dfu-util: unable to read DFU status

0
votes

DFU does not seem to work on a development board (Hitex LPC1850 or Keil MCB1800), but the manual states that it should work.

I could not find the same problem on the internet, so I posted my problem here. (I manually compiled dfu-util 0.7, but the lpcXpresso bundled binary gives similar result)

tijs@debian:~/u-boot$ sudo ../dfu-util/src/dfu-util -R -D u-boot-dfu.bin  boot/u-boot/u-boot-dfu.bin  dfu-util 0.7

Copyright 2005-2008 Weston Schmidt, Harald Welte and OpenMoko Inc. Copyright 2010-2012 Tormod Volden and Stefan Schmidt This program is Free Software and has ABSOLUTELY NO WARRANTY Please report bugs to dfu-util@lists.gnumonks.org

Opening DFU capable USB device... 
ID 1fc9:000c Run-time device DFU version 0100 
Claiming USB DFU Runtime Interface... 
Determining device status: state = dfuIDLE, status = 0 
dfu-util: WARNING: Runtime device already in DFU state ?!? 
Claiming USB DFU Interface... 
Setting Alternate Setting #0 ... 
Determining device status: state = dfuIDLE, status = 0 
dfuIDLE, continuing 
DFU mode device DFU version 0100 
Device returned transfer size 2048 
Copying data from PC to DFU device 
Download    [=========================] 100%      
90640 bytes Download done. 
dfu-util: unable to read DFU status

The problem is, that I am not sure if u-boot has been executed. Reset (-R) should do that, but it tells me that it is 'unable to read dfu status'.

Am I missing something here? Does anyone know what might be the problem here?

2
u-bootlpcdfu

2 Answers

2
votes

I already used dfu-util and this message has always been displayed but it doesn't affect the Reset. Once you execute

dfu-util -R -D u-boot-dfu.bin

you should get U-Boot console through serial port (ttyS0... or ttyUSB0 if you are using a Serial to USB dongle...) using minicom or a similar tool.

I ported U-Boot on the Hitex board in SPI Flash and using USB to get the console during a internship, so maybe I can help you further.

0
votes

Thanks for helping.

It seems that the message "dfu-util: unable to read DFU status" is normal.

The problem was that my bootloader was not working because it was for a similar board with more internal SRAM. I just had to port my bootloader first, console is now working.