1162
votes

Let's say, you have a Bash alias like:

alias rxvt='urxvt'

which works fine.

However:

alias rxvt='urxvt -fg '#111111' -bg '#111111''

won't work, and neither will:

alias rxvt='urxvt -fg \'#111111\' -bg \'#111111\''

So how do you end up matching up opening and closing quotes inside a string once you have escaped quotes?

alias rxvt='urxvt -fg'\''#111111'\'' -bg '\''#111111'\''

seems ungainly although it would represent the same string if you're allowed to concatenate them like that.

24
Do you realise that you don't need to use single quotes for alias? Double quotes is much easier.teknopaul
Nested double quotes are escapable, "\"", so those should be used in preference to @liori's answer whenever possible.alan
Double quotes behave quite differently from single quotes in *nix (including Bash, and related tools like Perl), so substituting double quotes whenever there's a problem with single quotes is NOT a good solution. Double quotes specify $... variables are to be substituted before execution, while single quotes specify $... are to be treated literally.Chuck Kollars
If you're thinking, I used double quotes but it's still not working, source your script again.Samy Bencherif

24 Answers

1640
votes

If you really want to use single quotes in the outermost layer, remember that you can glue both kinds of quotation. Example:

 alias rxvt='urxvt -fg '"'"'#111111'"'"' -bg '"'"'#111111'"'"
 #                     ^^^^^       ^^^^^     ^^^^^       ^^^^
 #                     12345       12345     12345       1234

Explanation of how '"'"' is interpreted as just ':

  1. ' End first quotation which uses single quotes.
  2. " Start second quotation, using double-quotes.
  3. ' Quoted character.
  4. " End second quotation, using double-quotes.
  5. ' Start third quotation, using single quotes.

If you do not place any whitespaces between (1) and (2), or between (4) and (5), the shell will interpret that string as a one long word.

297
votes

I always just replace each embedded single quote with the sequence: '\'' (that is: quote backslash quote quote) which closes the string, appends an escaped single quote and reopens the string.


I often whip up a "quotify" function in my Perl scripts to do this for me. The steps would be:

s/'/'\\''/g    # Handle each embedded quote
$_ = qq['$_']; # Surround result with single quotes.

This pretty much takes care of all cases.

Life gets more fun when you introduce eval into your shell-scripts. You essentially have to re-quotify everything again!

For example, create a Perl script called quotify containing the above statements:

#!/usr/bin/perl -pl
s/'/'\\''/g;
$_ = qq['$_'];

then use it to generate a correctly-quoted string:

$ quotify
urxvt -fg '#111111' -bg '#111111'

result:

'urxvt -fg '\''#111111'\'' -bg '\''#111111'\'''

which can then be copy/pasted into the alias command:

alias rxvt='urxvt -fg '\''#111111'\'' -bg '\''#111111'\'''

(If you need to insert the command into an eval, run the quotify again:

 $ quotify
 alias rxvt='urxvt -fg '\''#111111'\'' -bg '\''#111111'\'''

result:

'alias rxvt='\''urxvt -fg '\''\'\'''\''#111111'\''\'\'''\'' -bg '\''\'\'''\''#111111'\''\'\'''\'''\'''

which can be copy/pasted into an eval:

eval 'alias rxvt='\''urxvt -fg '\''\'\'''\''#111111'\''\'\'''\'' -bg '\''\'\'''\''#111111'\''\'\'''\'''\'''
240
votes

Since Bash 2.04 syntax $'string' allows a limit set of escapes.

Since Bash 4.4, $'string' also allows the full set of C-style escapes, making the behavior differ slightly in $'string' in previous versions. (Previously the $('string') form could be used.)

