So I installed Anaconda and everything is working. After I installed it I decided to switch to oh-my-zsh. I am now getting:
zsh: command not found: conda
when trying to use pip or conda installs
echo $ZSH_VERSION
5.0.5
I have added to my zshenv.sh
export PATH ="/Users/Dz/anaconda/bin:$PATH"
What is it that I'm missing?
If you are on macOS Catalina, the new default shell is zsh. You will need to run source /bin/activate followed by conda init zsh.
For example: I installed anaconda python 3.7 Version, type echo $USER to find username
source /Users/my_username/opt/anaconda3/bin/activate
Follow by
conda init zsh
or (for bash shell)
conda init
Check working:
conda list
The error will be fixed.
As of today Nov 4, 2018 all the following methods works, install the zsh with:
sh -c "$(curl -fsSL https://raw.githubusercontent.com/robbyrussell/oh-my-zsh/master/tools/install.sh)"
Not recommending brew installation for zsh:
brew install zsh zsh-completions
P.S: Tried with with brew and brew install under the root and is not an wise idea to do so due the security and all time anything related will need to be started under sudo so better is to stick with curl or wget.
to make work conda in OS X with oh-my-zsh installed is to add path as following and will work.
Find the python paths so can see if you installed Anaconda2 or Anaconda3:
where pythonorwhich pythonwill result in similar output:
/usr/bin/python
/Users/"username"/anaconda3/bin/python
/usr/bin/python
Finding your Anaconda Python interpreter path
vi ~/.zshrc or gedit ~/.zshrc
For Anaconda: at field
# User configurationadd:
PATH="$HOME/anaconda/bin:$PATH"For Anaconda2 at field
# User configurationadd:
PATH="$HOME/anaconda/bin:$PATH"For Anaconda3 at field
# User configurationadd:
PATH="$HOME/anaconda3/bin:$PATH"or replace "username" with your username:
PATH="/Users/"username"/anaconda3/bin:$PATH
According to documentation Installing on macOS we add add in
~/.zshrcinstead of.bashrc or .bash_profile
Add export
PATH="/<path to anaconda>/bin:$PATH"in ~/.zshrcOr set the PATH variable:
export PATH="/<path to anaconda>/bin:$PATH"Replace
“<path to anaconda>”with the actual path to your Anaconda installation.This methods are working on ubuntu/Centos7/MacOS as well (just close/reset the terminal once you are completing the changes) than just type conda to test.
Per @truongnm comment just source after adding the path: "I pasted the path from my bash_profile, and don't forget to
source ~/.zshrc"
It appears that my PATH is broken in my .zshrc file.
Open it and add :
export PATH="$PATH;/Users/Dz/anaconda/bin:/usr/local/bin:/usr/bin:/bin:/usr/sbin:/sbin:/opt/X11/bin:/Users/Dz/.rvm/bin"
Doh! Well that would explain everything. How did I miss that little semicolon? Changed:
export PATH="$PATH:/Users/Dz/anaconda/bin:/usr/local/bin:/usr/bin:/bin:/usr/sbin:/sbin:/opt/X11/bin:/Users/Dz/.rvm/bin"
source ~/.zshrc
echo $HOME
echo $PATH
We're good now.
I had this problem on my Catalina OSX after I installed my Anaconda distribution as well.
This solution worked for me on macOS Catalina as of October 19, 2019
Step 1. Check if .bash_profile is available on your home folder, if not:
cd ~/ to go to your home folder (if you are not on your home folder)touch .bash_profile to create your new file under the your home folderStep 2. Check if file .zshrc is available on your home folder, if not:
Go to terminal and type nano ~/.zshrc
Type in the following line into the newly created .zshrc file: source ~/.bash_profile
Now to save the file in nano just hit ctrl+X.
It will prompt "Save modified buffer (ANSWERING "No" WILL DESTROY CHANGES)?". Just type in Y
Step 3. Check if .bash_profile and .zshrc files are created on your home folder. If yes, in terminal type in source ~/.zshrc
You should do the following:
1. /home/$USER/anaconda/bin/conda init zsh (or /home/$USER/miniconda3/bin/conda init zsh if you use miniconda)
2. source ~/.zshrc (or just reopen terminal)
Why this answer is better than others?
