Relative frequencies / proportions with dplyr

Question

Suppose I want to calculate the proportion of different values within each group. For example, using the mtcars data, how do I calculate the relative frequency of number of gears by am (automatic/manual) in one go with dplyr?

library(dplyr)
data(mtcars)
mtcars <- tbl_df(mtcars)

# count frequency
mtcars %>%
  group_by(am, gear) %>%
  summarise(n = n())

# am gear  n
#  0    3 15 
#  0    4  4 
#  1    4  8  
#  1    5  5 

What I would like to achieve:

am gear  n rel.freq
 0    3 15      0.7894737
 0    4  4      0.2105263
 1    4  8      0.6153846
 1    5  5      0.3846154

Answer 1

Try this:

mtcars %>%
  group_by(am, gear) %>%
  summarise(n = n()) %>%
  mutate(freq = n / sum(n))

#   am gear  n      freq
# 1  0    3 15 0.7894737
# 2  0    4  4 0.2105263
# 3  1    4  8 0.6153846
# 4  1    5  5 0.3846154

From the dplyr vignette:

When you group by multiple variables, each summary peels off one level of the grouping. That makes it easy to progressively roll-up a dataset.

Thus, after the summarise, the last grouping variable specified in group_by, 'gear', is peeled off. In the mutate step, the data is grouped by the remaining grouping variable(s), here 'am'. You may check grouping in each step with groups.

The outcome of the peeling is of course dependent of the order of the grouping variables in the group_by call. You may wish to do a subsequent group_by(am), to make your code more explicit.

For rounding and prettification, please refer to the nice answer by @Tyler Rinker.

Answer 2

You can use count() function, which has however a different behaviour depending on the version of dplyr:

• dplyr 0.7.1: returns an ungrouped table: you need to group again by am

• dplyr < 0.7.1: returns a grouped table, so no need to group again, although you might want to ungroup() for later manipulations

dplyr 0.7.1

mtcars %>%
  count(am, gear) %>%
  group_by(am) %>%
  mutate(freq = n / sum(n))

dplyr < 0.7.1

mtcars %>%
  count(am, gear) %>%
  mutate(freq = n / sum(n))

This results into a grouped table, if you want to use it for further analysis, it might be useful to remove the grouped attribute with ungroup().

Answer 3

@Henrik's is better for usability as this will make the column character and no longer numeric but matches what you asked for...

mtcars %>%
  group_by (am, gear) %>%
  summarise (n=n()) %>%
  mutate(rel.freq = paste0(round(100 * n/sum(n), 0), "%"))

##   am gear  n rel.freq
## 1  0    3 15      79%
## 2  0    4  4      21%
## 3  1    4  8      62%
## 4  1    5  5      38%

EDIT Because Spacedman asked for it :-)

as.rel_freq <- function(x, rel_freq_col = "rel.freq", ...) {
    class(x) <- c("rel_freq", class(x))
    attributes(x)[["rel_freq_col"]] <- rel_freq_col
    x
}

print.rel_freq <- function(x, ...) {
    freq_col <- attributes(x)[["rel_freq_col"]]
    x[[freq_col]] <- paste0(round(100 * x[[freq_col]], 0), "%")   
    class(x) <- class(x)[!class(x)%in% "rel_freq"]
    print(x)
}

mtcars %>%
  group_by (am, gear) %>%
  summarise (n=n()) %>%
  mutate(rel.freq = n/sum(n)) %>%
  as.rel_freq()

## Source: local data frame [4 x 4]
## Groups: am
## 
##   am gear  n rel.freq
## 1  0    3 15      79%
## 2  0    4  4      21%
## 3  1    4  8      62%
## 4  1    5  5      38%

Answer 4

I wrote a small function for this repeating task:

count_pct <- function(df) {
  return(
    df %>%
      tally %>% 
      mutate(n_pct = 100*n/sum(n))
  )
}

I can then use it like:

mtcars %>% 
  group_by(cyl) %>% 
  count_pct

It returns:

# A tibble: 3 x 3
    cyl     n n_pct
  <dbl> <int> <dbl>
1     4    11  34.4
2     6     7  21.9
3     8    14  43.8

Answer 5

Despite the many answers, one more approach which uses prop.table in combination with dplyr or data.table.

library("dplyr")
mtcars %>%
    group_by(am, gear) %>%
    summarise(n = n()) %>%
    mutate(freq = prop.table(n))

library("data.table")
cars_dt <- as.data.table(mtcars)
cars_dt[, .(n = .N), keyby = .(am, gear)][, freq := prop.table(n) , by = "am"]

Answer 6

Here is a general function implementing Henrik's solution on dplyr 0.7.1.

freq_table <- function(x, 
                       group_var, 
                       prop_var) {
  group_var <- enquo(group_var)
  prop_var  <- enquo(prop_var)
  x %>% 
    group_by(!!group_var, !!prop_var) %>% 
    summarise(n = n()) %>% 
    mutate(freq = n /sum(n)) %>% 
    ungroup
}

Answer 7

Here is a base R answer using aggregate and ave :

df1 <- with(mtcars, aggregate(list(n = mpg), list(am = am, gear = gear), length))
df1$prop <- with(df1, n/ave(n, am, FUN = sum))
#Also with prop.table
#df1$prop <- with(df1, ave(n, am, FUN = prop.table))
df1

#  am gear  n      prop
#1  0    3 15 0.7894737
#2  0    4  4 0.2105263
#3  1    4  8 0.6153846
#4  1    5  5 0.3846154 

---

We can also use prop.table but the output displays differently.

prop.table(table(mtcars$am, mtcars$gear), 1)
   
#            3         4         5
#  0 0.7894737 0.2105263 0.0000000
#  1 0.0000000 0.6153846 0.3846154

Answer 8

For the sake of completeness of this popular question, since version 1.0.0 of dplyr, parameter .groups controls the grouping structure of the summarise function after group_by summarise help.