Simple example in Bash 2.04 and newer:

  $> echo $'aa\'bb'
  aa'bb

  $> alias myvar=$'aa\'bb'
  $> alias myvar
  alias myvar='aa'\''bb'

In your case:

$> alias rxvt=$'urxvt -fg \'#111111\' -bg \'#111111\''
$> alias rxvt
alias rxvt='urxvt -fg '\''#111111'\'' -bg '\''#111111'\'''

Common escaping sequences works as expected:

\'     single quote
\"     double quote
\\     backslash
\n     new line
\t     horizontal tab
\r     carriage return

Below is copy+pasted related documentation from man bash (version 4.4):

Words of the form $'string' are treated specially. The word expands to string, with backslash-escaped characters replaced as specified by the ANSI C standard. Backslash escape sequences, if present, are decoded as follows:

    \a     alert (bell)
    \b     backspace
    \e
    \E     an escape character
    \f     form feed
    \n     new line
    \r     carriage return
    \t     horizontal tab
    \v     vertical tab
    \\     backslash
    \'     single quote
    \"     double quote
    \?     question mark
    \nnn   the eight-bit character whose value is the octal 
           value nnn (one to three digits)
    \xHH   the eight-bit character whose value is the hexadecimal
           value HH (one or two hex digits)
    \uHHHH the Unicode (ISO/IEC 10646) character whose value is 
           the hexadecimal value HHHH (one to four hex digits)
    \UHHHHHHHH the Unicode (ISO/IEC 10646) character whose value 
               is the hexadecimal value HHHHHHHH (one to eight 
               hex digits)
    \cx    a control-x character

The expanded result is single-quoted, as if the dollar sign had not been present.


See Quotes and escaping: ANSI C like strings on bash-hackers.org wiki for more details. Also note that "Bash Changes" file (overview here) mentions a lot for changes and bug fixes related to the $'string' quoting mechanism.

According to unix.stackexchange.com How to use a special character as a normal one? it should work (with some variations) in bash, zsh, mksh, ksh93 and FreeBSD and busybox sh.

52
votes

I don't see the entry on his blog (link pls?) but according to the gnu reference manual:

Enclosing characters in single quotes (‘'’) preserves the literal value of each character within the quotes. A single quote may not occur between single quotes, even when preceded by a backslash.

so bash won't understand:

alias x='y \'z '

however, you can do this if you surround with double quotes:

alias x="echo \'y "
> x
> 'y
38
votes

I can confirm that using '\'' for a single quote inside a single-quoted string does work in Bash, and it can be explained in the same way as the "gluing" argument from earlier in the thread. Suppose we have a quoted string: 'A '\''B'\'' C' (all quotes here are single quotes). If it is passed to echo, it prints the following: A 'B' C. In each '\'' the first quote closes the current single-quoted string, the following \' glues a single quote to the previous string (\' is a way to specify a single quote without starting a quoted string), and the last quote opens another single-quoted string.

21
votes

Both versions are working, either with concatenation by using the escaped single quote character (\'), or with concatenation by enclosing the single quote character within double quotes ("'").

The author of the question did not notice that there was an extra single quote (') at the end of his last escaping attempt:

alias rxvt='urxvt -fg'\''#111111'\'' -bg '\''#111111'\''
           │         │┊┊|       │┊┊│     │┊┊│       │┊┊│
           └─STRING──┘┊┊└─STRIN─┘┊┊└─STR─┘┊┊└─STRIN─┘┊┊│
                      ┊┊         ┊┊       ┊┊         ┊┊│
                      ┊┊         ┊┊       ┊┊         ┊┊│
                      └┴─────────┴┴───┰───┴┴─────────┴┘│
                          All escaped single quotes    │
                                                       │
                                                       ?

As you can see in the previous nice piece of ASCII/Unicode art, the last escaped single quote (\') is followed by an unnecessary single quote ('). Using a syntax-highlighter like the one present in Notepad++ can prove very helpful.

The same is true for another example like the following one:

alias rc='sed '"'"':a;N;$!ba;s/\n/, /g'"'"
alias rc='sed '\'':a;N;$!ba;s/\n/, /g'\'

These two beautiful instances of aliases show in a very intricate and obfuscated way how a file can be lined down. That is, from a file with a lot of lines you get only one line with commas and spaces between the contents of the previous lines. In order to make sense of the previous comment, the following is an example:

$ cat Little_Commas.TXT
201737194
201802699
201835214

$ rc Little_Commas.TXT
201737194, 201802699, 201835214
16
votes

Simple example of escaping quotes in shell:

$ echo 'abc'\''abc'
abc'abc
$ echo "abc"\""abc"
abc"abc

It's done by finishing already opened one ('), placing escaped one (\'), then opening another one ('). This syntax works for all commands. It's very similar approach to the 1st answer.

