51
votes

I cannot launch the simulator successfully. Once I launch the IOS Simulator this error appears:

"Unable to boot the IOS Simulator."

Following the IOS Simulator error, I then get an error from Xcode reading:

Unable to run app in Simulator
An error was encountered while running (Domain = DTiPhoneSimulatorErrorDomain, Code = 2)

Screenshot for error

UPDATE:

This might sound silly but I went to Xcode/preference/Downloads with intentions of seeing a IOS 8.0 Simulator but there was none. Could this be the problem? Am I suppose to have a IOS 8.0 Simulator? If so can someone direct me how to get it? Also, under the "Downloads" tab in Xcode preference I do see IOS 7.0 and 7.1 Simulators and both work fine with Xcode 5.

20
@Bill I tried rebooting several times and no luck. Any other suggestions? Thanks!JakeFromStateFarm
“This might sound silly but I went to Xcode/preference/Downloads with intentions of seeing a IOS 8.0 Simulator but there was none.” Each release of Xcode includes the simulator for the then-current release of iOS. For Xcode 6, that is the iOS 8.0 simulator. It should already be included with your Xcode 6 installation, so it isn't in the Downloads pane (but see Anton Stremovskiy's answer).rob mayoff
This error is most frequently caused by DYLD_INSERT_LIBRARIES being set. See my answer below or any of the multiple dupes you can find by searching for 'DYLD_INSERT_LIBRARIES iOS Simualtor'Jeremy Huddleston Sequoia

20 Answers

60
votes

the trick is, to select the right command line tools! just select it here enter image description here

reboot(!) and everything is fine again :-)

19
votes

Ok It's known problem. Do you see simulators list? If not

Goto Xcode Menu -> Open Developer Tool -> It will open a simulator in your Dock -> click on simulator then go to Simulator Menu: Hardware -> Device -> Manage Devices. Add needed simulators. Always try to run your app with different simulators.someone will work.

15
votes

Restart your Mac. I just had that exact error after installing Xcode 6 beta 7, literally the only thing I did in response was reboot my Mac and now the iOS 8 simulator is working.

This error is common if you update Xcode without restarting afterwards.

9
votes

In my case, i reset ios simulator settings fix it.

iOS Simulator -> Reset Content and Settings ...

8
votes
  1. Open Xcode 6 beta
  2. Goto Window > Devices
  3. Click on the little + sign at the bottom
  4. Add (if missing) all the devices that you want, or delete and recreate if not working.
  5. If anyone of the simulator is not working then you can delete it and then re-create it again in this menu.

enter image description here

3
votes

I saw the same issue when I installed Xcode 6 beta 6, and deleted beta 4 and beta 5. Apparently, deleting the old betas also deleted the iOS Simulator 8 versions! Putting it back from my Trash solved the issue.

Solution: Don't delete old beta software!

Edit: @Flori's solution worked. Was able to delete the old beta software, and after a complete system reboot, it worked again.

3
votes
  • From the xCode 6 pull down menus, Xcode > Open Developer Tool > iOS Simulator (if you get a pop up error just dismiss it)
  • Once in the Simulator go to Hardware > Device > Manage Devices.
  • Delete everything listed under simulator.
  • Reboot your machine.

After that, navigate back to Manage Devices in the simulator and click the plus to add back your simulators. Then the iOS 8 simulators will show up.

3
votes

Just unset DYLD_INSERT_LIBRARIES environment variable in the /etc/launchd.conf or ~/.launchd.conf file. Which you can edit by sudo vi /etc/launchd.conf command. remove the above flag save it by "ZZ" (captial Z) and reboot the system. It works like a charm.

2
votes

Make sure that path in menu XCode>Preference>Locations point to XCode 6.0 (Restart Xcode after changing them). Then go to menu Window>Devices and add simulator devices you want to use.

2
votes

Edit: Turns out I was getting my version of the error because I had a file (the "Empty File" type) named "Frameworks" in several of my projects, and this was causing big issues with the iOS 8 simulators. Renaming the file to be anything else, and then doing a Clean Build Folder fixed it right away.

------Deprecated Original Message Below--------

In case this helps anyone -- I was having a similar error on Xcode 6 GM, and tried everything mentioned in these Answers, but the iOS 8 simulators would never run any of my apps (no problems with iOS 7 running from Xcode 6 though).

What did sort of work was creating a new project (new project apps would run in the iOS 8 simulators, but never any luck with existing apps). Copying over files and project settings is no fun, but at least it let me do testing and see if my apps needed fixing for the iOS 8 public release.

Extended description of problem at https://devforums.apple.com/thread/246751

2
votes

I tried everything mentioned above and nothing worked.

