Compression formats with good support for random access within archives?

Question

This is similar to a previous question, but the answers there don't satisfy my needs and my question is slightly different:

I currently use gzip compression for some very large files which contain sorted data. When the files are not compressed, binary search is a handy and efficient way to support seeking to a location in the sorted data.

But when the files are compressed, things get tricky. I recently found out about zlib's Z_FULL_FLUSH option, which can be used during compression to insert "sync points" in the compressed output (inflateSync() can then begin reading from various points in the file). This is OK, though files I already have would have to be recompressed to add this feature (and strangely gzip doesn't have an option for this, but I'm willing to write my own compression program if I must).

It seems from one source that even Z_FULL_FLUSH is not a perfect solution...not only is it not supported by all gzip archives, but the very idea of detecting sync points in archives may produce false positives (either by coincidence with the magic number for sync points, or due to the fact that Z_SYNC_FLUSH also produces sync points but they are not usable for random access).

Is there a better solution? I'd like to avoid having auxiliary files for indexing if possible, and explicit, default support for quasi-random access would be helpful (even if it's large-grained--like being able to start reading at each 10 MB interval). Is there another compression format with better support for random reads than gzip?

Edit: As I mentioned, I wish to do binary search in the compressed data. I don't need to seek to a specific (uncompressed) position--only to seek with some coarse granularity within the compressed file. I just want support for something like "Decompress the data starting roughly 50% (25%, 12.5%, etc.) of the way into this compressed file."

Answer 1

I don't know of any compressed file format which would support random access to a specific location in the uncompressed data (well, except for multimedia formats), but you can brew your own.

For example, bzip2 compressed files are composed of independent compressed blocks of size <1MB uncompressed, which are delimited by sequences of magic bytes, so you could parse the bzip2 file, get the block boundaries and then just uncompress the right block. This would need some indexing to remember where do the blocks start.

Still, I think the best solution would be to split your file into chunks of your choice, and then compressing it with some archiver, like zip or rar, which support random access to individual files in the archive.

Answer 2

Take a look at dictzip. It is compatible with gzip and allows coarse random access.

An excerpt from its man page:

dictzip compresses files using the gzip(1) algorithm (LZ77) in a manner which is completely compatible with the gzip file format. An extension to the gzip file format (Extra Field, described in 2.3.1.1 of RFC 1952) allows extra data to be stored in the header of a compressed file. Programs like gzip and zcat will ignore this extra data. However, [dictzcat --start] will make use of this data to perform pseudo-random access on the file.

I have the package dictzip in Ubuntu. Or its source code is in a dictd-*.tar.gz. Its license is GPL. You are free to study it.

Update:

I improved dictzip to have no file size limit. My implementation is under MIT license.

Answer 3

The .xz file format (which uses LZMA compression) seems to support this:

Random-access reading: The data can be split into independently compressed blocks. Every .xz file contains an index of the blocks, which makes limited random-access reading possible when the block size is small enough.

This should be sufficient for your purpose. A drawback is that the API of liblzma (for interacting with these containers) does not seem that well-documented, so it may take some effort figuring out how to randomly access blocks.

Answer 4

Solutions exist for providing random access to gzip and bzip2 archives:

• gzip zran.c from the zlib source code
• bzip2 Node.JS version of seek-bzip (The original C version by James Taylor seems to have disappeared from the internet...)

(I'm looking for something for 7zip)

Answer 5

bgzip can compress files in a gzip variant which is indexable (and can be decompressed by gzip). This is used in some bioinformatics applications, together with the tabix indexer.

See explanations here: http://blastedbio.blogspot.fr/2011/11/bgzf-blocked-bigger-better-gzip.html, and here: http://www.htslib.org/doc/tabix.html.

I don't know to what extent it is adaptable to other applications.

Answer 6

The gzip format can be randomly accessed provided an index has been previously created, as it is demonstrated on zlib's zran.c source code.

I've developed a command line tool upon zlib's zran.c which creates indexes for gzip files: https://github.com/circulosmeos/gztool

It can even create an index for a still-growing gzip file (for example a log created by rsyslog directly in gzip format) thus reducing in the practice to zero the time of index creation. See the -S (Supervise) option.

Answer 7

I'm not sure if this would be practical in your exact situation, but couldn't you just gzip each large file into smaller files, say 10 MB each? You would end up with a bunch of files: file0.gz, file1.gz, file2.gz, etc. Based on a given offset within the original large, you could search in the file named "file" + (offset / 10485760) + ".gz". The offset within the uncompressed archive would be offset % 10485760.

