UIScrollView Scrollable Content Size Ambiguity

Question

Fellow devs, I am having trouble with AutoLayout in Interface Builder (Xcode 5 / iOS 7). It's very basic and important so I think everyone should know how this properly works. If this is a bug in Xcode, it is a critical one!

So, whenever I have a view hierarchy such as this I run into trouble:

>UIViewController
>> UIView
>>>UIScrollView
>>>>UILabel (or any other comparable UIKit Element)

The UIScrollView has solid constraints, e.g., 50 px from every side (no problem). Then I add a Top Space constraint to the UILabel (no problem) (and I can even pin height / width of the label, changes nothing, but should be unneccessary due to the Label's intrinsic size)

The trouble starts when I add a trailing constraint to the UILabel:

E.g., Trailing Space to: Superview Equals: 25

Now two warnings occur - and I don't understand why:

A) Scrollable Content Size Ambiguity (Scroll View has ambiguous scrollable content height/width)

B) Misplaced Views (Label Expected: x= -67 Actual: x= 207

I did this minimal example in a freshly new project which you can download and I attached a screenshot. As you can see, Interface Builder expects the Label to sit outside of the UIScrollView's boundary (the orange dashed rectangle). Updating the Label's frame with the Resolve Issues Tool moves it right there.

Please note: If you replace the UIScrollView with a UIView, the behaviour is as expected (the Label's frame is correct and according to the constraint). So there seems to either be an issue with UIScrollView or I am missing out on something important.

When I run the App without updating the Label's frame as suggested by IB it is positioned just fine, exactly where it's supposed to be and the UIScrollView is scrollable. If I DO update the frame the Label is out of sight and the UIScrollView does not scroll.

Help me Obi-Wan Kenobi! Why the ambiguous layout? Why the misplaced view?

You can download the sample project here and try if you can figure out what's going on: https://github.com/Wirsing84/AutoLayoutProblem

Answer 1

So I just sorted out in this way:

1. Inside the UIScrollView add a UIView (we can call that contentView);

2. In this contentView, set top, bottom, left and right margins to 0 (of course from the scrollView which is the superView); Set also align center horizontally and vertically;

Finished.

Now you can add all your views in that contentView, and the contentSize of the scrollView will be automatically resized according with the contentView.

Update:

Some special case is covered by this video posted by @Sergio in the comments below.

Answer 2

Xcode 11+

The simplest way using autolayout:

1. Add UIScrollView and pin it 0,0,0,0 to superview (or your desired size)
2. Add UIView in ScrollView, pin it 0,0,0,0 to all 4 sides and center it horizontally and vertically.
3. In size inspector, change bottom and align center Y priority to 250. (for horizontal scroll change trailing and align center X)
4. Add all views that you need into this view. Don't forget to set the bottom constraint on the lowest view.
5. Select the UIScrollView, select the size inspector and deselect Content Layout Guides.

Answer 3

Xcode 11+, Swift 5

If you are wondering why all of the answers does not work anymore, make sure that you have pinned the content view (the one you've put inside the scroll view) to Content Layout Guide of the scroll view and NOT to Frame Layout Guide.

Content view edges (leading, trailing, top, bottom) should not be pinned like leading on the image - to Frame Layout Guide

but like this - to Content Layout Guide.

And then the most of the answers will work for you.

The most simple approach now is going like this:

1. Put scroll view in the root view
2. Pin all the sides of scroll view to the superview
3. Take another UIView (will call it content view) and put it inside the scroll view
4. Pin all the sides of the content view to scroll view's Content Layout Guide
5. Pin the content view's width to be equal to scroll view's Frame Layout Guide
6. Fix the content view height in any way you want (I used just constant height constraint in the example below)

Overall your structure in the simplest implementation will look like this

Answer 4

This error took me a while to track down, initially I tried pinning the ScrollView's size but the error message clearly says "content size". I made sure everything I pinned from the top of the ScrollView was also pinned to the bottom. That way the ScrollView can calculate its content height by finding the height of all the objects & constraints. This solved the ambiguous content height, the width is pretty similar... Initially I had most things X centered in the ScrollView, but I had to also pin the objects to the side of the ScrollView. I don't like this because the iPhone6 might have a wider screen but it will remove the 'ambiguous content width' error.

Answer 5

It's answer for my self-answered question UIScrollView + Centered View + Ambigous Scrollable Content Size + many iPhone sizes.

