Extract pointclouds WITH colour using the Project Tango; i.e. getting the current camera frame

Question

I am trying to produce a point cloud where each point has a colour. I can get just the point cloud or I can get the camera to take a picture, but I need them to be as simultaneous as possible. If I could look up an RGB image with a timestamp or call a function to get the current frame when onXYZijAvailable() is called I would be done. I could just go over the points, find out where it would intersect with the image plane and get the colour of that pixel.

As it is now I have not found any way to get the pixel info of an image or get coloured points. I have seen AR apps where the camera is connected to the CameraView and then things are rendered on top, but the camera stream is never touched by the application.

According to this post it should be possible to get the data I want and synchronize the point cloud and the image plane by a simple transformation. This post is also saying something similar. However, I have no idea how to get the RGB data. I cant find any open source projects or tutorials.

The closest I have gotten is finding out when a frame is ready by using this:

     public void onFrameAvailable(final int cameraId) {
          if (cameraId == TangoCameraIntrinsics.TANGO_CAMERA_COLOR) {
               //Get the new rgb frame somehow.
          }
     }

I am working with the Java API and I would very much like to not delve into JNI and the NDK if at all possible. How can I get the frame that most closely matches the timestamp of my current point cloud?

Thank you for your help.

Update:

I implemented a CPU version of it and even after optimising it a bit I only managed to get .5 FPS on a small point cloud. This is also due to the fact that the colours have to be converted from the android native NV21 colour space to the GPU native RGBA colour space. I could have optimized it further, but I am not going to get a real time effect with this. The CPU on the android device simply can not perform well enough. If you want to do this on more than a few thousand points, go for the extra hassle of using the GPU or do it in post.

rhashimoto rhashimoto · Accepted Answer · 2015-12-10T22:07:12

Tango normally delivers color pixel data directly to an OpenGLES texture. In Java, you create the destination texture and register it with Tango.connectTextureId(), then in the onFrameAvailable() callback you update the texture with Tango.updateTexture(). Once you have the color image in a texture, you can access it using OpenGLES drawing calls and shaders.

If your goal is to color a Tango point cloud, the most efficient way to do this is in the GPU. That is, instead of pulling the color image out of the GPU and accessing it in Java, you instead pass the point data into the GPU and use OpenGLES shaders to transform the 3D points into 2D texture coordinates and look up the colors from the texture. This is rather tricky to get right if you're doing it for the first time but may be required for acceptable performance.

If you really want direct access to pixel data without using the C API, you need to render the texture into a buffer and then read the color data from the buffer. It's kind of tricky if you aren't used to OpenGL and writing shaders, but there is an Android Studio app that demonstrates that here, and is further described in this answer. This project demonstrates both how to draw the camera texture to the screen, and how to draw to an offscreen buffer and read RGBA pixels.

If you really want direct access to pixel data but decide that the NDK might be less painful than OpenGLES, the C API has TangoService_connectOnFrameAvailable() which gives you pixel data directly, i.e. without going through OpenGLES. Note, however, that the format of the pixel data is NV21, not RGB or RGBA.

Extract pointclouds WITH colour using the Project Tango; i.e. getting the current camera frame

2 Answers