~/.bash_profile doesn't exist (my case, only ~/.bashrc)~/.bash_profileI just ran into the same problem. As implicitly stated inside the .zshrc-file (in your user-root-folder), you need to migrate the pathes you've already inserted in your .bash_profile, bashrc or so to resolve this.
Copying all additional pathes from .bash_profile to .zshrc fixed it for me, cause zsh now knows where to look.
#add path to Anaconda-bin
export PATH="/Users/YOURUSERNAME!!/anaconda3/bin:$PATH"
#N.B. for miniconda use
export PATH="/Users/YOURUSERNAME!!!/miniconda3/bin:$PATH"
Depending on where you installed anaconda this path might be different.
If this problem occurs on a mac, then type the following commands:
source <path to conda>/bin/activate
conda init zsh
This will modify your zshrc accordingly (or create it if it does not exist).
This solution comes from the official anaconda doc.
If anaconda is fully updated, a simple "conda init zsh" should work. Navigate into the anaconda3 folder using
cd /path/to/anaconda3/
of course replacing "/path/to/anaconda/" with "~/anaconda3" or "/anaconda3" or wherever the "anaconda3" folder is kept.
To make sure it's updated, run
./bin/conda update --prefix . anaconda
After this, running
./bin/conda init zsh
(or whatever shell you're using) will finish the job cleanly.
Find the right version of your anaconda
Put it to ~/.zshrc via command vim ~/.zshrc
export PATH="/User/<your-username>/anaconda2/bin:$PATH"export PATH="/User/<your-username>/anaconda3/bin:$PATH"export PATH="/anaconda2/bin:$PATH"export PATH="/anaconda3/bin:$PATH"Restart the zsh source ~/.zshrc
I simply added the anaconda3 path to $PATH in .zshrc which did the trick for.
My environment : Catalina / clean Anaconda install / iTerm / zsh / oh-my-zsh
First locate your conda installation:
> find ~/ -name 'conda' -print
(on my system: ~/opt/anaconda3/bin/conda)
Then add that path to PATH in the .zshrc file
export PATH="opt/anaconda3/bin":$PATH
Answer for macOS 11 (Big Sur) in 2021
After installing Anaconda, run:
source /opt/anaconda3/bin/activate
conda init zsh
then close and reopen the Terminal window. The shell prompt should have a (base) prefix.
NOTE: I found many articles online saying to update the PATH variable, but Anaconda actually recommends against doing so and running the two commands above instead, which they state in their documentation.
run the following script provided by conda in your terminal:
source /opt/conda/etc/profile.d/conda.sh - you may need to adjust the path to your conda installtion folder.
after that your zsh will recognize conda and you can run conda init this will modify your .zshrc file automatically for you. It will add something like that at the end of it:
# >>> conda initialize >>>
# !! Contents within this block are managed by 'conda init' !!
__conda_setup="$('/opt/conda/bin/conda' 'shell.zsh' 'hook' 2> /dev/null)"
if [ $? -eq 0 ]; then
eval "$__conda_setup"
else
if [ -f "/opt/conda/etc/profile.d/conda.sh" ]; then
. "/opt/conda/etc/profile.d/conda.sh"
else
export PATH="/opt/conda/bin:$PATH"
fi
fi
unset __conda_setup
# <<< conda initialize <<<
source: https://docs.conda.io/projects/conda/en/latest/user-guide/install/rpm-debian.html
So I discovered that in your ~/.zshrc file, there was a commented line,
# If you come from bash you might have to change your $PATH
# export PATH=$HOME/bin:/usr/local/bin:$PATH
Just uncomment the export statement and all your previous bash_profile commands will also be there. If that comment does not exist, you can also just add that export statement to .zshrc file.
# >>> conda init >>>
# !! Contents within this block are managed by 'conda init' !!
__conda_setup="$(CONDA_REPORT_ERRORS=false '/anaconda3/bin/conda' shell.bash hook 2> /dev/null)" if [ $? -eq 0 ]; then
\eval "$__conda_setup" else
if [ -f "/anaconda3/etc/profile.d/conda.sh" ]; then
. "/anaconda3/etc/profile.d/conda.sh"
CONDA_CHANGEPS1=false conda activate base
else
\export PATH="/anaconda3/bin:$PATH"
fi fi unset __conda_setup
# <<< conda init <<<