But it fully cover your case too!

So, here is the initial state for simplest case:

1. scrollView with 0 constraints to all edges
2. Button centered Horizontal and Vertical with fixed Width and Height constraints
3. And, of course - annoying warnings Has ambiguous scrollable content width and Has ambiguous scrollable content height.

All, that we have to do is:

• Add 2 additional constraints, for example "0" for trailing and/or bottom space for our view (look at the example on screenshot below).

Important: you have to add trailing and/or bottom constraints. Not "leading and top" - it's not works!

You can check it in my example project, that demonstrating how to fix this issue.

P.S.

According logic - this action should cause "conflicting constraints". But no!

I don't know why it works and how Xcode detects which constraint is more prioritised (because I'm not set priority for these constraints explicity). I'll be thankful if someone explain, why it works in comments below.

Answer 6

You need to create an UIView as a subview of the UIScrollView as described below:

• UIViewController
• UIView 'Main View'
  • UIScrollView
    • UIView 'Container View'
      • [Your content]

The second step is to make the UIScrollView constraints. I did this with the top, bottom, leading and trailing constraints to its superView.

Next I added the constraints for the container of UIScrollView and here is where the problem begins. When you put the same constraints (top, bottom, leading and trailing) the Storyboard gives a warning message:

"Has ambiguous scrollable content width" and "Has ambiguous scrollable content height"

Continue with the same constraints above, and just add the constraints Equal Height and Equal Width to your Container View in relation to the Main View and not to your UIScrollView. In other words the Container View's constraints are tied to the UIScrollView's superview.

After that you will not have warnings in your Storyboard and you can continue adding the constraints for your subviews.

Answer 7

I had the same issue. Untick this checkbox. Since you are setting the content size in code.

Answer 8

I finally figured this out, I hope this is easier to understand.

You can often bypass that warning by adding a base UIView to the scrollview as a "content view", as they mentioned and make it the same size as your scroll view and, on this content view, set these 6 parameters.

As you can see, you need 6 total parameters! Which.. under normal circumstances, you're duplicating 2 constraints but this is the way to avoid this storyboard error.

Answer 9

I know I may be late, but next solution solves this kind of problems without additional code, just using storyboards:

For your content view you need to set constraints for leading/trailing/top/bottom spaces to scrollview and this will not change content view frame, like this:

Of course you need to create additional constraints for content view so scroll view could know content size. For example set fixed height and center x.

Hope this helps.

Answer 10

For me adding a contentView didn't really work as suggested. Moreover, it creates an overhead due to the added view (although I don't consider this a big problem). What worked best for me was just to turn off the ambiguity-checking for my scrollView. Everything is laying out nicely so I think it's okay in simple cases like mine. But keep in mind, that if other constraints for your scrollView break, the Interface-Builder will not warn you any more about it.

Answer 11

Check out this really quick and to the point tutorial on how to get the scroll view working and fully scrollable with auto layout. Now, the only thing that is still leaving me puzzled is why the scroll view content size is always larger then necessary..

http://samwize.com/2014/03/14/how-to-use-uiscrollview-with-autolayout/

Answer 12

Swift 4+ approach:

1) Set UIScrollView top, bottom, left and right margins to 0

2) Inside the UIScrollView add a UIView and set top, bottom, leading, trailing margins to 0 ( equal to UIScrollView margins ).

3) The most important part is to set width and height, where height constraint should have a low priority.

private func setupConstraints() {

    // Constraints for scrollView
    scrollView.topAnchor.constraint(equalTo: view.topAnchor).isActive = true
    scrollView.leadingAnchor.constraint(equalTo: view.leadingAnchor).isActive = true
    scrollView.trailingAnchor.constraint(equalTo: view.trailingAnchor).isActive = true
    scrollView.bottomAnchor.constraint(equalTo: view.bottomAnchor).isActive = true

    // Constraints for containerView
    containerView.topAnchor.constraint(equalTo: scrollView.topAnchor).isActive = true
    containerView.bottomAnchor.constraint(equalTo: scrollView.bottomAnchor).isActive = true
    containerView.leadingAnchor.constraint(equalTo: scrollView.leadingAnchor).isActive = true
    containerView.trailingAnchor.constraint(equalTo: scrollView.trailingAnchor).isActive = true
    containerView.widthAnchor.constraint(equalTo: scrollView.widthAnchor).isActive = true

    let heightConstraint = containerView.heightAnchor.constraint(equalTo: scrollView.heightAnchor)
    heightConstraint.priority = UILayoutPriority(rawValue: 250)
    heightConstraint.isActive = true
}

Answer 13

See below: content view in scrollview vertical and horizontal centralized. you got ambiguity error, always make sure two added into scrollview from your content view is 1).button space to container.2)trailing space to constraint that is highlighted in screenshot,

these constraint means in scroll is how much you can scroll after your content view height or width.

it may help you.