16
votes

I'm not specifically addressing the quoting issue because, well, sometimes, it's just reasonable to consider an alternative approach.

rxvt() { urxvt -fg "#${1:-000000}" -bg "#${2:-FFFFFF}"; }

which you can then call as:

rxvt 123456 654321

the idea being that you can now alias this without concern for quotes:

alias rxvt='rxvt 123456 654321'

or, if you need to include the # in all calls for some reason:

rxvt() { urxvt -fg "${1:-#000000}" -bg "${2:-#FFFFFF}"; }

which you can then call as:

rxvt '#123456' '#654321'

then, of course, an alias is:

alias rxvt="rxvt '#123456' '#654321'"

(oops, i guess i kind of did address the quoting :)

12
votes

Since one cannot put single quotes within single quoted strings, the simplest and most readable option is to use a HEREDOC string

command=$(cat <<'COMMAND'
urxvt -fg '#111111' -bg '#111111'
COMMAND
)

alias rxvt=$command

In the code above, the HEREDOC is sent to the cat command and the output of that is assigned to a variable via the command substitution notation $(..)

Putting a single quote around the HEREDOC is needed since it is within a $()

11
votes

I just use shell codes.. e.g. \x27 or \\x22 as applicable. No hassle, ever really.

8
votes

IMHO the real answer is that you can't escape single-quotes within single-quoted strings.

Its impossible.

If we presume we are using bash.

From bash manual...

Enclosing characters in single quotes preserves the literal value of each
character within the quotes.  A single quote may not occur
between single quotes, even when preceded by a backslash.

You need to use one of the other string escape mechanisms " or \

There is nothing magic about alias that demands it use single quotes.

Both the following work in bash.

alias rxvt="urxvt -fg '#111111' -bg '#111111'"
alias rxvt=urxvt\ -fg\ \'#111111\'\ -bg\ \'#111111\'

The latter is using \ to escape the space character.

There is also nothing magic about #111111 that requires single quotes.

The following options achieves the same result the other two options, in that the rxvt alias works as expected.

alias rxvt='urxvt -fg "#111111" -bg "#111111"'
alias rxvt="urxvt -fg \"#111111\" -bg \"#111111\""

You can also escape the troublesome # directly

alias rxvt="urxvt -fg \#111111 -bg \#111111"
7
votes

Most of these answers hit on the specific case you're asking about. There is a general approach that a friend and I have developed that allows for arbitrary quoting in case you need to quote bash commands through multiple layers of shell expansion, e.g., through ssh, su -c, bash -c, etc. There is one core primitive you need, here in native bash:

quote_args() {
    local sq="'"
    local dq='"'
    local space=""
    local arg
    for arg; do
        echo -n "$space'${arg//$sq/$sq$dq$sq$dq$sq}'"
        space=" "
    done
}

This does exactly what it says: it shell-quotes each argument individually (after bash expansion, of course):

$ quote_args foo bar
'foo' 'bar'
$ quote_args arg1 'arg2 arg2a' arg3
'arg1' 'arg2 arg2a' 'arg3'
$ quote_args dq'"'
'dq"'
$ quote_args dq'"' sq"'"
'dq"' 'sq'"'"''
$ quote_args "*"
'*'
$ quote_args /b*
'/bin' '/boot'

It does the obvious thing for one layer of expansion:

$ bash -c "$(quote_args echo a'"'b"'"c arg2)"
a"b'c arg2

(Note that the double quotes around $(quote_args ...) are necessary to make the result into a single argument to bash -c.) And it can be used more generally to quote properly through multiple layers of expansion:

$ bash -c "$(quote_args bash -c "$(quote_args echo a'"'b"'"c arg2)")"
a"b'c arg2

The above example:

  1. shell-quotes each argument to the inner quote_args individually and then combines the resulting output into a single argument with the inner double quotes.
  2. shell-quotes bash, -c, and the already once-quoted result from step 1, and then combines the result into a single argument with the outer double quotes.
  3. sends that mess as the argument to the outer bash -c.

