If somebody solved this issue, please send me link.
My issue:
I bought 2 arduino nanos (http://www.ebay.com/itm/311064700128?_trksid=p2060353.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT)
When I plugged them into PC, Led started blinking. I decided to try and test it so I wrote a program blink led with a bigger delays etc. I changed things as I should (like 328, arduino nano setting etc.) When I open device manager, ports there is not even an arduino here! And still it doesnt wat to upload itself! My chip mega328P AU1451 (its written under name)
Error message: Quote
Arduino: 1.6.4 (Windows 7), Board: "Arduino Nano, ATmega328"
Sketch uses 1 070 bytes (3%) of program storage space. Maximum is 30 720 bytes.
Global variables use 9 bytes (0%) of dynamic memory, leaving 2 039 bytes for local variables. Maximum is 2 048 bytes.
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x9b
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x9b
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x9b
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x9b
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x9b
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x9b
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x9b
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x9b
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x9b
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x9b
Problem uploading to board. See http://www.arduino.cc/en/Guide/Troubleshooting#upload for suggestions.
This report would have more information with "Show verbose output during compilation" enabled in File > Preferences.
I tried to change programmer settings and it has told this:
avrdude: ser_open(): can't open device "\.\COM1": Prístup je odmietnutý.
(prístup je odmietnutý means acces is denied)
Any ideas how to solve this? Arduino forums didnt answer.
