10
votes

From the documentation for from_pretrained, I understand I don't have to download the pretrained vectors every time, I can save them and load from disk with this syntax:

  - a path to a `directory` containing vocabulary files required by the tokenizer, for instance saved using the :func:`~transformers.PreTrainedTokenizer.save_pretrained` method, e.g.: ``./my_model_directory/``.
  - (not applicable to all derived classes, deprecated) a path or url to a single saved vocabulary file if and only if the tokenizer only requires a single vocabulary file (e.g. Bert, XLNet), e.g.: ``./my_model_directory/vocab.txt``.

So, I went to the model hub:

I found the model I wanted:

I downloaded it from the link they provided to this repository:

Pretrained model on English language using a masked language modeling (MLM) objective. It was introduced in this paper and first released in this repository. This model is case-sensitive: it makes a difference between english and English.

Stored it in:

  /my/local/models/cased_L-12_H-768_A-12/

Which contains:

 ./
 ../
 bert_config.json
 bert_model.ckpt.data-00000-of-00001
 bert_model.ckpt.index
 bert_model.ckpt.meta
 vocab.txt

So, now I have the following:

  PATH = '/my/local/models/cased_L-12_H-768_A-12/'
  tokenizer = BertTokenizer.from_pretrained(PATH, local_files_only=True)

And I get this error:

>           raise EnvironmentError(msg)
E           OSError: Can't load config for '/my/local/models/cased_L-12_H-768_A-12/'. Make sure that:
E           
E           - '/my/local/models/cased_L-12_H-768_A-12/' is a correct model identifier listed on 'https://huggingface.co/models'
E           
E           - or '/my/local/models/cased_L-12_H-768_A-12/' is the correct path to a directory containing a config.json file

Similarly for when I link to the config.json directly:

  PATH = '/my/local/models/cased_L-12_H-768_A-12/bert_config.json'
  tokenizer = BertTokenizer.from_pretrained(PATH, local_files_only=True)

        if state_dict is None and not from_tf:
            try:
                state_dict = torch.load(resolved_archive_file, map_location="cpu")
            except Exception:
                raise OSError(
>                   "Unable to load weights from pytorch checkpoint file. "
                    "If you tried to load a PyTorch model from a TF 2.0 checkpoint, please set from_tf=True. "
                )
E               OSError: Unable to load weights from pytorch checkpoint file. If you tried to load a PyTorch model from a TF 2.0 checkpoint, please set from_tf=True.

What should I do differently to get huggingface to use my local pretrained model?

Update to address the comments

YOURPATH = '/somewhere/on/disk/'

name = 'transfo-xl-wt103'
tokenizer = TransfoXLTokenizerFast(name)
model = TransfoXLModel.from_pretrained(name)
tokenizer.save_pretrained(YOURPATH)
model.save_pretrained(YOURPATH)

>>> Please note you will not be able to load the save vocabulary in Rust-based TransfoXLTokenizerFast as they don't share the same structure.
('/somewhere/on/disk/vocab.bin', '/somewhere/on/disk/special_tokens_map.json', '/somewhere/on/disk/added_tokens.json')

So all is saved, but then....

YOURPATH = '/somewhere/on/disk/'
TransfoXLTokenizerFast.from_pretrained('transfo-xl-wt103', cache_dir=YOURPATH, local_files_only=True)

    "Cannot find the requested files in the cached path and outgoing traffic has been"
ValueError: Cannot find the requested files in the cached path and outgoing traffic has been disabled. To enable model look-ups and downloads online, set 'local_files_only' to False.
3
Not sure where you got these files from. When I check the link, I can download the following files: config.json, flax_model.msgpack, modelcard.json, pytorch_model.bin, tf_model.h5, vocab.txt. Also, it is better to save the files via tokenizer.save_pretrained('YOURPATH') and model.save_pretrained('YOURPATH') instead of downloading it directly.cronoik
Thank you. I have updated the question to reflect that I tried this and it did not seem to work.Mittenchops
Please use TransfoXLTokenizerFast.from_pretrained(YOURPATH).cronoik
@Mittenchops did you ever solve this? I'm having similar difficulty loading a model from disk.Evan Zamir

3 Answers

4
votes

Where is the file located relative to your model folder? I believe it has to be a relative PATH rather than an absolute one. So if your file where you are writing the code is located in 'my/local/', then your code should be like so:

PATH = 'models/cased_L-12_H-768_A-12/'
tokenizer = BertTokenizer.from_pretrained(PATH, local_files_only=True)

You just need to specify the folder where all the files are, and not the files directly. I think this is definitely a problem with the PATH. Try changing the style of "slashes": "/" vs "\", these are different in different operating systems. Also try using ".", like so ./models/cased_L-12_H-768_A-12/ etc.

1
votes

I had this same need and just got this working with Tensorflow on my Linux box so figured I'd share.

My requirements.txt file for my code environment:

tensorflow==2.2.0
Keras==2.4.3
scikit-learn==0.23.1
scipy==1.4.1
numpy==1.18.1
opencv-python==4.5.1.48
seaborn==0.11.1
tensorflow-hub==0.12.0
nltk==3.6.2
tqdm==4.60.0
transformers==4.6.0
ipywidgets==7.6.3

I'm using Python 3.6.

I went to this site here which shows the directory tree for the specific huggingface model I wanted. I happened to want the uncased model, but these steps should be similar for your cased version. Also note that my link is to a very specific commit of this model, just for the sake of reproducibility - there will very likely be a more up-to-date version by the time someone reads this.

I manually downloaded (or had to copy/paste into notepad++ because the download button took me to a raw version of the txt / json in some cases... odd...) the following files:

  • config.json
  • tf_model.h5
  • tokenizer_config.json
  • tokenizer.json
  • vocab.txt

NOTE: Once again, all I'm using is Tensorflow, so I didn't download the Pytorch weights. If you're using Pytorch, you'll likely want to download those weights instead of the tf_model.h5 file.

I then put those files in this directory on my Linux box:

/opt/word_embeddings/bert-base-uncased/

Probably a good idea to make sure there's at least read permissions on all of these files as well with a quick ls -la (my permissions on each file are -rw-r--r--). I also have execute permissions on the parent directory (the one listed above) so people can cd to this dir.

From there, I'm able to load the model like so:

tokenizer:

# python
from transformers import BertTokenizer
# tokenizer = BertTokenizer.from_pretrained("bert-base-cased")
tokenizer = BertTokenizer.from_pretrained("/opt/word_embeddings/bert-base-uncased/")

layer/model weights:

# python
from transformers import TFAutoModel
# bert = TFAutoModel.from_pretrained("bert-base-uncased")
bert = TFAutoModel.from_pretrained("/opt/word_embeddings/bert-base-uncased/")
0
votes

you can use simpletransformers library. checkout the link for more detailed explanation.

    model = ClassificationModel(
    "bert", "dir/your_path"
)

Here I used Classification Model as an example. You can use it for many other tasks as well like question answering etc.