Answer 14

I solved this kind of problem for my view by using "Resolve auto layout issues" > "Add missing constraints" for Selected View

The following two constraints solve my problem:

trailing = Stack View.trailing - 10
bottom = Stack View.bottom + 76

in which: trailing, bottom are the trailing, bottom of UIScrollView

Answer 15

Using contentView (UView) as container inside UIScrollView, stick to edges (top, bottom, trailing, leading) of superview (UIScrollView) and contentView should have equalwidth and equalheight to superview. Those are constraints. And call of method:

-(void)viewDidLayoutSubviews
{
    [super viewDidLayoutSubviews];
    self.scrollView.contentSize = self.contentView.frame.size;
}

Solved issues for me.

Answer 16

In my case I received the issue of incorrect content size and content Size Ambiguity in iPad but was working in case of iPhone. I have done the following changes in storyboard to resolve the issue.

1. Add scrollview in UIView and add constraints leading, top, trailing and bottom to 0,0,0,0.
2. Set height of scroll view as per the requirements for eg. 100.
3. Add UIView to scroll view and add constraints leading, top, trailing and bottom to 0,0,0,0 and align centre(X) and center(Y) constraints.
4. Deselect “Content Layout Guides” in size inspector of scroll view.

Answer 17

@Matteo Gobbi's answer is perfect, but in my case, the scrollview can't scroll, i remove "align center Y" and add "height >=1", the scrollview will became scrollable

Answer 18

People who are struggling with uiscrollview not scrolling just set your content view's bottom constraint with your last view's bottom layout (which is inside of your content view). Do not forget to remove center Y constraint.

Rest all the constraints are same as defined above. Scrollview only concerned about getting maximum height from its content view, and we are setting it as last view's bottom constraint, which means scrollview automatically will change its content offset.

In my case last view was UILable with no of lines property = 0(which automatically adjust its height depending upon its content) so it dynamically increase uilable's height and eventually our scrollable area increases because of uilable's bottom layout is aligned with our content view's bottom, which forces scrollview to increase it's content offset.

Answer 19

I made a video on youTube
Scroll StackViews using only Storyboard in Xcode

I think 2 kind of scenarios can appear here.

The view inside the scrollView -

1. does not have any intrinsic content Size (e.g UIView)
2. does have its own intrinsic content Size (e.g UIStackView)

For a vertically scrollable view in both cases you need to add these constraints:

1. 4 constraints from top, left, bottom and right.

2. Equal width to scrollview (to stop scrolling horizontally)

You don't need any other constraints for views which have his own intrinsic content height.

For views which do not have any intrinsic content height, you need to add a height constraint. The view will scroll only if the height constraint is more than the height of the scrollView.

Answer 20

import UIKit

class ViewController: UIViewController {

    //
    let scrollView: UIScrollView = {
        
        let sv = UIScrollView()
        sv.translatesAutoresizingMaskIntoConstraints = false
        return sv
    }()
    
    let lipsumLbl: UILabel = { // you can use here any of your subview
        
        let lbl = UILabel()
        lbl.translatesAutoresizingMaskIntoConstraints = false
        lbl.text = """
        Lorem ipsum dolor sit amet, consectetur adipiscing elit. Fusce eleifend nisi sit amet mi aliquet, ut efficitur risus pellentesque. Phasellus nulla justo, scelerisque ut libero id, aliquet ullamcorper lectus. Integer id iaculis nibh. Duis feugiat mi vitae magna tincidunt, vitae consequat dui tempor. Donec blandit urna nec urna volutpat, sit amet sagittis massa fringilla. Pellentesque luctus erat nec dui luctus, sed maximus urna fermentum. Nullam purus nibh, cursus vel ex nec, pulvinar lobortis leo. Proin ac libero rhoncus, bibendum lorem sed, congue sapien. Donec commodo, est non mollis malesuada, nisi massa tempus ipsum, a varius quam lorem vitae nunc.
        