Answer 8

Because lossless compression works better on some areas than others, if you store compressed data into blocks of convenient length BLOCKSIZE, even though each block has exactly the same number of compressed bytes, some compressed blocks will expand to a much longer piece of plaintext than others.

You might look at "Compression: A Key for Next-Generation Text Retrieval Systems" by Nivio Ziviani, Edleno Silva de Moura, Gonzalo Navarro, and Ricardo Baeza-Yates in Computer magazine November 2000 http://doi.ieeecomputersociety.org/10.1109/2.881693

Their decompressor takes 1, 2, or 3 whole bytes of compressed data and decompresses (using a vocabulary list) into a whole word. One can directly search the compressed text for words or phrases, which turns out to be even faster than searching uncompressed text.

Their decompressor lets you point to any word in the text with a normal (byte) pointer and start decompressing immediately from that point.

You can give every word a unique 2 byte code, since you probably have less than 65,000 unique words in your text. (There are almost 13,000 unique words in the KJV Bible). Even if there are more than 65,000 words, it's pretty simple to assign the first 256 two-byte code "words" to all possible bytes, so you can spell out words that aren't in the lexicon of the 65,000 or so "most frequent words and phrases". (The compression gained by packing frequent words and phrases into two bytes is usually worth the "expansion" of occasionally spelling out a word using two bytes per letter). There are a variety of ways to pick a lexicon of "frequent words and phrases" that will give adequate compression. For example, you could tweak a LZW compressor to dump "phrases" it uses more than once to a lexicon file, one line per phrase, and run it over all your data. Or you could arbitrarily chop up your uncompressed data into 5 byte phrases in a lexicon file, one line per phrase. Or you could chop up your uncompressed data into actual English words, and put each word -- including the space at the beginning of the word -- into the lexicon file. Then use "sort --unique" to eliminate duplicate words in that lexicon file. (Is picking the perfect "optimum" lexicon wordlist still considered NP-hard?)

Store the lexicon at the beginning of your huge compressed file, pad it out to some convenient BLOCKSIZE, and then store the compressed text -- a series of two byte "words" -- from there to the end of the file. Presumably the searcher will read this lexicon once and keep it in some quick-to-decode format in RAM during decompression, to speed up decompressing "two byte code" to "variable-length phrase". My first draft would start with a simple one line per phrase list, but you might later switch to storing the lexicon in a more compressed form using some sort of incremental coding or zlib.

You can pick any random even byte offset into the compressed text, and start decompressing from there. I don't think it's possible to make a finer-grained random access compressed file format.

Answer 9

Two possible solutions:

1. Let the OS deal with compression, create and mount a compressed file system (SquashFS, clicfs, cloop, cramfs, e2compr or whatever) containing all your text files and don't do anything about compression in your application program.

2. Use clicfs directly on each text file (one clicfs per text file) instead of compressing a filesystem image. Think of "mkclicfs mytextfile mycompressedfile" being "gzip <mytextfile >mycompressedfile" and "clicfs mycompressedfile directory" as a way of getting random access to the data via the file "directory/mytextfile".

Answer 10

This is a very old question but it looks like zindex could provide a good solution (although I don't have much experience with it)

Answer 11

I don't know if its been mentioned yet, but the Kiwix project had done great work in this regard. Through their program Kiwix, they offer random access to ZIM file archives. Good compression, too. The project originated when there was a demand for offline copies of the Wikipedia (which has reached above 100 GB in uncompressed form, with all media included). They have successfully taken a 25 GB file (a single-file embodiment of the Wikipedia without most of the media) and compressed it to a measly 8 GB zim file archive. And through the Kiwix program, you can call up any page of the Wikipedia, with all associated data, faster than you can surfing the net.

Even though Kiwix program is a technology based around the Wikipedia database structure, it proves that you can have excellent compression ratios and random access simultaneously.

Answer 12

razip supports random access with better performance than gzip/bzip2 which have to be tweaked for this support - reducing compression at the expense of "ok" random access:

http://sourceforge.net/projects/razip/

Answer 13

I am the author of an open-source tool for compressing a particular type of biological data. This tool, called starch, splits the data by chromosome and uses those divisions as indices for fast access to compressed data units within the larger archive.

Per-chromosome data are transformed to remove redundancy in genomic coordinates, and the transformed data are compressed with either bzip2 or gzip algorithms. The offsets, metadata and compressed genomic data are concatenated into one file.

Source code is available from our GitHub site. We have compiled it under Linux and Mac OS X.

For your case, you could store (10 MB, or whatever) offsets in a header to a custom archive format. You parse the header, retrieve the offsets, and incrementally fseek through the file by current_offset_sum + header_size.