400 vs 422 response to POST of data

Question

I'm trying to figure out what the correct status code to return on different scenarios with a "REST-like" API that I'm working on. Let's say I have an end point that allows POST'ing purchases in JSON format. It looks like this:

{
    "account_number": 45645511,
    "upc": "00490000486",
    "price": 1.00,
    "tax": 0.08
}

What should I return if the client sends me "sales_tax" (instead of the expected "tax"). Currently, I'm returning a 400. But, I've started questioning myself on this. Should I really be returning a 422? I mean, it's JSON (which is supported) and it's valid JSON, it's just doesn't contain all of the required fields.

Answer 1

400 Bad Request would now seem to be the best HTTP/1.1 status code for your use case.

At the time of your question (and my original answer), RFC 7231 was not a thing; at which point I objected to 400 Bad Request because RFC 2616 said (with emphasis mine):

The request could not be understood by the server due to malformed syntax.

and the request you describe is syntactically valid JSON encased in syntactically valid HTTP, and thus the server has no issues with the syntax of the request.

However as pointed out by Lee Saferite in the comments, RFC 7231, which obsoletes RFC 2616, does not include that restriction:

The 400 (Bad Request) status code indicates that the server cannot or will not process the request due to something that is perceived to be a client error (e.g., malformed request syntax, invalid request message framing, or deceptive request routing).

---

However, prior to that re-wording (or if you want to quibble about RFC 7231 only being a proposed standard right now), 422 Unprocessable Entity does not seem an incorrect HTTP status code for your use case, because as the introduction to RFC 4918 says:

While the status codes provided by HTTP/1.1 are sufficient to describe most error conditions encountered by WebDAV methods, there are some errors that do not fall neatly into the existing categories. This specification defines extra status codes developed for WebDAV methods (Section 11)

And the description of 422 says:

The 422 (Unprocessable Entity) status code means the server understands the content type of the request entity (hence a 415(Unsupported Media Type) status code is inappropriate), and the syntax of the request entity is correct (thus a 400 (Bad Request) status code is inappropriate) but was unable to process the contained instructions.

(Note the reference to syntax; I suspect 7231 partly obsoletes 4918 too)

This sounds exactly like your situation, but just in case there was any doubt, it goes on to say:

For example, this error condition may occur if an XML request body contains well-formed (i.e., syntactically correct), but semantically erroneous, XML instructions.

(Replace "XML" with "JSON" and I think we can agree that's your situation)

Now, some will object that RFC 4918 is about "HTTP Extensions for Web Distributed Authoring and Versioning (WebDAV)" and that you (presumably) are doing nothing involving WebDAV so shouldn't use things from it.

Given the choice between using an error code in the original standard that explicitly doesn't cover the situation, and one from an extension that describes the situation exactly, I would choose the latter.

Furthermore, RFC 4918 Section 21.4 refers to the IANA Hypertext Transfer Protocol (HTTP) Status Code Registry, where 422 can be found.

I propose that it is totally reasonable for an HTTP client or server to use any status code from that registry, so long as they do so correctly.

---

But as of HTTP/1.1, RFC 7231 has traction, so just use 400 Bad Request!

Answer 2

Case study: GitHub API

https://developer.github.com/v3/#client-errors

Maybe copying from well known APIs is a wise idea:

There are three possible types of client errors on API calls that receive request bodies:

Sending invalid JSON will result in a 400 Bad Request response.

HTTP/1.1 400 Bad Request
Content-Length: 35

{"message":"Problems parsing JSON"}

Sending the wrong type of JSON values will result in a 400 Bad Request response.

HTTP/1.1 400 Bad Request
Content-Length: 40

{"message":"Body should be a JSON object"}

Sending invalid fields will result in a 422 Unprocessable Entity response.

HTTP/1.1 422 Unprocessable Entity
Content-Length: 149

{
  "message": "Validation Failed",
  "errors": [
    {
      "resource": "Issue",
      "field": "title",
      "code": "missing_field"
    }
  ]
}

Answer 3

400 Bad Request is proper HTTP status code for your use case. The code is defined by HTTP/0.9-1.1 RFC.

The request could not be understood by the server due to malformed syntax. The client SHOULD NOT repeat the request without modifications.

http://tools.ietf.org/html/rfc2616#section-10.4.1

422 Unprocessable Entity is defined by RFC 4918 - WebDav. Note that there is slight difference in comparison to 400, see quoted text below.