That's the idea in a nutshell. You can do some pretty complicated stuff with this, but you have to be careful about order of evaluation and about which substrings are quoted. For instance, the following do the wrong things (for some definition of "wrong"):

$ (cd /tmp; bash -c "$(quote_args cd /; pwd 1>&2)")
/tmp
$ (cd /tmp; bash -c "$(quote_args cd /; [ -e *sbin ] && echo success 1>&2 || echo failure 1>&2)")
failure

In the first example, bash immediately expands quote_args cd /; pwd 1>&2 into two separate commands, quote_args cd / and pwd 1>&2, so the CWD is still /tmp when the pwd command is executed. The second example illustrates a similar problem for globbing. Indeed, the same basic problem occurs with all bash expansions. The problem here is that a command substitution isn't a function call: it's literally evaluating one bash script and using its output as part of another bash script.

If you try to simply escape the shell operators, you'll fail because the resulting string passed to bash -c is just a sequence of individually-quoted strings that aren't then interpreted as operators, which is easy to see if you echo the string that would have been passed to bash:

$ (cd /tmp; echo "$(quote_args cd /\; pwd 1\>\&2)")
'cd' '/;' 'pwd' '1>&2'
$ (cd /tmp; echo "$(quote_args cd /\; \[ -e \*sbin \] \&\& echo success 1\>\&2 \|\| echo failure 1\>\&2)")
'cd' '/;' '[' '-e' '*sbin' ']' '&&' 'echo' 'success' '1>&2' '||' 'echo' 'failure' '1>&2'

The problem here is that you're over-quoting. What you need is for the operators to be unquoted as input to the enclosing bash -c, which means they need to be outside the $(quote_args ...) command substitution.

Consequently, what you need to do in the most general sense is to shell-quote each word of the command not intended to be expanded at the time of command substitution separately, and not apply any extra quoting to the shell operators:

$ (cd /tmp; echo "$(quote_args cd /); $(quote_args pwd) 1>&2")
'cd' '/'; 'pwd' 1>&2
$ (cd /tmp; bash -c "$(quote_args cd /); $(quote_args pwd) 1>&2")
/
$ (cd /tmp; echo "$(quote_args cd /); [ -e *$(quote_args sbin) ] && $(quote_args echo success) 1>&2 || $(quote_args echo failure) 1>&2")
'cd' '/'; [ -e *'sbin' ] && 'echo' 'success' 1>&2 || 'echo' 'failure' 1>&2
$ (cd /tmp; bash -c "$(quote_args cd /); [ -e *$(quote_args sbin) ] && $(quote_args echo success) 1>&2 || $(quote_args echo failure) 1>&2")
success

Once you've done this, the entire string is fair game for further quoting to arbitrary levels of evaluation:

$ bash -c "$(quote_args cd /tmp); $(quote_args bash -c "$(quote_args cd /); $(quote_args pwd) 1>&2")"
/
$ bash -c "$(quote_args bash -c "$(quote_args cd /tmp); $(quote_args bash -c "$(quote_args cd /); $(quote_args pwd) 1>&2")")"
/
$ bash -c "$(quote_args bash -c "$(quote_args bash -c "$(quote_args cd /tmp); $(quote_args bash -c "$(quote_args cd /); $(quote_args pwd) 1>&2")")")"
/
$ bash -c "$(quote_args cd /tmp); $(quote_args bash -c "$(quote_args cd /); [ -e *$(quote_args sbin) ] && $(quote_args echo success) 1>&2 || $(quote_args echo failure) 1>&2")"
success
$ bash -c "$(quote_args bash -c "$(quote_args cd /tmp); $(quote_args bash -c "$(quote_args cd /); [ -e *sbin ] && $(quote_args echo success) 1>&2 || $(quote_args echo failure) 1>&2")")"
success
$ bash -c "$(quote_args bash -c "$(quote_args bash -c "$(quote_args cd /tmp); $(quote_args bash -c "$(quote_args cd /); [ -e *$(quote_args sbin) ] && $(quote_args echo success) 1>&2 || $(quote_args echo failure) 1>&2")")")"
success

etc.

These examples may seem overwrought given that words like success, sbin, and pwd don't need to be shell-quoted, but the key point to remember when writing a script taking arbitrary input is that you want to quote everything you're not absolutely sure doesn't need quoting, because you never know when a user will throw in a Robert'; rm -rf /.

