I'm a total noob on trying to install things through Command line. I recently installed Node (the most recent version, under version id 9.20). I am in the middle of trying to install /setup GECKO for auto trading. And it requires installing SQLite3. I'm following the directions to setup gecko from this link:
https://www.youtube.com/watch?v=R68IwVujju8
And I'm at the step where you type from the command line : npm = install
However after it starts downloading some files it reaches several "ERR!" statements and cuts off. Here is the output:
(P. S. I have tried using just "npm install" and I've tried using "npm install sqlite3", both are give the same errors in the end.
C:\Users\fable187\Downloads\gekko-stable\gekko-stable>npm install sqlite3
[email protected] install C:\Users\fable187\Downloads\gekko-stable\gekko-stable\node_modules\sqlite3 node-pre-gyp install --fallback-to-build
node-pre-gyp ERR! Tried to download(403): https://mapbox-node-binary.s3.amazonaws.com/sqlite3/v3.1.13/node-v59-win32-x64.tar.gz node-pre-gyp ERR! Pre-built binaries not found for [email protected] and [email protected] (node-v59 ABI) (falling back to source compile with node-gyp)
C:\Users\fable187\Downloads\gekko-stable\gekko-stable\node_modules\sqlite3>if not defined npm_config_node_gyp (node "C:\Program Files\nodejs\node_modules\npm\bin\node-gyp-bin\....\node_modules\node-gyp\bin\node-gyp.js" clean ) else (node "" clean )
C:\Users\fable187\Downloads\gekko-stable\gekko-stable\node_modules\sqlite3>if not defined npm_config_node_gyp (node "C:\Program Files\nodejs\node_modules\npm\bin\node-gyp-bin\....\node_modules\node-gyp\bin\node-gyp.js" configure --fallback-to-build --module=C:\Users\fable187\Downloads\gekko-stable\gekko-stable\node_modules\sqlite3\lib\binding\node-v59-win32-x64\node_sqlite3.node --module_name=node_sqlite3 --module_path=C:\Users\fable187\Downloads\gekko-stable\gekko-stable\node_modules\sqlite3\lib\binding\node-v59-win32-x64 --msvs_version=2017 ) else (node "" configure --fallback-to-build --module=C:\Users\fable187\Downloads\gekko-stable\gekko-stable\node_modules\sqlite3\lib\binding\node-v59-win32-x64\node_sqlite3.node --module_name=node_sqlite3 --module_path=C:\Users\fable187\Downloads\gekko-stable\gekko-stable\node_modules\sqlite3\lib\binding\node-v59-win32-x64 --msvs_version=2017 )
gyp ERR! configure error
gyp ERR! stack Error: Can't find Python executable "C:\Users\fable187\AppData\Local\Programs\Python\Python35\python.EXE", you can set the PYTHON env variable.
gyp ERR! stack at PythonFinder.failNoPython (C:\Program Files\nodejs\node_modules\npm\node_modules\node-gyp\lib\configure.js:483:19)
gyp ERR! stack at PythonFinder. (C:\Program Files\nodejs\node_modules\npm\node_modules\node-gyp\lib\configure.js:508:16)
gyp ERR! stack at C:\Program Files\nodejs\node_modules\npm\node_modules\graceful-fs\polyfills.js:284:29
gyp ERR! stack at FSReqWrap.oncomplete (fs.js:166:21)
gyp ERR! System Windows_NT 10.0.16299
gyp ERR! command "C:\Program Files\nodejs\node.exe" "C:\Program Files\nodejs\node_modules\npm\node_modules\node-gyp\bin\node-gyp.js" "configure" "--fallback-to-build" "--module=C:\Users\fable187\Downloads\gekko-stable\gekko-stable\node_modules\sqlite3\lib\binding\node-v59-win32-x64\node_sqlite3.node" "--module_name=node_sqlite3" "--module_path=C:\Users\fable187\Downloads\gekko-stable\gekko-stable\node_modules\sqlite3\lib\binding\node-v59-win32-x64" "--msvs_version=2017"
gyp ERR! cwd C:\Users\fable187\Downloads\gekko-stable\gekko-stable\node_modules\sqlite3
gyp ERR! node -v v9.2.0
gyp ERR! node-gyp -v v3.6.2
gyp ERR! not ok
node-pre-gyp ERR! build error
node-pre-gyp ERR! stack Error: Failed to execute 'node-gyp.cmd configure --fallback-to-build --module=C:\Users\fable187\Downloads\gekko-stable\gekko-stable\node_modules\sqlite3\lib\binding\node-v59-win32-x64\node_sqlite3.node --module_name=node_sqlite3 --module_path=C:\Users\fable187\Downloads\gekko-stable\gekko-stable\node_modules\sqlite3\lib\binding\node-v59-win32-x64 --msvs_version=2017' (1)
node-pre-gyp ERR! stack at ChildProcess. (C:\Users\fable187\Downloads\gekko-stable\gekko-stable\node_modules\sqlite3\node_modules\node-pre-gyp\lib\util\compile.js:83:29)
node-pre-gyp ERR! stack at ChildProcess.emit (events.js:159:13)
node-pre-gyp ERR! stack at maybeClose (internal/child_process.js:943:16)
node-pre-gyp ERR! stack at Process.ChildProcess._handle.onexit (internal/child_process.js:220:5)
node-pre-gyp ERR! System Windows_NT 10.0.16299
node-pre-gyp ERR! command "C:\Program Files\nodejs\node.exe" "C:\Users\fable187\Downloads\gekko-stable\gekko-stable\node_modules\sqlite3\node_modules\node-pre-gyp\bin\node-pre-gyp" "install" "--fallback-to-build"
node-pre-gyp ERR! cwd C:\Users\fable187\Downloads\gekko-stable\gekko-stable\node_modules\sqlite3
node-pre-gyp ERR! node -v v9.2.0
node-pre-gyp ERR! node-pre-gyp -v v0.6.38
node-pre-gyp ERR! not ok
Failed to execute 'node-gyp.cmd configure --fallback-to-build --module=C:\Users\fable187\Downloads\gekko-stable\gekko-stable\node_modules\sqlite3\lib\binding\node-v59-win32-x64\node_sqlite3.node --module_name=node_sqlite3 --module_path=C:\Users\fable187\Downloads\gekko-stable\gekko-stable\node_modules\sqlite3\lib\binding\node-v59-win32-x64 --msvs_version=2017' (1)
npm ERR! code ELIFECYCLE
npm ERR! errno 1
npm ERR! [email protected] install: node-pre-gyp install --fallback-to-build
npm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the [email protected] install script.
npm ERR! This is probably not a problem with npm. There is likely additional logging output above.
npm ERR! A complete log of this run can be found in: npm ERR! C:\Users\fable187\AppData\Roaming\npm-cache_logs\2017-12-03T08_00_31_371Z-debug.log
C:\Users\fable187\Downloads\gekko-stable\gekko-stable>
