How do I write a Rails 3.1 engine controller test in rspec?

Question

I have written a Rails 3.1 engine with the namespace Posts. Hence, my controllers are found in app/controllers/posts/, my models in app/models/posts, etc. I can test the models just fine. The spec for one model looks like...

module Posts
  describe Post do
    describe 'Associations' do
      it ...
      end

... and everything works fine.

However, the specs for the controllers do not work. The Rails engine is mounted at /posts, yet the controller is Posts::PostController. Thus, the tests look for the controller route to be posts/posts.

  describe "GET index" do
    it "assigns all posts as @posts" do
      Posts::Post.stub(:all) { [mock_post] }
       get :index
       assigns(:posts).should eq([mock_post])
    end
  end

which yields...

  1) Posts::PostsController GET index assigns all posts as @posts
     Failure/Error: get :index
     ActionController::RoutingError:
     No route matches {:controller=>"posts/posts"}
     # ./spec/controllers/posts/posts_controller_spec.rb:16

I've tried all sorts of tricks in the test app's routes file... :namespace, etc, to no avail.

How do I make this work? It seems like it won't, since the engine puts the controller at /posts, yet the namespacing puts the controller at /posts/posts for the purpose of testing.

Answer 1

I'm assuming you're testing your engine with a dummy rails app, like the one that would be generated by enginex.

Your engine should be mounted in the dummy app:

In spec/dummy/config/routes.rb:

Dummy::Application.routes.draw do
  mount Posts::Engine => '/posts-prefix'
end

My second assumption is that your engine is isolated:

In lib/posts.rb:

module Posts
  class Engine < Rails::Engine
    isolate_namespace Posts
  end
end

I don't know if these two assumptions are really required, but that is how my own engine is structured.

The workaround is quite simple, instead of this

get :show, :id => 1

use this

get :show, {:id => 1, :use_route => :posts}

The :posts symbol should be the name of your engine and NOT the path where it is mounted.

This works because the get method parameters are passed straight to ActionDispatch::Routing::RouteSet::Generator#initialize (defined here), which in turn uses @named_route to get the correct route from Rack::Mount::RouteSet#generate (see here and here).

Plunging into the rails internals is fun, but quite time consuming, I would not do this every day ;-) .

HTH

Answer 2

I worked around this issue by overriding the get, post, put, and delete methods that are provided, making it so they always pass use_route as a parameter.

I used Benoit's answer as a basis for this. Thanks buddy!

module ControllerHacks
  def get(action, parameters = nil, session = nil, flash = nil)
    process_action(action, parameters, session, flash, "GET")
  end

  # Executes a request simulating POST HTTP method and set/volley the response
  def post(action, parameters = nil, session = nil, flash = nil)
    process_action(action, parameters, session, flash, "POST")
  end

  # Executes a request simulating PUT HTTP method and set/volley the response
  def put(action, parameters = nil, session = nil, flash = nil)
    process_action(action, parameters, session, flash, "PUT")
  end

  # Executes a request simulating DELETE HTTP method and set/volley the response
  def delete(action, parameters = nil, session = nil, flash = nil)
    process_action(action, parameters, session, flash, "DELETE")
  end

  private

  def process_action(action, parameters = nil, session = nil, flash = nil, method = "GET")
    parameters ||= {}
    process(action, parameters.merge!(:use_route => :my_engine), session, flash, method)
  end
end

RSpec.configure do |c|
  c.include ControllerHacks, :type => :controller
end

Answer 3

Use the rspec-rails routes directive:

describe MyEngine::WidgetsController do
  routes { MyEngine::Engine.routes }

  # Specs can use the engine's routes & named URL helpers
  # without any other special code.
end

– RSpec Rails 2.14 official docs.

Answer 4

Based on this answer I chose the following solution:

#spec/spec_helper.rb
RSpec.configure do |config|
 # other code
 config.before(:each) { @routes = UserManager::Engine.routes }
end

The additional benefit is, that you don't need to have the before(:each) block in every controller-spec.

Answer 5

Solution for a problem when you don't have or cannot use isolate_namespace:

module Posts
  class Engine < Rails::Engine
  end
end

In controller specs, to fix routes:

get :show, {:id => 1, :use_route => :posts_engine}   

Rails adds _engine to your app routes if you don't use isolate_namespace.

Answer 6

I'm developing a gem for my company that provides an API for the applications we're running. We're using Rails 3.0.9 still, with latest Rspec-Rails (2.10.1). I was having a similar issue where I had defined routes like so in my Rails engine gem.

match '/companyname/api_name' => 'CompanyName/ApiName/ControllerName#apimethod'

I was getting an error like

ActionController::RoutingError:
 No route matches {:controller=>"company_name/api_name/controller_name", :action=>"apimethod"}

It turns out I just needed to redefine my route in underscore case so that RSpec could match it.

match '/companyname/api_name' => 'company_name/api_name/controller_name#apimethod'

I guess Rspec controller tests use a reverse lookup based on underscore case, whereas Rails will setup and interpret the route if you define it in camelcase or underscore case.

Answer 7

It was already mentioned about adding routes { MyEngine::Engine.routes }, although it's possible to specify this for all controller tests:

# spec/support/test_helpers/controller_routes.rb
module TestHelpers
  module ControllerRoutes
    extend ActiveSupport::Concern

    included do
      routes { MyEngine::Engine.routes }
    end

  end
end

and use in rails_helper.rb:

RSpec.configure do |config|
  config.include TestHelpers::ControllerRoutes, type: :controller
end