To better understand what is going on under the covers, you can play around with two small helper functions:

debug_args() {
    for (( I=1; $I <= $#; I++ )); do
        echo -n "$I:<${!I}> " 1>&2
    done
    echo 1>&2
}

debug_args_and_run() {
    debug_args "$@"
    "$@"
}

that will enumerate each argument to a command before executing it:

$ debug_args_and_run echo a'"'b"'"c arg2
1:<echo> 2:<a"b'c> 3:<arg2> 
a"b'c arg2

$ bash -c "$(quote_args debug_args_and_run echo a'"'b"'"c arg2)"
1:<echo> 2:<a"b'c> 3:<arg2> 
a"b'c arg2

$ bash -c "$(quote_args debug_args_and_run bash -c "$(quote_args debug_args_and_run echo a'"'b"'"c arg2)")"
1:<bash> 2:<-c> 3:<'debug_args_and_run' 'echo' 'a"b'"'"'c' 'arg2'> 
1:<echo> 2:<a"b'c> 3:<arg2> 
a"b'c arg2

$ bash -c "$(quote_args debug_args_and_run bash -c "$(quote_args debug_args_and_run bash -c "$(quote_args debug_args_and_run echo a'"'b"'"c arg2)")")"
1:<bash> 2:<-c> 3:<'debug_args_and_run' 'bash' '-c' ''"'"'debug_args_and_run'"'"' '"'"'echo'"'"' '"'"'a"b'"'"'"'"'"'"'"'"'c'"'"' '"'"'arg2'"'"''> 
1:<bash> 2:<-c> 3:<'debug_args_and_run' 'echo' 'a"b'"'"'c' 'arg2'> 
1:<echo> 2:<a"b'c> 3:<arg2> 
a"b'c arg2

$ bash -c "$(quote_args debug_args_and_run bash -c "$(quote_args debug_args_and_run bash -c "$(quote_args debug_args_and_run bash -c "$(quote_args debug_args_and_run echo a'"'b"'"c arg2)")")")"
1:<bash> 2:<-c> 3:<'debug_args_and_run' 'bash' '-c' ''"'"'debug_args_and_run'"'"' '"'"'bash'"'"' '"'"'-c'"'"' '"'"''"'"'"'"'"'"'"'"'debug_args_and_run'"'"'"'"'"'"'"'"' '"'"'"'"'"'"'"'"'echo'"'"'"'"'"'"'"'"' '"'"'"'"'"'"'"'"'a"b'"'"'"'"'"'"'"'"'"'"'"'"'"'"'"'"'"'"'"'"'"'"'"'"'"'"'c'"'"'"'"'"'"'"'"' '"'"'"'"'"'"'"'"'arg2'"'"'"'"'"'"'"'"''"'"''> 
1:<bash> 2:<-c> 3:<'debug_args_and_run' 'bash' '-c' ''"'"'debug_args_and_run'"'"' '"'"'echo'"'"' '"'"'a"b'"'"'"'"'"'"'"'"'c'"'"' '"'"'arg2'"'"''> 
1:<bash> 2:<-c> 3:<'debug_args_and_run' 'echo' 'a"b'"'"'c' 'arg2'> 
1:<echo> 2:<a"b'c> 3:<arg2> 
a"b'c arg2
4
votes

In the given example, simply used double quotes instead of single quotes as outer escape mechanism:

alias rxvt="urxvt -fg '#111111' -bg '#111111'"

This approach is suited for many cases where you just want to pass a fixed string to a command: Just check how the shell will interpret the double-quoted string through an echo, and escape characters with backslash if necessary.

In the example, you'd see that double quotes are sufficient to protect the string:

$ echo "urxvt -fg '#111111' -bg '#111111'"
urxvt -fg '#111111' -bg '#111111'
4
votes

Obviously, it would be easier simply to surround with double quotes, but where's the challenge in that? Here is the answer using only single quotes. I'm using a variable instead of alias so that's it's easier to print for proof, but it's the same as using alias.