Finally the only way to make it work was unsetting DYLD_INSERT_LIBRARIES=/usr/lib/libimckit.dylib

How I did this:

  1. Open terminal and typing "sudo vi /etc/launchd.conf"
  2. Changing

"setenv DYLD_INSERT_LIBRARIES /usr/lib/libimckit.dylib"

to

"unsetenv DYLD_INSERT_LIBRARIES /usr/lib/libimckit.dylib"

  1. Save changes
  2. Reboot your system

In this post [1] explain what DYLD_INSERT_LIBRARIES is for

[1] https://stackoverflow.com/a/26053165/2091181

2
votes

I got this issue when moving from Beta 6 to Beta 7. Very frustrating. I could reset content and settings on any of the iOS 8 simulators. None of my iOS 8 simulators were working at all, just a black screen. I restarted my machine during the process, but I am not sure if it did anything. Initially I had only iOS 8 Simulators. I had to remove and reinstall Xcode6Beta7. I did not get the Install More Components the first time I installed it, I am not sure if that was the missing part. I installed the iOS 7 Simulators from Settings->Downloads because my iOS8 ones were not working. After I had reinstalled and relaunched the simulator, I then had a list of iOS 6,7,& 8 simulators. None of the iOS 8 Simulators were working. I was able to launch the iOS7 simulator and then using the device menu change to an iOS 8 Simulator. Some still did not work, I had to remove them and re-add them in the devices screen.

  1. Remove XCode6Beta from Applications.
  2. Restart Machine (Just in case, this seems to solve some peoples issue completely)
  3. Install XCode6Beta.
  4. Verify the Install Additional Components ran.
  5. Launch Xcode6Beta.
  6. Preferences->General->Change Command Line Tools to Xcode 6.0.
  7. Restart Xcode.
  8. Preferences->Downloads->Download iOS 7 Simulator (If not already downloaded).
  9. Run App on iOS 7 Simulator (Or launch iOS Simulator and switch to iOS 7 device)
  10. If the iOS 7 Simulator is working, Hardware->Devices->Select an iOS 8 simulator.
  11. Delete and recreate any non working iOS 8 Simulators in Window->Devices from Xcode.
1
votes

I wrestled with this for a bit, with the simulator app reporting that it couldn't find the iOS8 simulator, and suggesting updating in Prefs/Downloads, which didn't work. I tried re-installing Beta 6 twice (without removing all the support files, which would have been next). The initial installation described itself as build 6A280c; a fresh download yielded build 6A280e. No luck.

Eventually, I opened Window -> Devices, and used the "+" button in the lower left to add a new simulator for iPhone 5s, iOS 8, naming it "Fresh 5s". The Schemes popup now displayed three iPhone 5S/iOS 8 options (none with the name I designated, but differentiated by UUIDs); at least one of them worked.

I'm guessing that this feature (collections of arbitrary simulator instances) will be very useful when it's baked. In the meantime, I guess I'll need to manage the list of simulators manually.

1
votes

Do following steps worked for me:

1. Launch the iOS Simulator and go to iOS Simulator --> Reset Content and Settings...

2. Close all the applications and restart your mac 

3. Open Xcode6.0.1 or 6.0 and test the iOS Simulator
0
votes

Had the same problem after moving from Xcode 6 beta 5 to beta 6, but also for the iOS 7.1 simulator. Restarting my machine seemed to do the job. I did not need to update from Xcode 5.1.1 CLT to Xcode 6.0 CLT.

0
votes

I tried all of the solutions above, and was still unable to launch the iOS8 Simulator. The iOS7 Simulators all launched fine.

Looking at the Console, I found that the launch was crashing, and the crash log complained about the dynamic library, libimckit.dylib. You can read about that here: https://discussions.apple.com/thread/5781366?start=0&tstart=0

The quick solution, remove that and its partner library, reboot, and it loads.

0
votes

Is there anything interesting in ~/Library/Logs/CoreSimulator/CoreSimulator.log?

The "Unable to boot the iOS Simulator." error message is almost always because launchd_crashed because DYLD_INSERT_LIBRARIES was set to something not compatible with the iOS Simulator runtime. Do you have any crash logs (eg: launchd_sim crashes) in ~/Library/Logs/DiagnosticReports? If so, check if they show DYLD_INSERT_LIBRARIES being set. If that's the case, your options are to either update to an OS X Yosemite host (which will deal with this issue) or unset DYLD_INSERT_LIBRARIES (likely set in /etc/launchd.conf or ~/.launchd.conf)

0
votes
  1. Force Quit All the apps including xcode and simulator
  2. Restart MAC
0
votes

Checking in the "Locations" Xcode preference, I had two items of the same version, one located in the app translocation area (/var/.../AppTranslocation/...). Also I had previously done a manual command line tools install. To resolve this in the end I had to delete /Applications/Xcode.app and remove the manual command line tools install:

sudo rm -rf /Library/Developer/CommandLineTools

Then installed Xcode anew, and rebooted. Boom! Simulator working again.

0
votes

Reboot your mac os. its working correctly on xcode 11.3.x and mac os 10.14.6.