        Cras scelerisque nisi dolor, in gravida ex ornare a. Interdum et malesuada fames ac ante ipsum primis in faucibus. Maecenas vitae nisl id erat sollicitudin accumsan sit amet viverra sapien. Etiam scelerisque vulputate ante. Donec magna nibh, pharetra sed pretium ac, feugiat sit amet mi. Vestibulum in ipsum vitae dui vehicula pulvinar eget ut lectus. Fusce sagittis a elit ac elementum. Fusce iaculis nunc odio, at fermentum dolor varius et. Suspendisse consectetur congue massa non gravida. Sed id elit vitae nulla aliquam euismod. Pellentesque accumsan risus dolor, eu cursus nibh semper id.
        
        Vestibulum vel tortor tellus. Suspendisse potenti. Pellentesque id sapien eu augue placerat dictum. Fusce tempus ligula at diam lacinia congue in ut metus. Maecenas volutpat tellus in tellus maximus imperdiet. Integer dignissim condimentum lorem, id luctus nisi maximus at. Nulla pretium, est sit amet mollis eleifend, tellus nulla viverra dolor, ac feugiat massa risus a lectus. Pellentesque ut pulvinar urna, blandit gravida ipsum. Nullam volutpat arcu nec fringilla auctor. Integer egestas enim commodo, faucibus neque ac, rutrum magna. Vivamus tincidunt rutrum auctor. Cras at rutrum felis. Fusce elementum lorem ut pharetra venenatis.
        """
        lbl.textColor = .darkGray
        lbl.font = UIFont.systemFont(ofSize: 16)
        lbl.numberOfLines = 0
        return lbl
    }()
    
    //======================================================================//
    //
    // MARK:- viewDidLoad
    //
    override func viewDidLoad() {
        super.viewDidLoad()
        
        setupViews()
        setupAutoLayout()
    }
    
    func setupViews() {
        
        title = "ScrollView Demo"
        view.backgroundColor = .white
        view.addSubview(scrollView)
        scrollView.addSubview(lipsumLbl)
    }
    
    func setupAutoLayout() {
        
        scrollView.leftAnchor.constraint(equalTo: view.leftAnchor).isActive = true
        scrollView.rightAnchor.constraint(equalTo: view.rightAnchor).isActive = true
        scrollView.topAnchor.constraint(equalTo: view.topAnchor).isActive = true
        scrollView.bottomAnchor.constraint(equalTo: view.bottomAnchor).isActive = true
        
        lipsumLbl.topAnchor.constraint(equalTo: scrollView.topAnchor).isActive = true
        lipsumLbl.leftAnchor.constraint(equalTo: view.leftAnchor).isActive = true
        lipsumLbl.rightAnchor.constraint(equalTo: view.rightAnchor).isActive = true
        lipsumLbl.bottomAnchor.constraint(equalTo: scrollView.bottomAnchor).isActive = true
    }
}

Output:

Answer 21

Vertical Scrolling

1. Add a UIScrollView with constraints 0,0,0,0 to superview.
2. Add a UIView in ScrollView, with constraints 0,0,0,0 to superview.
3. Add same width constraint for UIView to UIScrollView.
4. Add Height to UIView.
5. Add elements with constraints to the UIView.
6. For the element closest to the bottom, make sure it has a constraint to the bottom of UIView.

Answer 22

If you still have problems with UIScrollView, just turn off Content Layout Guides (Select your ScrollView in xcode Interface Builder -> choose Size inspector in right panel -> deselect 'Content Layout Guides') Or try these steps: xcode 11 scroll view layouts - it can be useful for new style of layout. Works fine at macOS 10.15.2, Xcode 11.3.1, for 05.02.2020

see screenshot

Answer 23

For any view, the frame and its content's sizes are the same ie if you have some content (e.g. image) with the size of 200 * 800 then its frame is also 200 * 800.

This is NOT true for scrollview's contents. The content is usually bigger than the frame size of the scrollView. If content is same in width, then you only scroll vertically. If it's same height then you only scroll horizontally. Hence it's the only view that needs 6 constraints not 4. For any other view having more than 4 required constraints will cause a conflict.

