I need a different random number for each row in my table. The following seemingly obvious code uses the same random value for each row.
SELECT table_name, RAND() magic_number
FROM information_schema.tables
I'd like to get an INT or a FLOAT out of this. The rest of the story is I'm going to use this random number to create a random date offset from a known date, e.g. 1-14 days offset from a start date.
This is for Microsoft SQL Server 2000.
Take a look at SQL Server - Set based random numbers which has a very detailed explanation.
To summarize, the following code generates a random number between 0 and 13 inclusive with a uniform distribution:
ABS(CHECKSUM(NewId())) % 14
To change your range, just change the number at the end of the expression. Be extra careful if you need a range that includes both positive and negative numbers. If you do it wrong, it's possible to double-count the number 0.
A small warning for the math nuts in the room: there is a very slight bias in this code. CHECKSUM() results in numbers that are uniform across the entire range of the sql Int datatype, or at least as near so as my (the editor) testing can show. However, there will be some bias when CHECKSUM() produces a number at the very top end of that range. Any time you get a number between the maximum possible integer and the last exact multiple of the size of your desired range (14 in this case) before that maximum integer, those results are favored over the remaining portion of your range that cannot be produced from that last multiple of 14.
As an example, imagine the entire range of the Int type is only 19. 19 is the largest possible integer you can hold. When CHECKSUM() results in 14-19, these correspond to results 0-5. Those numbers would be heavily favored over 6-13, because CHECKSUM() is twice as likely to generate them. It's easier to demonstrate this visually. Below is the entire possible set of results for our imaginary integer range:
Checksum Integer: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 Range Result: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 0 1 2 3 4 5
You can see here that there are more chances to produce some numbers than others: bias. Thankfully, the actual range of the Int type is much larger... so much so that in most cases the bias is nearly undetectable. However, it is something to be aware of if you ever find yourself doing this for serious security code.
When called multiple times in a single batch, rand() returns the same number.
I'd suggest using convert(varbinary,newid()) as the seed argument:
SELECT table_name, 1.0 + floor(14 * RAND(convert(varbinary, newid()))) magic_number
FROM information_schema.tables
newid() is guaranteed to return a different value each time it's called, even within the same batch, so using it as a seed will prompt rand() to give a different value each time.
Edited to get a random whole number from 1 to 14.
RAND(CHECKSUM(NEWID()))
The above will generate a (pseudo-) random number between 0 and 1, exclusive. If used in a select, because the seed value changes for each row, it will generate a new random number for each row (it is not guaranteed to generate a unique number per row however).
Example when combined with an upper limit of 10 (produces numbers 1 - 10):
CAST(RAND(CHECKSUM(NEWID())) * 10 as INT) + 1
Transact-SQL Documentation:
Answering the old question, but this answer has not been provided previously, and hopefully this will be useful for someone finding this results through a search engine.
With SQL Server 2008, a new function has been introduced, CRYPT_GEN_RANDOM(8), which uses CryptoAPI to produce a cryptographically strong random number, returned as VARBINARY(8000). Here's the documentation page: https://docs.microsoft.com/en-us/sql/t-sql/functions/crypt-gen-random-transact-sql
So to get a random number, you can simply call the function and cast it to the necessary type:
select CAST(CRYPT_GEN_RANDOM(8) AS bigint)
or to get a float between -1 and +1, you could do something like this:
select CAST(CRYPT_GEN_RANDOM(8) AS bigint) % 1000000000 / 1000000000.0
The Rand() function will generate the same random number, if used in a table SELECT query. Same applies if you use a seed to the Rand function. An alternative way to do it, is using this:
SELECT ABS(CAST(CAST(NEWID() AS VARBINARY) AS INT)) AS [RandomNumber]
Got the information from here, which explains the problem very well.
If you need to preserve your seed so that it generates the "same" random data every time, you can do the following:
1. Create a view that returns select rand()
if object_id('cr_sample_randView') is not null
begin
drop view cr_sample_randView
end
go
create view cr_sample_randView
as
select rand() as random_number
go
2. Create a UDF that selects the value from the view.
if object_id('cr_sample_fnPerRowRand') is not null
begin
drop function cr_sample_fnPerRowRand
end
go
create function cr_sample_fnPerRowRand()
returns float
as
begin
declare @returnValue float
select @returnValue = random_number from cr_sample_randView
return @returnValue
end
go
3. Before selecting your data, seed the rand() function, and then use the UDF in your select statement.
select rand(200); -- see the rand() function
with cte(id) as
(select row_number() over(order by object_id) from sys.all_objects)
select
id,
dbo.cr_sample_fnPerRowRand()
from cte
where id <= 1000 -- limit the results to 1000 random numbers
The problem I sometimes have with the selected "Answer" is that the distribution isn't always even. If you need a very even distribution of random 1 - 14 among lots of rows, you can do something like this (my database has 511 tables, so this works. If you have less rows than you do random number span, this does not work well):
SELECT table_name, ntile(14) over(order by newId()) randomNumber
FROM information_schema.tables
This kind of does the opposite of normal random solutions in the sense that it keeps the numbers sequenced and randomizes the other column.
Remember, I have 511 tables in my database (which is pertinent only b/c we're selecting from the information_schema). If I take the previous query and put it into a temp table #X, and then run this query on the resulting data:
select randomNumber, count(*) ct from #X
group by randomNumber
I get this result, showing me that my random number is VERY evenly distributed among the many rows:
DROP VIEW IF EXISTS vwGetNewNumber;
GO
Create View vwGetNewNumber
as
Select CAST(RAND(CHECKSUM(NEWID())) * 62 as INT) + 1 as NextID,
'abcdefghijklmnopqrstuvwxyz0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ'as alpha_num;
---------------CTDE_GENERATE_PUBLIC_KEY -----------------
DROP FUNCTION IF EXISTS CTDE_GENERATE_PUBLIC_KEY;
GO
create function CTDE_GENERATE_PUBLIC_KEY()
RETURNS NVARCHAR(32)
AS
BEGIN
DECLARE @private_key NVARCHAR(32);
set @private_key = dbo.CTDE_GENERATE_32_BIT_KEY();
return @private_key;
END;
go
---------------CTDE_GENERATE_32_BIT_KEY -----------------
DROP FUNCTION IF EXISTS CTDE_GENERATE_32_BIT_KEY;
GO
CREATE function CTDE_GENERATE_32_BIT_KEY()
RETURNS NVARCHAR(32)
AS
BEGIN
DECLARE @public_key NVARCHAR(32);
DECLARE @alpha_num NVARCHAR(62);
DECLARE @start_index INT = 0;
DECLARE @i INT = 0;
select top 1 @alpha_num = alpha_num from vwGetNewNumber;
WHILE @i < 32
BEGIN
select top 1 @start_index = NextID from vwGetNewNumber;
set @public_key = concat (substring(@alpha_num,@start_index,1),@public_key);
set @i = @i + 1;
END;
return @public_key;
END;
select dbo.CTDE_GENERATE_PUBLIC_KEY() public_key;
If you need a specific number of random number you can use recursive CTE:
;WITH A AS (
SELECT 1 X, RAND() R
UNION ALL
SELECT X + 1, RAND(R*100000) --Change the seed
FROM A
WHERE X < 1000 --How many random numbers you need
)
SELECT
X
, RAND_BETWEEN_1_AND_14 = FLOOR(R * 14 + 1)
FROM A
OPTION (MAXRECURSION 0) --If you need more than 100 numbers
