635
votes

How can I convert a 'normal' Git repository to a bare one?

The main difference seems to be:

  • in the normal Git repository, you have a .git folder inside the repository containing all relevant data and all other files making up your working copy

  • in a bare Git repository, there is no working copy and the folder (let's call it repo.git) contains the actual repository data

17
Presumably this is a shorter method: mv repo/.git repo.git; rm -rf repojameshfisher
Yes, true. When I wrote the question, this was just the snippet of my history, that I executed the other minute.Boldewyn
@eegg Use && instead of ; in case mv fails!user1203803

17 Answers

659
votes

In short: replace the contents of repo with the contents of repo/.git, then tell the repository that it is now a bare repository.

To do this, execute the following commands:

cd repo
mv .git ../repo.git # renaming just for clarity
cd ..
rm -fr repo
cd repo.git
git config --bool core.bare true

Note that this is different from doing a git clone --bare to a new location (see below).

256
votes

Your method looks like it would work; the file structure of a bare repository is just what is inside the .git directory. But I don't know if any of the files are actually changed, so if that fails, you can just do

git clone --bare /path/to/repo

You'll probably need to do it in a different directory to avoid a name conflict, and then you can just move it back to where you want. And you may need to change the config file to point to wherever your origin repo is.

121
votes

I think the following link would be helpful

GitFaq: How do I make existing non-bare repository bare?

$ mv repo/.git repo.git
$ git --git-dir=repo.git config core.bare true
$ rm -rf repo
77
votes

Unless you specifically want or need to twiddle bits on the filesystem, it really is dead simple to create a bare version of a non-bare repository (mentioned in several other posts here). It’s part of git’s core functionality:

git clone --bare existing_repo_path bare_repo_path

22
votes

Please also consider to use

git clone --mirror path_to_source_repository path_to_bare_repository

From the documentation:

Set up a mirror of the source repository. This implies --bare. Compared to --bare, --mirror not only maps local branches of the source to local branches of the target, it maps all refs (including remote-tracking branches, notes etc.) and sets up a refspec configuration such that all these refs are overwritten by a git remote update in the target repository.

8
votes

I just wanted to push to a repository on a network path but git would not let me do that unless that repository was marked as bare. All I needed was to change its config:

git config --bool core.bare true

No need to fiddle with the files unless you want to keep it clean.

6
votes

i've read the answers and i have done this:

cd repos
mv .git repos.git
cd repos.git
git config --bool core.bare true # from another answer
cd ../
mv repos.git ../
cd ../
rm -rf repos/ # or delete using a file manager if you like

this will leave the contents of repos/.git as the bare repos.git

4
votes

Here's what I think is safest and simplest. There is nothing here not stated above. I just want to see an answer that shows a safe step-by-step procedure. You start one folder up from the repository (repo) you want to make bare. I've adopted the convention implied above that bare repository folders have a .git extension.

(1) Backup, just in case.
    (a) > mkdir backup
    (b) > cd backup
    (c) > git clone ../repo
(2) Make it bare, then move it
    (a) > cd ../repo
    (b) > git config --bool core.bare true
    (c) > mv .git ../repo.git
(3) Confirm the bare repository works (optional, since we have a backup)
    (a) > cd ..
    (b) > mkdir test
    (c) > cd test
    (d) > git clone ../repo.git
(4) Clean up
    (a) > rm -Rf repo
    (b) (optional) > rm -Rf backup/repo
    (c) (optional) > rm -Rf test/repo
4
votes

Simply read

Pro Git Book: 4.2 Git on the Server - Getting Git on a Server

which boild down to

$ git clone --bare my_project my_project.git
Cloning into bare repository 'my_project.git'...
done.

Then put my_project.git to the server

Which mainly is, what answer #42 tried to point out. Shurely one could reinvent the wheel ;-)

3
votes

Here is a little BASH function you can add to your .bashrc or .profile on a UNIX based system. Once added and the shell is either restarted or the file is reloaded via a call to source ~/.profile or source ~/.bashrc.

function gitToBare() {
  if [ -d ".git" ]; then
    DIR="`pwd`"
    mv .git ..
    rm -fr *
    mv ../.git .
    mv .git/* .
    rmdir .git

    git config --bool core.bare true
    cd ..
    mv "${DIR}" "${DIR}.git"

    printf "[\x1b[32mSUCCESS\x1b[0m] Git repository converted to "
    printf "bare and renamed to\n  ${DIR}.git\n"
    cd "${DIR}.git"
  else
    printf "[\x1b[31mFAILURE\x1b[0m] Cannot find a .git directory\n"
  fi
}

Once called within a directory containing a .git directory, it will make the appropriate changes to convert the repository. If there is no .git directory present when called, a FAILURE message will appear and no file system changes will happen.

1
votes

The methods that say to remove files and muck about with moving the .git directory are not clean and not using the "git" method of doing something that's should be simple. This is the cleanest method I have found to convert a normal repo into a bare repo.

