What is the difference between ++i and i++?

Question

In C, what is the difference between using ++i and i++, and which should be used in the incrementation block of a for loop?

Answer 1

• ++i will increment the value of i, and then return the incremented value.

   i = 1;
   j = ++i;
   (i is 2, j is 2)
  

• i++ will increment the value of i, but return the original value that i held before being incremented.

   i = 1;
   j = i++;
   (i is 2, j is 1)
  

For a for loop, either works. ++i seems more common, perhaps because that is what is used in K&R.

In any case, follow the guideline "prefer ++i over i++" and you won't go wrong.

There's a couple of comments regarding the efficiency of ++i and i++. In any non-student-project compiler, there will be no performance difference. You can verify this by looking at the generated code, which will be identical.

The efficiency question is interesting... here's my attempt at an answer: Is there a performance difference between i++ and ++i in C?

As @OnFreund notes, it's different for a C++ object, since operator++() is a function and the compiler can't know to optimize away the creation of a temporary object to hold the intermediate value.

Answer 2

i++ is known as Post Increment whereas ++i is called Pre Increment.

i++

i++ is post increment because it increments i's value by 1 after the operation is over.

Lets see the following example:

int i = 1, j;
j = i++;

Here value of j = 1 but i = 2. Here value of i will be assigned to j first then i will be incremented.

++i

++i is pre increment because it increments i's value by 1 before the operation. It means j = i; will execute after i++.

Lets see the following example:

int i = 1, j;
j = ++i;

Here value of j = 2 but i = 2. Here value of i will be assigned to j after the i incremention of i. Similarly ++i will be executed before j=i;.

For your question which should be used in the incrementation block of a for loop? the answer is, you can use any one.. doesn't matter. It will execute your for loop same no. of times.

for(i=0; i<5; i++)
   printf("%d ",i);

And

for(i=0; i<5; ++i)
   printf("%d ",i);

Both the loops will produce same output. ie 0 1 2 3 4.

It only matters where you are using it.

for(i = 0; i<5;)
    printf("%d ",++i);

In this case output will be 1 2 3 4 5.

Answer 3

Please don't worry about the "efficiency" (speed, really) of which one is faster. We have compilers these days that take care of these things. Use whichever one makes sense to use, based on which more clearly shows your intent.

Answer 4

++i increments the value, then returns it.

i++ returns the value, and then increments it.

It's a subtle difference.

For a for loop, use ++i, as it's slightly faster. i++ will create an extra copy that just gets thrown away.

Answer 5

i++: In this scenario first the value is assigned and then increment happens.

++i: In this scenario first the increment is done and then value is assigned

Below is the image visualization and also here is a nice practical video which demonstrates the same.

Answer 6

The reason ++i can be slightly faster than i++ is that i++ can require a local copy of the value of i before it gets incremented, while ++i never does. In some cases, some compilers will optimize it away if possible... but it's not always possible, and not all compilers do this.

I try not to rely too much on compilers optimizations, so I'd follow Ryan Fox's advice: when I can use both, I use ++i.

Answer 7

They both increment the number. ++i is equivalent to i = i + 1.

i++ and ++i are very similar but not exactly the same. Both increment the number, but ++i increments the number before the current expression is evaluated, whereas i++ increments the number after the expression is evaluated.

Example:

int i = 1;
int x = i++; //x is 1, i is 2
int y = ++i; //y is 3, i is 3

Answer 8

The effective result of using either in a loop is identical. In other words, the loop will do the same exact thing in both instances.

In terms of efficiency, there could be a penalty involved with choosing i++ over ++i. In terms of the language spec, using the post-increment operator should create an extra copy of the value on which the operator is acting. This could be a source of extra operations.

However, you should consider two main problems with the preceding logic.

1. Modern compilers are great. All good compilers are smart enough to realize that it is seeing an integer increment in a for-loop, and it will optimize both methods to the same efficient code. If using post-increment over pre-increment actually causes your program to have a slower running time, then you are using a terrible compiler.

2. In terms of operational time-complexity, the two methods (even if a copy is actually being performed) are equivalent. The number of instructions being performed inside of the loop should dominate the number of operations in the increment operation significantly. Therefore, in any loop of significant size, the penalty of the increment method will be massively overshadowed by the execution of the loop body. In other words, you are much better off worrying about optimizing the code in the loop rather than the increment.

