When I want to find the last used cell value, I use:
Dim LastRow As Long
LastRow = Range("E4:E48").End(xlDown).Row
Debug.Print LastRow
I'm getting the wrong output when I put a single element into a cell. But when I put more than one value into the cell, the output is correct. What's the reason behind this?
NOTE: I intend to make this a "one stop post" where you can use the Correct way to find the last row. This will also cover the best practices to follow when finding the last row. And hence I will keep on updating it whenever I come across a new scenario/information.
Some of the most common ways of finding last row which are highly unreliable and hence should never be used.
UsedRange should NEVER be used to find the last cell which has data. It is highly unreliable. Try this experiment.
Type something in cell A5. Now when you calculate the last row with any of the methods given below, it will give you 5. Now color the cell A10 red. If you now use the any of the below code, you will still get 5. If you use Usedrange.Rows.Count what do you get? It won't be 5.
Here is a scenario to show how UsedRange works.
xlDown is equally unreliable.
Consider this code
lastrow = Range("A1").End(xlDown).Row
What would happen if there was only one cell (A1) which had data? You will end up reaching the last row in the worksheet! It's like selecting cell A1 and then pressing End key and then pressing Down Arrow key. This will also give you unreliable results if there are blank cells in a range.
CountA is also unreliable because it will give you incorrect result if there are blank cells in between.
And hence one should avoid the use of UsedRange, xlDown and CountA to find the last cell.
To find the last Row in Col E use this
With Sheets("Sheet1")
LastRow = .Range("E" & .Rows.Count).End(xlUp).Row
End With
If you notice that we have a . before Rows.Count. We often chose to ignore that. See THIS question on the possible error that you may get. I always advise using . before Rows.Count and Columns.Count. That question is a classic scenario where the code will fail because the Rows.Count returns 65536 for Excel 2003 and earlier and 1048576 for Excel 2007 and later. Similarly Columns.Count returns 256 and 16384, respectively.
The above fact that Excel 2007+ has 1048576 rows also emphasizes on the fact that we should always declare the variable which will hold the row value as Long instead of Integer else you will get an Overflow error.
Note that this approach will skip any hidden rows. Looking back at my screenshot above for column A, if row 8 were hidden, this approach would return 5 instead of 8.
To find the Effective last row in the sheet, use this. Notice the use of Application.WorksheetFunction.CountA(.Cells). This is required because if there are no cells with data in the worksheet then .Find will give you Run Time Error 91: Object Variable or With block variable not set
With Sheets("Sheet1")
If Application.WorksheetFunction.CountA(.Cells) <> 0 Then
lastrow = .Cells.Find(What:="*", _
After:=.Range("A1"), _
Lookat:=xlPart, _
LookIn:=xlFormulas, _
SearchOrder:=xlByRows, _
SearchDirection:=xlPrevious, _
MatchCase:=False).Row
Else
lastrow = 1
End If
End With
The same principles apply, for example to get the last row in the third column of a table:
Sub FindLastRowInExcelTableColAandB()
Dim lastRow As Long
Dim ws As Worksheet, tbl as ListObject
Set ws = Sheets("Sheet1") 'Modify as needed
'Assuming the name of the table is "Table1", modify as needed
Set tbl = ws.ListObjects("Table1")
With tbl.ListColumns(3).Range
lastrow = .Find(What:="*", _
After:=.Cells(1), _
Lookat:=xlPart, _
LookIn:=xlFormulas, _
SearchOrder:=xlByRows, _
SearchDirection:=xlPrevious, _
MatchCase:=False).Row
End With
End Sub
Note: this answer was motivated by this comment. The purpose of UsedRange is different from what is mentioned in the answer above.
As to the correct way of finding the last used cell, one has first to decide what is considered used, and then select a suitable method. I conceive at least three meanings:
Used = non-blank, i.e., having data.
Used = "... in use, meaning the section that contains data or formatting." As per official documentation, this is the criterion used by Excel at the time of saving. See also this official documentation. If one is not aware of this, the criterion may produce unexpected results, but it may also be intentionally exploited (less often, surely), e.g., to highlight or print specific regions, which may eventually have no data. And, of course, it is desirable as a criterion for the range to use when saving a workbook, lest losing part of one's work.
Used = "... in use, meaning the section that contains data or formatting" or conditional formatting. Same as 2., but also including cells that are the target for any Conditional Formatting rule.
How to find the last used cell depends on what you want (your criterion).
For criterion 1, I suggest reading this answer.