---

To setup your scroll view, its contents and position of scrolling, you basically need to answer three questions:

1. How big is my frame? ie at any given moment how big should the scrollview be? e.g. I only want to use half of the screen's height so

scrollview.frame = (x: 0, y:0, width: UIScreen.main.bounds.width, height: UIScreen.main.bounds.height / 2)

2. How much scrolling space do I need? ie How big is the content? e.g. the frame can be just 500 points of width, but then you can set an image with 7000 points, which would take quite some time to scroll horizontally. Or let it be exactly 500 points of width which then means no horizontal scrolling can happen.

3. How much have you scrolled at the moment? Say your content's (or image) width was 7000 and the frame size is just 500. To get to the end of the image, you'd need to scroll 6500 points to the right. The 3rd part really doesn't affect the constraints. You can ignore that for now. Understanding it just helps how a scrollView works.

Solution

Basically if you leave out the 2 extra constraints (about the content size) then the layout engine will complain due to the ambiguity. It won't know what area of the content is hidden (not visible in the scrollView) and what area of the content is not (visible in scrollView) hidden.

So make sure you add size constraints for the content as well

But some times I don't add size constraints to my views and it just works. Why is that?

If all the contents you've added into the scrollview are constrained to the edges of the scrollview, then as the content grow the scrollview will add space to accommodate. It's just that you might be using UIViews where its intrinsicContentSize is 0 so the scrollView will still complain about ambiguity of its content. However if you've used a UILabel and it has a non-empty text, then its intrinsicContentSize is set (based on Font size and text length and line breaks, etc) so the scrollView won't complain about its ambiguity.

Answer 24

What I did is create a separate content view as shown here.

The content view is freeform and can has all subviews added to it with their own constraints in relation to the contentView.

The UIScrollView is added to the main view controller.

Programatically I add the contentView which is linked via IBOutlet to class and set the contentView of UIScrollView.

Answer 25

I was getting the same error.. i have done following

1. View(Superview)
2. ScrollView 0,0,600,600
3. UIView inside ScrollView : 0,0,600,600
4. UIView contains image view , label

Now add leading/trailing/top/bottom for scrollView(2) then UIView(3).

Select View(1) and View(3) set equally height and weight.. its solved my issue.

I have done the video that will help :

https://www.youtube.com/watch?v=s-CPN3xZS1A

Answer 26

[tested in XCode 7.2 and for iOS 9.2]

What suppressed the Storyboard errors and warnings for me was setting the intrinsic size of the scroll view and the content view (in my case, a stackview) to Placeholder. This setting is found in the Size inspector in Storyboard. And it says - Setting a design time intrinsic content size only affects a view while editing in Interface Builder. The view will not have this intrinsic content size at runtime.

So, I guess we aren't going wrong by setting this.

Note: In storyboard, I have pinned all the edges of scrollview to the superview and all the edges of stackview to the scrollview. In my code, I have set the translatesAutoresizingMaskIntoConstraints as false for both the scrollview and the stackview. And I have not mentioned a content size. When the stackview grows dynamically, the constraints set in storyboard ensure that the stack is scrollable.

The storyboard warning was driving me mad and I didn't want to centre things horizontally or vertically just to suppress the warning.

Answer 27

If anyone is getting a behavior where you notice the scroll bar on the right scrolls but the content doesn't move, this fact probably worth considering:

You can also use constraints between the scroll view’s content and objects outside the scroll view to provide a fixed position for the scroll view’s content, making that content appear to float over the scroll view.

That's from Apple's documentation. For example , if you accidentally pinned your top Label/Button/Img/View to the view outside the scroll area (Maybe a header or something just above the scrollView?) instead of the contentView, you'd freeze your whole contentView in place.

Answer 28

As mentioned in previous answers, you should add a custom view inside the scroll view:

Add all your subviews to the content view. At some point you will see a scroll content view has ambiguous content size warning, you should select the content view and click the "Resolve auto layout issues" button (at the bottom right corner of the IB layout), and select the "Add missing constraints" option.

From now on when you run the project, the scroll view will automatically update it's content size, no additional code needed.

Answer 29

You just have to make sure that there is a way to make a continuous line of constraints from the top to the bottom of the scrollview. [-X-X-X]

In my case - a horizontally scrolling scroll view - I also needed to add width and height constraints for each child of the scroll view, although Apple's technical note doesn't tell you this.

Answer 30

Set the ViewController's (the one holding the UIScrollView) size to Freeform in the size inspector in Interface Builder and all should work.

Freeform setting in Size inspector in Interface Builder for the containing UIViewcontroller