$ rxvt='urxvt -fg '\''#111111'\'' -bg '\''#111111'\'
$ echo $rxvt
urxvt -fg '#111111' -bg '#111111'

Explanation

The key is that you can close the single quote and re-open it as many times as you want. For example foo='a''b' is the same as foo='ab'. So you can close the single quote, throw in a literal single quote \', then reopen the next single quote.

Breakdown diagram

This diagram makes it clear by using brackets to show where the single quotes are opened and closed. Quotes are not "nested" like parentheses can be. You can also pay attention to the color highlighting, which is correctly applied. The quoted strings are maroon, whereas the \' is black.

'urxvt -fg '\''#111111'\'' -bg '\''#111111'\'    # original
[^^^^^^^^^^] ^[^^^^^^^] ^[^^^^^] ^[^^^^^^^] ^    # show open/close quotes
 urxvt -fg   ' #111111  '  -bg   ' #111111  '    # literal characters remaining

(This is essentially the same answer as Adrian's, but I feel this explains it better. Also his answer has 2 superfluous single quotes at the end.)

3
votes

Here is an elaboration on The One True Answer referenced above:

Sometimes I will be downloading using rsync over ssh and have to escape a filename with a ' in it TWICE! (OMG!) Once for bash and once for ssh. The same principle of alternating quotation delimiters is at work here.

For example, let's say we want to get: Louis Theroux's LA Stories ...

  1. First you enclose Louis Theroux in single quotes for bash and double quotes for ssh: '"Louis Theroux"'
  2. Then you use single quotes to escape a double quote '"'
  3. The use double quotes to escape the apostrophe "'"
  4. Then repeat #2, using single quotes to escape a double quote '"'
  5. Then enclose LA Stories in single quotes for bash and double quotes for ssh: '"LA Stories"'

And behold! You wind up with this:

rsync -ave ssh '"Louis Theroux"''"'"'"'"''"s LA Stories"'

which is an awful lot of work for one little ' -- but there you go

3
votes
shell_escape () {
    printf '%s' "'${1//\'/\'\\\'\'}'"
}

Implementation explanation:

  • double quotes so we can easily output wrapping single quotes and use the ${...} syntax

  • bash's search and replace looks like: ${varname//search/replacement}

  • we're replacing ' with '\''

  • '\'' encodes a single ' like so:

    1. ' ends the single quoting

    2. \' encodes a ' (the backslash is needed because we're not inside quotes)

    3. ' starts up single quoting again

    4. bash automatically concatenates strings with no white space between

  • there's a \ before every \ and ' because that's the escaping rules for ${...//.../...} .

string="That's "'#@$*&^`(@#'
echo "original: $string"
echo "encoded:  $(shell_escape "$string")"
echo "expanded: $(bash -c "echo $(shell_escape "$string")")"

P.S. Always encode to single quoted strings because they are way simpler than double quoted strings.

2
votes

Another way to fix the problem of too many layers of nested quotation:

You are trying to cram too much into too tiny a space, so use a bash function.

The problem is you are trying to have too many levels of nesting, and the basic alias technology is not powerful enough to accommodate. Use a bash function like this to make it so the single, double quotes back ticks and passed in parameters are all handled normally as we would expect:

lets_do_some_stuff() {
    tmp=$1                       #keep a passed in parameter.
    run_your_program $@          #use all your passed parameters.
    echo -e '\n-------------'    #use your single quotes.
    echo `date`                  #use your back ticks.
    echo -e "\n-------------"    #use your double quotes.
}
alias foobarbaz=lets_do_some_stuff

Then you can use your $1 and $2 variables and single, double quotes and back ticks without worrying about the alias function wrecking their integrity.

This program prints:

el@defiant ~/code $ foobarbaz alien Dyson ring detected @grid 10385
alien Dyson ring detected @grid 10385
-------------
Mon Oct 26 20:30:14 EDT 2015
-------------
2
votes

If you're generating the shell string within Python 2 or Python 3, the following may help to quote the arguments:

#!/usr/bin/env python

from __future__ import print_function

try:  # py3
    from shlex import quote as shlex_quote
except ImportError:  # py2
    from pipes import quote as shlex_quote

s = """foo ain't "bad" so there!"""

print(s)
print(" ".join([shlex_quote(t) for t in s.split()]))

