203
votes

What are all the ways of affecting where Perl modules are searched for? or, How is Perl's @INC constructed?

As we know, Perl uses @INC array containing directory names to determine where to search for Perl module files.

There does not seem to be a comprehensive "@INC" FAQ-type post on StackOverflow, so this question is intended as one.

3
Yeah, but there's a perfectly good one at search.cpan.org/perldoc/…?mob
@mobrule: I don't think that's anywhere near as comprehensive - it's just telling how to add to @INC at runtime, not the full construction.Cascabel
@mobrule - @Jefromi guessed right - the main problem with ANY and all references I found so far was a lack of comprehensive info on perl binary's compiled-in default @INCDVK
Some can make that answer as comprehensive by sending me a patch. It's easy because perlfaq is in Github. :)brian d foy
Well, the "comprehensive info on perl binary's compiled-in default @INC" is that it's the one the person who compiled it set up. If your asking about the various paths that get in there, then I think you have a different question than the one you answered.brian d foy

3 Answers

256
votes

We will look at how the contents of this array are constructed and can be manipulated to affect where the Perl interpreter will find the module files.

  1. Default @INC

    Perl interpreter is compiled with a specific @INC default value. To find out this value, run env -i perl -V command (env -i ignores the PERL5LIB environmental variable - see #2) and in the output you will see something like this:

    $ env -i perl -V
    ...
    @INC:
     /usr/lib/perl5/site_perl/5.18.0/x86_64-linux-thread-multi-ld
     /usr/lib/perl5/site_perl/5.18.0
     /usr/lib/perl5/5.18.0/x86_64-linux-thread-multi-ld
     /usr/lib/perl5/5.18.0
     .
    

Note . at the end; this is the current directory (which is not necessarily the same as the script's directory). It is missing in Perl 5.26+, and when Perl runs with -T (taint checks enabled).

To change the default path when configuring Perl binary compilation, set the configuration option otherlibdirs:

Configure -Dotherlibdirs=/usr/lib/perl5/site_perl/5.16.3

  1. Environmental variable PERL5LIB (or PERLLIB)

    Perl pre-pends @INC with a list of directories (colon-separated) contained in PERL5LIB (if it is not defined, PERLLIB is used) environment variable of your shell. To see the contents of @INC after PERL5LIB and PERLLIB environment variables have taken effect, run perl -V.

    $ perl -V
    ...
    %ENV:
      PERL5LIB="/home/myuser/test"
    @INC:
     /home/myuser/test
     /usr/lib/perl5/site_perl/5.18.0/x86_64-linux-thread-multi-ld
     /usr/lib/perl5/site_perl/5.18.0
     /usr/lib/perl5/5.18.0/x86_64-linux-thread-multi-ld
     /usr/lib/perl5/5.18.0
     .
    
  2. -I command-line option

    Perl pre-pends @INC with a list of directories (colon-separated) passed as value of the -I command-line option. This can be done in three ways, as usual with Perl options:

    • Pass it on command line:

      perl -I /my/moduledir your_script.pl
      
    • Pass it via the first line (shebang) of your Perl script:

      #!/usr/local/bin/perl -w -I /my/moduledir
      
    • Pass it as part of PERL5OPT (or PERLOPT) environment variable (see chapter 19.02 in Programming Perl)

  3. Pass it via the lib pragma

    Perl pre-pends @INC with a list of directories passed in to it via use lib.

    In a program:

    use lib ("/dir1", "/dir2");
    

    On the command line:

    perl -Mlib=/dir1,/dir2
    

    You can also remove the directories from @INC via no lib.

  4. You can directly manipulate @INC as a regular Perl array.

    Note: Since @INC is used during the compilation phase, this must be done inside of a BEGIN {} block, which precedes the use MyModule statement.

    • Add directories to the beginning via unshift @INC, $dir.

    • Add directories to the end via push @INC, $dir.

    • Do anything else you can do with a Perl array.

Note: The directories are unshifted onto @INC in the order listed in this answer, e.g. default @INC is last in the list, preceded by PERL5LIB, preceded by -I, preceded by use lib and direct @INC manipulation, the latter two mixed in whichever order they are in Perl code.

References:

There does not seem to be a comprehensive @INC FAQ-type post on Stack Overflow, so this question is intended as one.

When to use each approach?

  • If the modules in a directory need to be used by many/all scripts on your site, especially run by multiple users, that directory should be included in the default @INC compiled into the Perl binary.

  • If the modules in the directory will be used exclusively by a specific user for all the scripts that user runs (or if recompiling Perl is not an option to change default @INC in previous use case), set the users' PERL5LIB, usually during user login.

    Note: Please be aware of the usual Unix environment variable pitfalls - e.g. in certain cases running the scripts as a particular user does not guarantee running them with that user's environment set up, e.g. via su.

  • If the modules in the directory need to be used only in specific circumstances (e.g. when the script(s) is executed in development/debug mode, you can either set PERL5LIB manually, or pass the -I option to perl.

  • If the modules need to be used only for specific scripts, by all users using them, use use lib/no lib pragmas in the program itself. It also should be used when the directory to be searched needs to be dynamically determined during runtime - e.g. from the script's command line parameters or script's path (see the FindBin module for very nice use case).

  • If the directories in @INC need to be manipulated according to some complicated logic, either impossible to too unwieldy to implement by combination of use lib/no lib pragmas, then use direct @INC manipulation inside BEGIN {} block or inside a special purpose library designated for @INC manipulation, which must be used by your script(s) before any other modules are used.

    An example of this is automatically switching between libraries in prod/uat/dev directories, with waterfall library pickup in prod if it's missing from dev and/or UAT (the last condition makes the standard "use lib + FindBin" solution fairly complicated. A detailed illustration of this scenario is in How do I use beta Perl modules from beta Perl scripts?.

  • An additional use case for directly manipulating @INC is to be able to add subroutine references or object references (yes, Virginia, @INC can contain custom Perl code and not just directory names, as explained in When is a subroutine reference in @INC called?).

20
votes

In addition to the locations listed above, the OS X version of Perl also has two more ways:

  1. The /Library/Perl/x.xx/AppendToPath file. Paths listed in this file are appended to @INC at runtime.

  2. The /Library/Perl/x.xx/PrependToPath file. Paths listed in this file are prepended to @INC at runtime.

7
votes

As it was said already @INC is an array and you're free to add anything you want.

My CGI REST script looks like:

#!/usr/bin/perl
use strict;
use warnings;
BEGIN {
    push @INC, 'fully_qualified_path_to_module_wiht_our_REST.pm';
}
use Modules::Rest;
gone(@_);

Subroutine gone is exported by Rest.pm.