26
votes

I release a single executable (.EXE) for a desktop program using Delphi 2009. I have no external DLLs or resources that I need for the program to run.

I use two components: LMD Innovative's ELPack and Sergey Tkachenko's TRichView that are compiled into my executable.

When I build my production version, using the "Release" build configuration, the executable file produced is 13,533 KB.

Prior to using Delphi 2009, I was using Delphi 4. The executable it produced was only 2,671 KB while incorporating the same two components and basically having the same code as my current version.

I do understand that Delphi 2009 is completely Unicode (which is the main reason why I upgraded), and being Unicode can cause up to a doubling of size. But this is about 5 times larger.

Is there a reason why my executable has to remain 5 times larger? Or are there some simple ways to cut down a significant chunk of the executable size?


Please note. Some people are answering with ways to compress the Delphi EXE. That is not what I am trying to do. I am trying to simply see why so much space is being used to remove what might not be necessary. If that is done, compression can still be done afterwards if so desired.

It really doesn't matter how big or small the executable is once it is installed. It is for downloading purposes and to minimize server load and download times that you want to compress it. I prefer to use Inno Setup and compress the program inside the install routine itself. Then when it is installed, it is expanded to full size. That both prevents possible detection as a virus and eliminates the extra startup time needed to uncompress the program in memory. Also I code sign both my executable and my install routine and some compression techniques are incompatible with that.

For more info about compressing, see the StackOverflow question: Delphi EXE compressor?


ldsandon asked me to provide exactly what options I'm using, so here they are:

Compiling Options
(source: beholdgenealogy.com)

Linking Options
(source: beholdgenealogy.com)

16
Which compiler switch are you currently using? Those impacting code size most are those adding debug information or control code to the project.user160694
@splash: I have about 400 KB of my own code in about 20 units. They include 14 forms that use about 500 KB for the dfm files. That does not include the code in two components I use.lkessler
@ldsandon: I think I'm using all the defaults for the "Release" build configuration.lkessler
I no longer know what the defaults are because those out of the box are not "correct" and I changed them and made another default. IIRC they have optimization enabled, but add some debug info anyway, have string format checking on, and so on. It would be useful to know what options you're using actually.user160694
Try DebugDCUs = OFF, Map File = OFFarthurprs

16 Answers

14
votes

When moving from Delphi 7 to Delphi 2010., our .exe's grew for example from 16 megs to 35 megs.

I asked a question similar to yours on the Embarcadero forum a few weeks ago. (link) In my OP, I listed a series of links on this subject that you might find helpful.

We tried using UPX to compress our .exe's. Letting it work for hours significantly reduced our .exe, but we probably won't use it in production for these reasons:

  1. We have quite a few .exe's and don't want to wait 1/2-day on each build. (It's possible that we could find a non-brute force set of parameters to UPX that would reduce this...)

  2. Although the size of the .exe is reduced, our shippable was not, because our installer (not surprisingly) is unable squeeze much more compression out of the already compressed file... whereas it was able to reduce the original 16 meg .exe down to 8 megs.

  3. I've read some reports that at some time (rarely, but not never), UPX exe's triggered various anti-virus programs to report the application contained a virus. (I don't recall the date, site, or details of where I saw this, so it's a bit unfair of me to report it here.) But, we are so adverse to taking a risk of that even possibility happening, that UPX is off the table...

The link on the Embarcadero forum also includes a link to another SO thread on this topic.

I continue to be surprised and disappointed at the code bloat we found when moving to Delphi 2010. As Nick notes, 2X for Unicode is quite excessive.

However, the bloat is a relatively minor trade-off when moving to D2010, because, IMO, D2010 is such a terrific upgrade in so many other ways. But, it does mean that we'll probably have to move to shipping 2 CDs rather than one. I'm not looking forward to seeing the reaction to this from our organization...

10
votes

Without seeing the actual settings that your "Release" build configuration uses explaining this increase in size requires a great deal of speculation.

Beyond some perhaps unlikely factors resulting in a vast increase in the amount of code being "dragged in" even though it isn't used, that magnitude of increase would most easily be explained by the inclusion of debug information.

I would check your compiler and linker settings for:

  • Debug Information (compiler setting)
  • TD32 info (linker)
  • Remote debug info (linker)

Compare these settings in your Delphi 2009 project with the equivalents in Delphi 4.

7
votes

Factor out the expected 2X increase from Unicode and you end up with a 2.5X increase unaccounted for. This makes sense considering how many versions you've skipped. A lot's been added to the VCL and RTL since Delphi 4, and not all of it is stuff that can be easily smartlinked out, even if you never use it. Depending on how many units you're using, you could be hauling in quite a bit of extra baggage.