This will output:

foo ain't "bad" so there!
foo 'ain'"'"'t' '"bad"' so 'there!'
2
votes

If you have GNU Parallel installed you can use its internal quoting:

$ parallel --shellquote
L's 12" record
<Ctrl-D>
'L'"'"'s 12" record'
$ echo 'L'"'"'s 12" record'
L's 12" record

From version 20190222 you can even --shellquote multiple times:

$ parallel --shellquote --shellquote --shellquote
L's 12" record
<Ctrl-D>
'"'"'"'"'"'"'L'"'"'"'"'"'"'"'"'"'"'"'"'"'"'"'"'"'"'"'"'"'"'"'"'"'"'s 12" record'"'"'"'"'"'"'
$ eval eval echo '"'"'"'"'"'"'L'"'"'"'"'"'"'"'"'"'"'"'"'"'"'"'"'"'"'"'"'"'"'"'"'"'"'s 12" record'"'"'"'"'"'"'
L's 12" record

It will quote the string in all supported shells (not only bash).

2
votes

Here are my two cents -- in the case if one wants to be sh-portable, not just bash-specific ( the solution is not too efficient, though, as it starts an external program -- sed ):

  • put this in quote.sh ( or just quote ) somewhere on your PATH :
# this works with standard input (stdin)
quote() {
  echo -n "'" ;
  sed 's/\(['"'"']['"'"']*\)/'"'"'"\1"'"'"'/g' ;
  echo -n "'"
}

case "$1" in
 -) quote ;;
 *) echo "usage: cat ... | quote - # single-quotes input for Bourne shell" 2>&1 ;;
esac

An example:

$ echo -n "G'day, mate!" | ./quote.sh -
'G'"'"'day, mate!'

And, of course, that converts back:

$ echo 'G'"'"'day, mate!'
G'day, mate!

Explanation: basically we have to enclose the input with quotes ', and then also replace any single quote within with this micro-monster: '"'"' ( end the opening quote with a pairing ', escape the found single quote by wrapping it with double quotes -- "'", and then finally issue a new opening single quote ', or in pseudo-notation : ' + "'" + ' == '"'"' )

One standard way to do that would be to use sed with the following substitution command:

s/\(['][']*\)/'"\1"'/g 

One small problem, though, is that in order to use that in shell one needs to escape all these single quote characters in the sed expression itself -- what leads to something like

sed 's/\(['"'"']['"'"']*\)/'"'"'"\1"'"'"'/g' 

( and one good way to build this result is to feed the original expression s/\(['][']*\)/'"\1"'/g to Kyle Rose' or George V. Reilly's scripts ).

Finally, it kind of makes sense to expect the input to come from stdin -- since passing it through command-line arguments could be already too much trouble.

( Oh, and may be we want to add a small help message so that the script does not hang when someone just runs it as ./quote.sh --help wondering what it does. )

2
votes

in addition to @JasonWoof perfect answer i want to show how i solved related problem

in my case encoding single quotes with '\'' will not always be sufficient, for example if a string must quoted with single quotes, but the total count of quotes results in odd amount

#!/bin/bash

# no closing quote
string='alecxs\'solution'

# this works for string
string="alecxs'solution"
string=alecxs\'solution
string='alecxs'\''solution'

let's assume string is a file name and we need to save quoted file names in a list (like stat -c%N ./* > list)

echo "'$string'" > "$string"
cat "$string"

but processing this list will fail (depending on how many quotes the string does contain in total)

while read file
  do
    ls -l "$file"
    eval ls -l "$file"
done < "$string"

workaround: encode quotes with string manipulation

string="${string//$'\047'/\'\$\'\\\\047\'\'}"

# result
echo "$string"

now it works because quotes are always balanced

echo "'$string'" > list
while read file
  do
    ls -l "$file"
    eval ls -l "$file"
done < list

Hope this helps when facing similar problem

2
votes

How to escape single quotes (') and double quotes (") with hex and octal chars

If using something like echo, I've had some really complicated and really weird and hard-to-escape (think: very nested) cases where the only thing I could get to work was using octal or hex codes!