This error condition may occur if an XML request body contains well-formed (i.e., syntactically correct), but semantically erroneous, XML instructions.

To keep uniform interface you should use 422 only in a case of XML responses and you should also support all status codes defined by Webdav extension, not just 422.

http://tools.ietf.org/html/rfc4918#page-78

See also Mark Nottingham's post on status codes:

it’s a mistake to try to map each part of your application “deeply” into HTTP status codes; in most cases the level of granularity you want to be aiming for is much coarser. When in doubt, it’s OK to use the generic status codes 200 OK, 400 Bad Request and 500 Internal Service Error when there isn’t a better fit.

How to Think About HTTP Status Codes

Answer 4

To reflect the status as of 2015:

Behaviorally both 400 and 422 response codes will be treated the same by clients and intermediaries, so it actually doesn't make a concrete difference which you use.

However I would expect to see 400 currently used more widely, and furthermore the clarifications that the HTTPbis spec provides make it the more appropriate of the two status codes:

• The HTTPbis spec clarifies the intent of 400 to not be solely for syntax errors. The broader phrase "indicates that the server cannot or will not process the request due to something which is perceived to be a client error" is now used.
• 422 is specifically a WebDAV extension, and is not referenced in RFC 2616 or in the newer HTTPbis specification.

For context, HTTPbis is a revision of the HTTP/1.1 spec that attempts to clarify areas that were unclear or inconsistent. Once it has reached approved status it will supersede RFC2616.

Answer 5

There is no correct answer, since it depends on what the definition of "syntax" is for your request. The most important thing is that you:

1. Use the response code(s) consistently
2. Include as much additional information in the response body as you can to help the developer(s) using your API figure out what's going on.=

Before everyone jumps all over me for saying that there is no right or wrong answer here, let me explain a bit about how I came to the conclusion.

In this specific example, the OP's question is about a JSON request that contains a different key than expected. Now, the key name received is very similar, from a natural language standpoint, to the expected key, but it is, strictly, different, and hence not (usually) recognized by a machine as being equivalent.

As I said above, the deciding factor is what is meant by syntax. If the request was sent with a Content Type of application/json, then yes, the request is syntactically valid because it's valid JSON syntax, but not semantically valid, since it doesn't match what's expected. (assuming a strict definition of what makes the request in question semantically valid or not).

If, on the other hand, the request was sent with a more specific custom Content Type like application/vnd.mycorp.mydatatype+json that, perhaps, specifies exactly what fields are expected, then I would say that the request could easily be syntactically invalid, hence the 400 response.

In the case in question, since the key was wrong, not the value, there was a syntax error if there was a specification for what valid keys are. If there was no specification for valid keys, or the error was with a value, then it would be a semantic error.

Answer 6

422 Unprocessable Entity Explained Updated: March 6, 2017

What Is 422 Unprocessable Entity?

A 422 status code occurs when a request is well-formed, however, due to semantic errors it is unable to be processed. This HTTP status was introduced in RFC 4918 and is more specifically geared toward HTTP extensions for Web Distributed Authoring and Versioning (WebDAV).

There is some controversy out there on whether or not developers should return a 400 vs 422 error to clients (more on the differences between both statuses below). However, in most cases, it is agreed upon that the 422 status should only be returned if you support WebDAV capabilities.

A word-for-word definition of the 422 status code taken from section 11.2 in RFC 4918 can be read below.

The 422 (Unprocessable Entity) status code means the server understands the content type of the request entity (hence a 415(Unsupported Media Type) status code is inappropriate), and the syntax of the request entity is correct (thus a 400 (Bad Request) status code is inappropriate) but was unable to process the contained instructions.

The definition goes on to say:

For example, this error condition may occur if an XML request body contains well-formed (i.e., syntactically correct), but semantically erroneous, XML instructions.

400 vs 422 Status Codes

Bad request errors make use of the 400 status code and should be returned to the client if the request syntax is malformed, contains invalid request message framing, or has deceptive request routing. This status code may seem pretty similar to the 422 unprocessable entity status, however, one small piece of information that distinguishes them is the fact that the syntax of a request entity for a 422 error is correct whereas the syntax of a request that generates a 400 error is incorrect.