In my opinion, the whole issue simply boils down to a style preference. If you think pre-increment is more readable, then use it. Personally, I prefer the post-incrment, but that is probably because it was what I was taught before I knew anything about optimization.

This is a quintessential example of premature optimization, and issues like this have the potential to distract us from serious issues in design. It is still a good question to ask, however, because there is no uniformity in usage or consensus in "best practice."

Answer 9

The only difference is the order of operations between the increment of the variable and the value the operator returns.

This code and its output explains the the difference:

#include<stdio.h>

int main(int argc, char* argv[])
{
  unsigned int i=0, a;
  printf("i initial value: %d; ", i);
  a = i++;
  printf("value returned by i++: %d, i after: %d\n", a, i);
  i=0;
  printf("i initial value: %d; ", i);
  a = ++i;
  printf(" value returned by ++i: %d, i after: %d\n",a, i);
}

The output is:

i initial value: 0; value returned by i++: 0, i after: 1
i initial value: 0;  value returned by ++i: 1, i after: 1

So basically ++i returns the value after it is incremented, while i++ return the value before it is incremented. At the end, in both cases the i will have its value incremented.

Another example:

#include<stdio.h>

int main ()
  int i=0;
  int a = i++*2;
  printf("i=0, i++*2=%d\n", a);
  i=0;
  a = ++i * 2;
  printf("i=0, ++i*2=%d\n", a);
  i=0;
  a = (++i) * 2;
  printf("i=0, (++i)*2=%d\n", a);
  i=0;
  a = (++i) * 2;
  printf("i=0, (++i)*2=%d\n", a);
  return 0;
}

Output:

i=0, i++*2=0
i=0, ++i*2=2
i=0, (++i)*2=2
i=0, (++i)*2=2

---

Many times there is no difference

Differences are clear when the returned value is assigned to another variable or when the increment is performed in concatenation with other operations where operations precedence is applied (i++*2 is different from ++i*2, but (i++)*2 and (++i)*2 returns the same value) in many cases they are interchangeable. A classical example is the for loop syntax:

for(int i=0; i<10; i++)

has the same effect of

for(int i=0; i<10; ++i)

Rule to remember

To not make any confusion between the two operators I adopted this rule:

Associate the position of the operator ++ with respect to the variable i to the order of the ++ operation with respect to the assignment

Said in other words:

• ++ before i means incrementation must be carried out before assignment;
• ++ after i means incrementation must be carried out after assignment:

Answer 10

++i (Prefix operation): Increments and then assigns the value
(eg): int i = 5, int b = ++i In this case, 6 is assigned to b first and then increments to 7 and so on.

i++ (Postfix operation): Assigns and then increments the value
(eg): int i = 5, int b = i++ In this case, 5 is assigned to b first and then increments to 6 and so on.

Incase of for loop: i++ is mostly used because, normally we use the starting value of i before incrementing in for loop. But depending on your program logic it may vary.

Answer 11

++i: is pre-increment the other is post-increment.

i++: gets the element and then increments it.
++i: increments i and then returns the element.

Example:

int i = 0;
printf("i: %d\n", i);
printf("i++: %d\n", i++);
printf("++i: %d\n", ++i);

Output:

i: 0
i++: 0
++i: 2

Answer 12

i++ and ++i

This little code may help to visualize the difference from a different angle than the already posted answers:

int i = 10, j = 10;
  
printf ("i is %i \n", i);
printf ("i++ is %i \n", i++);
printf ("i is %i \n\n", i);
  
printf ("j is %i \n", j);
printf ("++j is %i \n", ++j);
printf ("j is %i \n", j);

The outcome is:

//Remember that the values are i = 10, and j = 10

i is 10 
i++ is 10     //Assigns (print out), then increments
i is 11 

j is 10 
++j is 11    //Increments, then assigns (print out)
j is 11 

Pay attention to the before and after situations.

for loop

As for which one of them should be used in an incrementation block of a for loop, I think that the best we can do to make a decision is use a good example:

int i, j;

for (i = 0; i <= 3; i++)
    printf (" > iteration #%i", i);

printf ("\n");

for (j = 0; j <= 3; ++j)
    printf (" > iteration #%i", j);

The outcome is:

> iteration #0 > iteration #1 > iteration #2 > iteration #3
> iteration #0 > iteration #1 > iteration #2 > iteration #3 

I don't know about you, but I don't see any difference in its usage, at least in a for loop.