Here are some examples:

1. Single quote example, where ' is escaped with hex \x27 or octal \047 (its corresponding ASCII code):

# 1. hex
$ echo -e "Let\x27s get coding!"
Let's get coding!

# 2. octal
$ echo -e "Let\047s get coding!"
Let's get coding!

2. Double quote example, where " is escaped with hex \x22 or octal \042 (its corresponding ASCII code).

Note: bash is nuts! Sometimes even the ! char has special meaning, and must either be removed from within the double quotes and then escaped "like this"\! or put entirely within single quotes 'like this!', rather than within double quotes.

# 1. hex; escape `!` by removing it from within the double quotes 
# and escaping it with `\!`
$ echo -e "She said, \x22Let\x27s get coding"\!"\x22"
She said, "Let's get coding!"

# OR put it all within single quotes:
$ echo -e 'She said, \x22Let\x27s get coding!\x22'
She said, "Let's get coding!"


# 2. octal; escape `!` by removing it from within the double quotes 
$ echo -e "She said, \042Let\047s get coding"\!"\042"
She said, "Let's get coding!"

# OR put it all within single quotes:
$ echo -e 'She said, \042Let\047s get coding!\042'
She said, "Let's get coding!"


# 3. mixed hex and octal, just for fun
# escape `!` by removing it from within the double quotes when it is followed by
# another escape sequence
$ echo -e "She said, \x22Let\047s get coding! It\x27s waaay past time to begin"\!"\042"
She said, "Let's get coding! It's waaay past time to begin!"

# OR put it all within single quotes:
$ echo -e 'She said, \x22Let\047s get coding! It\x27s waaay past time to begin!\042'
She said, "Let's get coding! It's waaay past time to begin!"

Note that if you don't properly escape !, when needed, as I've shown two ways to do above, you'll get some weird errors, like this:

$ echo -e "She said, \x22Let\047s get coding! It\x27s waaay past time to begin!\042"
bash: !\042: event not found

OR:

$ echo -e "She said, \x22Let\x27s get coding!\x22"
bash: !\x22: event not found

References:

  1. https://en.wikipedia.org/wiki/ASCII#Printable_characters
  2. https://serverfault.com/questions/208265/what-is-bash-event-not-found/208266#208266
  3. See also my other answer here: How do I write non-ASCII characters using echo?.
1
votes

This function:

quote () 
{ 
    local quoted=${1//\'/\'\\\'\'};
    printf "'%s'" "$quoted"
}

allows quoting of ' inside '. Use as this:

$ quote "urxvt -fg '#111111' -bg '#111111'"
'urxvt -fg '\''#111111'\'' -bg '\''#111111'\'''

If the line to quote gets more complex, like double quotes mixed with single quotes, it may become quite tricky to get the string to quote inside a variable. When such cases show up, write the exact line that you need to quote inside an script (similar to this).

#!/bin/bash

quote ()
{
    local quoted=${1//\'/\'\\\'\'};
    printf "'%s'" "$quoted"
}

while read line; do
    quote "$line"
done <<-\_lines_to_quote_
urxvt -fg '#111111' -bg '#111111'
Louis Theroux's LA Stories
'single quote phrase' "double quote phrase"
_lines_to_quote_

Will output:

'urxvt -fg '\''#111111'\'' -bg '\''#111111'\'''
'Louis Theroux'\''s LA Stories'
''\''single quote phrase'\'' "double quote phrase"'

All correctly quoted strings inside single quotes.

0
votes

Here is another solution. This function will take a single argument and appropriately quote it using the single-quote character, just as the voted answer above explains:

single_quote() {
  local quoted="'"
  local i=0
  while [ $i -lt ${#1} ]; do
    local ch="${1:i:1}"
    if [[ "$ch" != "'" ]]; then
      quoted="$quoted$ch"
    else
      local single_quotes="'"
      local j=1
      while [ $j -lt ${#1} ] && [[ "${1:i+j:1}" == "'" ]]; do
        single_quotes="$single_quotes'"
        ((j++))
      done
      quoted="$quoted'\"$single_quotes\"'"
      ((i+=j-1))
    fi
    ((i++))
  done
  echo "$quoted'"
}

So, you can use it this way:

single_quote "1 2 '3'"
'1 2 '"'"'3'"'"''

x="this text is quoted: 'hello'"
eval "echo $(single_quote "$x")"
this text is quoted: 'hello'