12
votes

I know this question has been asked many times before. However, all solutions I have found after over an hour of googling are essentially the same thing. Everyone says that in order to resize a window in XNA you simply add the following lines of code(or some slight variation of these lines of code) to your Initiate() method in the Game1 class:

    //A lot of people say that the ApplyChanges() call is not necessary,
    //and equally as many say that it is.
    graphics.IsFullScreen = false;
    graphics.PreferredBackBufferWidth = 800;
    graphics.PreferredBackBufferHeight = 600;
    graphics.ApplyChanges();

This does not work for me. The code compiles, and runs, but absolutely nothing changes. I've been scouring the documentation for the GraphicsDevice and GraphicsDeviceManager classes, but I have been unable to find any information indicating that I need to do anything other than the above.

I am also fairly sure my graphics card is sufficient(ATI HD 5870), although it appears that the wiki entry on XNA graphics card compatibility has not been updated for a while.

I'm running on Windows 7, with the above graphics card, Visual C# 2010 Express, and the latest version of XNA.

So I'm just hoping that someone can help me find where I am messing up. I will post my entire Game1 class(I renamed it MainApp) below. If anyone would like to see any of the other classes that are called on, ask and I'll post them.

public class MainApp : Microsoft.Xna.Framework.Game
{
    GraphicsDeviceManager graphics;
    SpriteBatch spriteBatch;

    Player player;

    public MainApp()
    {
        graphics = new GraphicsDeviceManager(this);
        Content.RootDirectory = "Content";
    }

    protected override void Initialize()
    {
        player = new Player();

        //This does not do ANYTHING
        graphics.IsFullScreen = false;
        graphics.PreferredBackBufferWidth = 800;
        graphics.PreferredBackBufferHeight = 600;
        graphics.ApplyChanges();

        base.Initialize();
    }

    protected override void LoadContent()
    {
        spriteBatch = new SpriteBatch(GraphicsDevice);

        Vector2 playerPosition = new Vector2(GraphicsDevice.Viewport.TitleSafeArea.X,
                                             GraphicsDevice.Viewport.TitleSafeArea.Y
                                             + 2*(graphics.GraphicsDevice.Viewport.TitleSafeArea.Height / 3));
        player.Initialize(Content.Load<Texture2D>("basePlayerTexture"),
                          playerPosition);
    }

    protected override void UnloadContent()
    {
    }

    protected override void Update(GameTime gameTime)
    {
        if (GamePad.GetState(PlayerIndex.One).Buttons.Back == ButtonState.Pressed)
            this.Exit();
       base.Update(gameTime);
    }

    protected override void Draw(GameTime gameTime)
    {
        GraphicsDevice.Clear(Color.CornflowerBlue);
        spriteBatch.Begin();

        player.Draw(spriteBatch);

        spriteBatch.End();

        base.Draw(gameTime);
    }
}

P.S. This is my second day with C#, so if this is due to a really stupid error I apologize for wasting your time.

2
Have you tried any resolutions above 800x600? I've done this before in XNA and gotten it to work no problem, just changing to 1024x768 or even 1920x1080 and other resolutions. Also I believe graphics.IsFullScreen is false by default.Brandon Buck
Have you tried making an new xna project, and then just add the GraphicsManager and try it? Or is it only happening with this prodject?Cyral

2 Answers

40
votes

It is frustrating that (as you say) "A lot of people say that the ApplyChanges() call is not necessary, and equally as many say that it is" -- the fact of the matter is that it depends on what you are doing and where you are doing it!

(How do I know all this? I've implemented it. See also: this answer.)


When you are setting the initial resolution when your game starts up:

Do this in your constructor (obviously if you rename Game1, do it in your renamed constructor!)

public class Game1 : Microsoft.Xna.Framework.Game
{
    GraphicsDeviceManager graphics;

    public Game1()
    {
        graphics = new GraphicsDeviceManager(this);
        graphics.PreferredBackBufferHeight = 600;
        graphics.PreferredBackBufferWidth = 800;
    }

    // ...
}

And do not touch it during Initialize()! And do not call ApplyChanges().

When Game.Run() gets called (the default template project calls it in Program.cs), it will call GraphicsDeviceManager.CreateDevice to set up the initial display before Initialize() is called! This is why you must create the GraphicsDeviceManager and set your desired settings in the constructor of your game class (which is called before Game.Run()).

If you try to set the resolution in Initialize, you cause the graphics device to be set up twice. Bad.

(To be honest I'm surprised that this causes such confusion. This is the code that is provided in the default project template!)


When you are modifying the resolution while the game is running:

If you present a "resolution selection" menu somewhere in your game, and you want to respond to a user (for example) clicking an option in that menu - then (and only then) should you use ApplyChanges. You should only call it from within Update. For example:

public class Game1 : Microsoft.Xna.Framework.Game
{
    protected override void Update(GameTime gameTime)
    {
        if(userClickedTheResolutionChangeButton)
        {
            graphics.IsFullScreen = userRequestedFullScreen;
            graphics.PreferredBackBufferHeight = userRequestedHeight;
            graphics.PreferredBackBufferWidth = userRequestedWidth;
            graphics.ApplyChanges();
        }

        // ...
    }

    // ...
}

Finally, note that ToggleFullScreen() is the same as doing:

graphics.IsFullScreen = !graphics.IsFullScreen;
graphics.ApplyChanges();
1
votes

The GraphicsDevice.Viewport width and height by default on my computer is 800x480, try setting a size above that that will be noticeable - like 1024x768.

graphics.PreferredBackBufferHeight = 768;
graphics.PreferredBackBufferWidth = 1024;
graphics.ApplyChanges();

The above code in Initialize was sufficient to expand the window for me.