ttyUSB0 in this case) to both my user and group
Successfully configured the port via minicom, left the process running and start the program and read/wrote data. A manual process which only seems to work for one Arduino at a time
Successfully run the program in Windows without fault
Verified the Arduinos are recognized by the Pi running "dmesg | grep tty"

Here is what I hope to solve:

Automatic setup/initialization of the Arduino serial ports. Whether through a shell script run before the main program or within Mono code so that the code below can run as intended.

Here is my connection code:

    public bool StartArduinoComms()
    {
        string[] ports = GetPortNames();
        foreach (string port in ports)
        {
            mLogger.LogMessage(ProsthesisCore.Utility.Logger.LoggerChannels.Arduino, string.Format("Found serial port {0}", port));
        }

        bool foundCorrectArduino = false;

        var idPacket = new ArduinoMessageBase();
        idPacket.ID = ArduinoMessageValues.kIdentifyValue;

        string jsonOutput = Newtonsoft.Json.JsonConvert.SerializeObject(idPacket);

        foreach (string port in ports)
        {
            SerialPort serialPort = new SerialPort(port, kArduinoCommsBaudRate);
            serialPort.Parity = Parity.None;
            serialPort.DataBits = 8;
            serialPort.StopBits = StopBits.One;

            //Only check unopened ports
            if (!serialPort.IsOpen)
            {
                serialPort.Open();

                //Disable telemtry just incase
                var toggle = new { ID = ArduinoMessageValues.kTelemetryEnableValue, EN = false };
                string disableTelem = Newtonsoft.Json.JsonConvert.SerializeObject(toggle);
                serialPort.Write(disableTelem);

                //Discard any built up data
                serialPort.DiscardInBuffer();
                serialPort.Write(jsonOutput);
                serialPort.ReadTimeout = kIDTimeoutMilliseconds;

                string response = string.Empty;
                for (int i = 0; i < kNumRetries; ++i)
                {
                    try
                    {
                        //This is guaranteed to timeout if not configured through minicom
                        response = ReadLine(serialPort);
                        break;
                    }
                    //Catch case where the serial port is unavailable. MOve to next port
                    catch (TimeoutException)
                    {
                        continue;
                    }
                }

                if (!string.IsNullOrEmpty(response))
                {
                    //Perform response validation
                }
                else
                {
                    //Got no response
                }

                if (!foundCorrectArduino)
                {
                    serialPort.Close();
                }
            }
        }

        return foundCorrectArduino;
    }
    /// <summary>
    /// From https://stackguides.com/questions/434494/serial-port-rs232-in-mono-for-multiple-platforms
    /// </summary>
    /// <returns></returns>
    private static string[] GetPortNames()
    {
        int p = (int)Environment.OSVersion.Platform;
        List<string> serial_ports = new List<string>();

        // Are we on Unix?
        if (p == 4 || p == 128 || p == 6)
        {
            string[] ttys = System.IO.Directory.GetFiles("/dev/", "tty*");
            foreach (string dev in ttys)
            {
                //Arduino MEGAs show up as ttyACM due to their different USB<->RS232 chips
                if (dev.StartsWith("/dev/ttyS") || dev.StartsWith("/dev/ttyUSB") || dev.StartsWith("/dev/ttyACM"))
                {
                    serial_ports.Add(dev);
                }
            }
        }
        else
        {
            serial_ports.AddRange(SerialPort.GetPortNames());
        }

        return serial_ports.ToArray();
    }

Tim Hoffman Tim Hoffman · Accepted Answer · 2013-05-06T00:13:35

Have a look at stty command. It will let you set/read teminal settings

http://linux.about.com/od/lna_guide/a/gdelna38t01.htm will give a rundown on it's use. It would be easier to call out to than minicom, and the settings stay on the device.

Unable to read from Serial Port using C# Mono (RaspberryPi)

Here is what I have tried so far:

Here is what I hope to solve:

Here is my connection code:

2 Answers