First clone /path/to/normal/repo into a bare repo called repo.git

git clone --bare /path/to/normal/repo

Next remove the origin that points to /path/to/normal/repo

cd repo.git
git remote rm origin

Finally you can remove your original repo. You could rename repo.git to repo at that point, but the standard convention to signify a git repository is something.git, so I'd personally leave it that way.

Once you've done all that, you can clone your new bare repo (which in effect creates a normal repo, and is also how you would convert it from bare to normal)

Of course if you have other upstreams, you'll want to make a note of them, and update your bare repo to include it. But again, it can all be done with the git command. Remember the man pages are your friend.

1
votes

In case you have a repository with few local checkedout branches /refs/heads/* and few remote branch branches remotes/origin/* AND if you want to convert this into a BARE repository with all branches in /refs/heads/*

you can do the following to save the history.

  1. create a bare repository
  2. cd into the local repository which has local checkedout branches and remote branches
  3. git push /path/to/bare/repo +refs/remotes/origin/:refs/heads/
1
votes

Here is the definition of a bare repository from gitglossary:

A bare repository is normally an appropriately named directory with a .git suffix that does not have a locally checked-out copy of any of the files under revision control. That is, all of the Git administrative and control files that would normally be present in the hidden .git sub-directory are directly present in the repository.git directory instead, and no other files are present and checked out. Usually publishers of public repositories make bare repositories available.

I arrived here because I was playing around with a "local repository" and wanted to be able to do whatever I wanted as if it were a remote repository. I was just playing around, trying to learn about git. I'll assume that this is the situation for whoever wants to read this answer.

I would love for an expert opinion or some specific counter-examples, however it seems that (after rummaging through some git source code that I found) simply going to the file .git/config and setting the core attribute bare to true, git will let you do whatever you want to do to the repository remotely. I.e. the following lines should exist in .git/config:

[core]
    ...
    bare = true
...

(This is roughly what the command git config --bool core.bare true will do, which is probably recommended to deal with more complicated situations)

My justification for this claim is that, in the git source code, there seems to be two different ways of testing if a repo is bare or not. One is by checking a global variable is_bare_repository_cfg. This is set during some setup phase of execution, and reflects the value found in the .git/config file. The other is a function is_bare_repository(). Here is the definition of this function:

int is_bare_repository(void)
{
    /* if core.bare is not 'false', let's see if there is a work tree */
    return is_bare_repository_cfg && !get_git_work_tree();
} 

I've not the time nor expertise to say this with absolute confidence, but as far as I could tell if you have the bare attribute set to true in .git/config, this should always return 1. The rest of the function probably is for the following situation:

  1. core.bare is undefined (i.e. neither true nor false)
  2. There is no worktree (i.e. the .git subdirectory is the main directory)

I'll experiment with it when I can later, but this would seem to indicate that setting core.bare = true is equivalent to removeing core.bare from the config file and setting up the directories properly.

At any rate, setting core.bare = true certainly will let you push to it, but I'm not sure if the presence of project files will cause some other operations to go awry. It's interesting and I suppose instructive to push to the repository and see what happened locally (i.e. run git status and make sense of the results).

0
votes

I used the following script to read a text file that has a list of all my SVN repos and convert them to GIT, and later use git clone --bare to convert to a bare git repo

#!/bin/bash
file="list.txt"
while IFS= read -r repo_name
do
 printf '%s\n' "$repo_name"
 sudo git svn clone --shared --preserve-empty-dirs --authors-file=users.txt file:///programs/svn/$repo_name 
 sudo git clone --bare /programs/git/$repo_name $repo_name.git
 sudo chown -R www-data:www-data $repo_name.git
 sudo rm -rf $repo_name
done <"$file"

list.txt has the format

repo1_name
repo2_name

and users.txt has the format

(no author) = Prince Rogers <[email protected]>

www-data is the Apache web server user, permission is needed to push changes over HTTP

-1
votes

First, backup your existing repo:

(a)  mkdir backup

(b)  cd backup

(c)  git clone non_bare_repo

Second, run the following:

git clone --bare -l non_bare_repo new_bare_repo
-4
votes

Oneliner for doing all of the above operations:

for i in `ls -A .`; do if [ $i != ".git" ]; then rm -rf $i; fi; done; mv .git/* .; rm -rf .git; git config --bool core.bare true

(don't blame me if something blows up and you didn't have backups :P)

-9
votes

Wow, it's simply amazing how many people chimed in on this, especially considering it doesn't seem that not a single on stopped to ask why this person is doing what he's doing.

The ONLY difference between a bare and non-bare git repository is that the non-bare version has a working copy. The main reason you would need a bare repo is if you wanted to make it available to a third party, you can't actually work on it directly so at some point you're going to have to clone it at which point you're right back to a regular working copy version.

That being said, to convert to a bare repo all you have to do is make sure you have no commits pending and then just :

rm -R * && mv .git/* . && rm -R .git

There ya go, bare repo.