The use of the 422 status should be reserved only for very particular use-cases. In most other cases where a client error has occurred due to malformed syntax, the 400 Bad Request status should be used.

https://www.keycdn.com/support/422-unprocessable-entity/

Answer 7

Your case: HTTP 400 is the right status code for your case from REST perspective as its syntactically incorrect to send sales_tax instead of tax, though its a valid JSON. This is normally enforced by most of the server side frameworks when mapping the JSON to objects. However, there are some REST implementations that ignore new key in JSON object. In that case, a custom content-type specification to accept only valid fields can be enforced by server-side.

Ideal Scenario for 422:

In an ideal world, 422 is preferred and generally acceptable to send as response if the server understands the content type of the request entity and the syntax of the request entity is correct but was unable to process the data because its semantically erroneous.

Situations of 400 over 422:

Remember, the response code 422 is an extended HTTP (WebDAV) status code. There are still some HTTP clients / front-end libraries that aren't prepared to handle 422. For them, its as simple as "HTTP 422 is wrong, because it's not HTTP". From the service perspective, 400 isn't quite specific.

In enterprise architecture, the services are deployed mostly on service layers like SOA, IDM, etc. They typically serve multiple clients ranging from a very old native client to a latest HTTP clients. If one of the clients doesn't handle HTTP 422, the options are that asking the client to upgrade or change your response code to HTTP 400 for everyone. In my experience, this is very rare these days but still a possibility. So, a careful study of your architecture is always required before deciding on the HTTP response codes.

To handle situation like these, the service layers normally use versioning or setup configuration flag for strict HTTP conformance clients to send 400, and send 422 for the rest of them. That way they provide backwards compatibility support for existing consumers but at the same time provide the ability for the new clients to consume HTTP 422.

---

The latest update to RFC7321 says:

The 400 (Bad Request) status code indicates that the server cannot or
   will not process the request due to something that is perceived to be
   a client error (e.g., malformed request syntax, invalid request
   message framing, or deceptive request routing).

This confirms that servers can send HTTP 400 for invalid request. 400 doesn't refer only to syntax error anymore, however, 422 is still a genuine response provided the clients can handle it.

Answer 8

Firstly this is a very good question.

400 Bad Request - When a critical piece of information is missing from the request

e.g. The authorization header or content type header. Which is absolutely required by the server to understand the request. This can differ from server to server.

422 Unprocessable Entity - When the request body can't be parsed.

This is less severe than 400. The request has reached the server. The server has acknowledged the request has got the basic structure right. But the information in the request body can't be parsed or understood.

e.g. Content-Type: application/xml when request body is JSON.

Here's an article listing status codes and its use in REST APIs. https://metamug.com/article/status-codes-for-rest-api.php

Answer 9

You should actually return "200 OK" and in the response body include a message about what happened with the posted data. Then it's up to your application to understand the message.

The thing is, HTTP status codes are exactly that - HTTP status codes. And those are meant to have meaning only at the transportation layer, not at the application layer. The application layer should really never even know that HTTP is being used. If you switched your transportation layer from HTTP to Homing Pigeons, it should not affect your application layer in any way.

Let me give you a non-virtual example. Let's say you fall in love with a girl and she loves you back but her family moves to a completely different country. She gives you her new snail-mail address. Naturally, you decide to send her a love letter. So you write your letter, put it into an envelope, write her address on the envelope, put a stamp on it and send it. Now let's consider these scenarios

1. You forgot to write a street name. You will receive an unopened letter back with a message written on it saying that the address is malformed. You screwed up the request and the receiving post office is unable to handle it. That's the equivalent of receiving "400 Bad Request".
2. So you fix the address and send the letter again. But due to some bad luck you totaly misspelled the name of the street. You will get the letter back again with a message saying, that the address doesn't exist. That's the equivalent of receiving "404 Not Found".
3. You fix the address again and this time you manage to write the address correctly. Your girl receives the letter and writes you back. It's the equivalent of receiving "200 OK". However, this does not mean that you will like what she wrote in her letter. It simply means that she received your message and has a response for you. Until you open the envelope and read her letter you cannot know whether she misses you dearly or wants to break up with you.

In short: Returning "200 OK" doesn't mean that the server app has good news for you. It only means that it has some news.

PS: The 422 status code has a meaning only in the context of WebDAV. If you're not working with WebDAV, then 422 has exactly the same standard meaning as any other non-standard code = which is none.