Allen Bauer and the compiler team added a new feature into D2010 to help reduce this, but apparently they're treading cautiously and didn't use it in as many places as they could have. Hopefully we'll see more cruft reduction in 2011 and subsequent releases.

7
votes

I will add my few words. Linker can remove unused procedures and functions only if it can follow the code hierarchy. The nightmare list for linker listed below:

  • Message-driven code, the sad news is that this code can't be removed whatsoever, that's why Delphi blank project size continues growing from version to version. Every new windows message (WM_TOUCH for example as long as I know introduced recently) creates procedure call hierarchy that can't be removed (even if you don't have plan to use Touch API at all). This is because every case WM_: fragment is something linker can't decide whether it will be used or not.

  • Code and data structures accessed from the begin end, initialization, finalization secions of the units. Here you have some control, remove unnecessary calls or object creation. Even if you create objects on demand and only free them in finalization section, make it carefully

5
votes

Use "upx - compress or expand executable files" @ http://upx.sourceforge.net


If you go to tools/configure tools, and set it up like this, you can compress the executable that you're working on easily via a menu item in the IDE.

Configuration

4
votes

Another way is to have a look to 'what unit increase the size ?'.

To do this, I use the JCL 'Project Analyser IDE', integrated in the IDE with the JCL/JVCL installation, it show you all the units with their respective size. You can export it in text file. If you do it with the 2 environnements (D4 & D2009) you will have a lot of pertinent informations.

4
votes

I've done some tests to see the difference between D2007 and D2010, because we are upgrading to D2010. I've tested a medium sized management GUI application, with about 60 forms (grids with detail forms, frames, etc). We're using TMS components + Remobjects.

D2007:
"normal" compilation: 18.8mb
with debug dcu's: 18.8mb (same size!)

D2010
normal: 23.9
debug dcu's: 48.8mb (!)

So using debug dcu's doubles our exe size...

Test with our business service (no big dfm's):
D2007: 12.3mb
D2010: 17.1mb

So yes, D2010 increases the exe (a bit), but this is not a problem for my customer.

Edit: some information about compiled size:
D2007:
alt text
D2010:
alt text

So an increase of code size, but a more than doubling of the data!

3
votes

Check format of your dfm-s. They must be in binary format if you want to make your exe smaller.

2
votes

If you don't want to use an exe compressor then you should give StripReloc a try.

2
votes

1) You are generating a detailed map file, and because you've set "used debug dcus" it will also contains symbols for the RTL/VCL units. If it is used by an exception handling systems to generate call stacks and the like, it could be added to the executable. And if not compressed somehow, it could make your .exe size pretty large.

2) Using debug dcus will also make your .exe somewhat larger because usually they are compiled without optimization and debug options set, and they will make also your code slower. They shouldn't be used in a release version.

3) Debug information should add debig info only to the unit and not to the executable, although it is required IIRC to generate the map file.

1
votes

Since D2010 adds extended RTTI, and RTTI is a notorious factor in increasing exe size, it would be interesting to see how big D2009 binaries are for that application.

If D2009 binaries are significantly smaller, it is not Unicode etc. For my own binaries, I only have a 30% increase or so going from D7 to D2009.

1
votes

It has been stated earlier that using an executable compresser reduces the size of the exe but not of the install package. However, if you want a good compressor then try ASPack.

@Tom1952: ASPack is pretty fast, just a few seconds to compress a file

1
votes

Also you can change the Icon. Icon in newest delphi IDE (ie XE3) is Vista/7 compatible and contains all sizes (up to 256x256 as far as I know). So you can reduce exe file size with changing the Icon.

0
votes

The standard units in you newer delphi may contain more strings and constants such as error strings, that is included even if you disable debug information. Check your uses.

Don't have much of a somution besides not using a specific unit, or removing unneeded data from it.

(My experiences are with Delphi 5)

0
votes

For Delphi 10.3 Rio with default setiings:

Step 1: Switch from Debug to Release in "Projects" window. This reduced my exe file from 22 MB to 5 MB !

Step 2: Use an exe compresor like ASPack. It further reduced my exe file to 1.3 MB. Unbelievable, isn't it ? :)

-1
votes

Uncheck debug information in project options. If embarcadero can't provide any solution or explanation!!! I think the solution is simple: don't stuck only with Delphi there is a lot of programming languages, every one is limited only by programmer imagination.