Answer 13

The following C code fragment illustrates the difference between the pre and post increment and decrement operators:

int  i;
int  j;

Increment operators:

i = 1;
j = ++i;    // i is now 2, j is also 2
j = i++;    // i is now 3, j is 2

Answer 14

I assume you understand the difference in semantics now (though honestly I wonder why people ask 'what does operator X mean' questions on stack overflow rather than reading, you know, a book or web tutorial or something.

But anyway, as far as which one to use, ignore questions of performance, which are unlikely important even in C++. This is the principle you should use when deciding which to use:

Say what you mean in code.

If you don't need the value-before-increment in your statement, don't use that form of the operator. It's a minor issue, but unless you are working with a style guide that bans one version in favor of the other altogether (aka a bone-headed style guide), you should use the form that most exactly expresses what you are trying to do.

QED, use the pre-increment version:

for (int i = 0; i != X; ++i) ...

Answer 15

The difference can be understood by this simple C++ code below:

int i, j, k, l;
i = 1; //initialize int i with 1
j = i+1; //add 1 with i and set that as the value of j. i is still 1
k = i++; //k gets the current value of i, after that i is incremented. So here i is 2, but k is 1
l = ++i; // i is incremented first and then returned. So the value of i is 3 and so does l.
cout << i << ' ' << j << ' ' << k << ' '<< l << endl;
return 0;

Answer 16

The Main Difference is

• i++ Post(After Increment) and

• ++i Pre (Before Increment)

  • post if i =1 the loop increments like 1,2,3,4,n
  • pre if i =1 the loop increments like 2,3,4,5,n

Answer 17

Pre-crement means increment on the same line. Post-increment means increment after the line executes.

int j=0;
System.out.println(j); //0
System.out.println(j++); //0. post-increment. It means after this line executes j increments.

int k=0;
System.out.println(k); //0
System.out.println(++k); //1. pre increment. It means it increments first and then the line executes

When it comes with OR, AND operators, it becomes more interesting.

int m=0;
if((m == 0 || m++ == 0) && (m++ == 1)) { //false
/* in OR condition if first line is already true then compiler doesn't check the rest. It is technique of compiler optimization */
System.out.println("post-increment "+m);
}

int n=0;
if((n == 0 || n++ == 0) && (++n == 1)) { //true
System.out.println("pre-increment "+n); //1
}

In Array

System.out.println("In Array");
int[] a = { 55, 11, 15, 20, 25 } ;
int ii, jj, kk = 1, mm;
ii = ++a[1]; // ii = 12. a[1] = a[1] + 1
System.out.println(a[1]); //12

jj = a[1]++; //12
System.out.println(a[1]); //a[1] = 13

mm = a[1];//13
System.out.printf ( "\n%d %d %d\n", ii, jj, mm ) ; //12, 12, 13

for (int val: a) {
     System.out.print(" " +val); //55, 13, 15, 20, 25
}

In C++ post/pre-increment of pointer variable

#include <iostream>
using namespace std;

int main() {

    int x=10;
    int* p = &x;

    std::cout<<"address = "<<p<<"\n"; //prints address of x
    std::cout<<"address = "<<p<<"\n"; //prints (address of x) + sizeof(int)
    std::cout<<"address = "<<&x<<"\n"; //prints address of x

    std::cout<<"address = "<<++&x<<"\n"; //error. reference can't re-assign because it is fixed (immutable)
}

Answer 18

Shortly:

++i and i++ works same if you are not writing them in a function. If you use something like function(i++) or function(++i) you can see the difference.

function(++i) says first increment i by 1, after that put this i into the function with new value.

function(i++) says put first i into the function after that increment i by 1.

int i=4;
printf("%d\n",pow(++i,2));//it prints 25 and i is 5 now
i=4;
printf("%d",pow(i++,2));//it prints 16 i is 5 now

Answer 19

You can think of internal conversion of that as a multiple statements;

• case 1

i++;

you can think it as,

i;
i = i+1;

• case 2

++i;

you can think it as,

i = i+i;
i;

Answer 20

a=i++ means a contains current i value a=++i means a contains incremented i value

Answer 21

Here is the example to understand the difference

int i=10;
printf("%d %d",i++,++i);

output: 10 12/11 11 (depending on the order of evaluation of arguments to the printf function, which varies across compilers and architectures)

Explanation: i++->i is printed, and then increments. (Prints 10, but i will become 11) ++i->i value increments and prints the value. (Prints 12, and the value of i also 12)