With .groups = "drop_last", summarise drops the last level of grouping. This was the only result obtained before version 1.0.0.

library(dplyr)
library(scales)

original <- mtcars %>%
  group_by (am, gear) %>%
  summarise (n=n()) %>%
  mutate(rel.freq =  scales::percent(n/sum(n), accuracy = 0.1))
#> `summarise()` regrouping output by 'am' (override with `.groups` argument)

original
#> # A tibble: 4 x 4
#> # Groups:   am [2]
#>      am  gear     n rel.freq
#>   <dbl> <dbl> <int> <chr>   
#> 1     0     3    15 78.9%   
#> 2     0     4     4 21.1%   
#> 3     1     4     8 61.5%   
#> 4     1     5     5 38.5%

new_drop_last <- mtcars %>%
  group_by (am, gear) %>%
  summarise (n=n(), .groups = "drop_last") %>%
  mutate(rel.freq =  scales::percent(n/sum(n), accuracy = 0.1))

dplyr::all_equal(original, new_drop_last)
#> [1] TRUE

With .groups = "drop", all levels of grouping are dropped. The result is turned into an independent tibble with no trace of the previous group_by

# .groups = "drop"
new_drop <- mtcars %>%
  group_by (am, gear) %>%
  summarise (n=n(), .groups = "drop") %>%
  mutate(rel.freq =  scales::percent(n/sum(n), accuracy = 0.1))

new_drop
#> # A tibble: 4 x 4
#>      am  gear     n rel.freq
#>   <dbl> <dbl> <int> <chr>   
#> 1     0     3    15 46.9%   
#> 2     0     4     4 12.5%   
#> 3     1     4     8 25.0%   
#> 4     1     5     5 15.6%

If .groups = "keep", same grouping structure as .data (mtcars, in this case). summarise does not peel off any variable used in the group_by.

Finally, with .groups = "rowwise", each row is it's own group. It is equivalent to "keep" in this situation

# .groups = "keep"
new_keep <- mtcars %>%
  group_by (am, gear) %>%
  summarise (n=n(), .groups = "keep") %>%
  mutate(rel.freq =  scales::percent(n/sum(n), accuracy = 0.1))

new_keep
#> # A tibble: 4 x 4
#> # Groups:   am, gear [4]
#>      am  gear     n rel.freq
#>   <dbl> <dbl> <int> <chr>   
#> 1     0     3    15 100.0%  
#> 2     0     4     4 100.0%  
#> 3     1     4     8 100.0%  
#> 4     1     5     5 100.0%

# .groups = "rowwise"
new_rowwise <- mtcars %>%
  group_by (am, gear) %>%
  summarise (n=n(), .groups = "rowwise") %>%
  mutate(rel.freq =  scales::percent(n/sum(n), accuracy = 0.1))

dplyr::all_equal(new_keep, new_rowwise)
#> [1] TRUE

Another point that can be of interest is that sometimes, after applying group_by and summarise, a summary line can help.

# create a subtotal line to help readability
subtotal_am <- mtcars %>%
  group_by (am) %>% 
  summarise (n=n()) %>%
  mutate(gear = NA, rel.freq = 1)
#> `summarise()` ungrouping output (override with `.groups` argument)

mtcars %>% group_by (am, gear) %>%
  summarise (n=n()) %>% 
  mutate(rel.freq = n/sum(n)) %>%
  bind_rows(subtotal_am) %>%
  arrange(am, gear) %>%
  mutate(rel.freq =  scales::percent(rel.freq, accuracy = 0.1))
#> `summarise()` regrouping output by 'am' (override with `.groups` argument)
#> # A tibble: 6 x 4
#> # Groups:   am [2]
#>      am  gear     n rel.freq
#>   <dbl> <dbl> <int> <chr>   
#> 1     0     3    15 78.9%   
#> 2     0     4     4 21.1%   
#> 3     0    NA    19 100.0%  
#> 4     1     4     8 61.5%   
#> 5     1     5     5 38.5%   
#> 6     1    NA    13 100.0%

^{Created on 2020-11-09 by the reprex package (v0.3.0)}

Hope you find this answer useful.

Answer 9

This answer is based upon Matifou's answer.

First I modified it to ensure that I don't get the freq column returned as a scientific notation column by using the scipen option.

Then I multiple the answer by 100 to get a percent rather than decimal to make the freq column easier to read as a percentage.

getOption("scipen") 
options("scipen"=10) 
mtcars %>%
count(am, gear) %>% 
mutate(freq = (n / sum(n)) * 100)

Answer 10

Also, try add_count() (to get around pesky group_by .groups)

`mtcars %>% 
  count(am, gear) %>% 
  add_count(am, wt = n) %>% 
  mutate(pct = n / nn)`