Note that UsedRange is cited as unreliable. I think that is misleading (i.e., "unfair" to UsedRange), as UsedRange is simply not meant to report the last cell containing data. So it should not be used in this case, as indicated in that answer. See also this comment.
For criterion 2, UsedRange is the most reliable option, as compared to other options also designed for this use. It even makes it unnecessary to save a workbook to make sure that the last cell is updated.
Ctrl+End will go to a wrong cell prior to saving
(“The last cell is not reset until you save the worksheet”, from
http://msdn.microsoft.com/en-us/library/aa139976%28v=office.10%29.aspx.
It is an old reference, but in this respect valid).
For criterion 3, I do not know any built-in method.
Criterion 2 does not account for Conditional Formatting. One may have formatted cells, based on formulas, which are not detected by UsedRange or Ctrl+End.
In the figure, the last cell is B3, since formatting was applied explicitly to it. Cells B6:D7 have a format derived from a Conditional Formatting rule, and this is not detected even by UsedRange.
Accounting for this would require some VBA programming.
As to your specific question: What's the reason behind this?
Your code uses the first cell in your range E4:E48 as a trampoline, for jumping down with End(xlDown).
The "erroneous" output will obtain if there are no non-blank cells in your range other than perhaps the first. Then, you are leaping in the dark, i.e., down the worksheet (you should note the difference between blank and empty string!).
Note that:
If your range contains non-contiguous non-blank cells, then it will also give a wrong result.
If there is only one non-blank cell, but it is not the first one, your code will still give you the correct result.
I created this one-stop function for determining the last row, column and cell, be it for data, formatted (grouped/commented/hidden) cells or conditional formatting.
Sub LastCellMsg()
Dim strResult As String
Dim lngDataRow As Long
Dim lngDataCol As Long
Dim strDataCell As String
Dim strDataFormatRow As String
Dim lngDataFormatCol As Long
Dim strDataFormatCell As String
Dim oFormatCond As FormatCondition
Dim lngTempRow As Long
Dim lngTempCol As Long
Dim lngCFRow As Long
Dim lngCFCol As Long
Dim strCFCell As String
Dim lngOverallRow As Long
Dim lngOverallCol As Long
Dim strOverallCell As String
With ActiveSheet
If .ListObjects.Count > 0 Then
MsgBox "Cannot return reliable results, as there is at least one table in the worksheet."
Exit Sub
End If
strResult = "Workbook name: " & .Parent.Name & vbCrLf
strResult = strResult & "Sheet name: " & .Name & vbCrLf
'DATA:
'last data row
If Application.WorksheetFunction.CountA(.Cells) <> 0 Then
lngDataRow = .Cells.Find(What:="*", _
After:=.Range("A1"), _
Lookat:=xlPart, _
LookIn:=xlFormulas, _
SearchOrder:=xlByRows, _
SearchDirection:=xlPrevious, _
MatchCase:=False).Row
Else
lngDataRow = 1
End If
'strResult = strResult & "Last data row: " & lngDataRow & vbCrLf
'last data column
If Application.WorksheetFunction.CountA(.Cells) <> 0 Then
lngDataCol = .Cells.Find(What:="*", _
After:=.Range("A1"), _
Lookat:=xlPart, _
LookIn:=xlFormulas, _
SearchOrder:=xlByColumns, _
SearchDirection:=xlPrevious, _
MatchCase:=False).Column
Else
lngDataCol = 1
End If
'strResult = strResult & "Last data column: " & lngDataCol & vbCrLf
'last data cell
strDataCell = Replace(Cells(lngDataRow, lngDataCol).Address, "$", vbNullString)
strResult = strResult & "Last data cell: " & strDataCell & vbCrLf
'FORMATS:
'last data/formatted/grouped/commented/hidden row
strDataFormatRow = StrReverse(Split(StrReverse(.UsedRange.Address), "$")(0))
'strResult = strResult & "Last data/formatted row: " & strDataFormatRow & vbCrLf
'last data/formatted/grouped/commented/hidden column
lngDataFormatCol = Range(StrReverse(Split(StrReverse(.UsedRange.Address), "$")(1)) & "1").Column
'strResult = strResult & "Last data/formatted column: " & lngDataFormatCol & vbCrLf
'last data/formatted/grouped/commented/hidden cell
strDataFormatCell = Replace(Cells(strDataFormatRow, lngDataFormatCol).Address, "$", vbNullString)
strResult = strResult & "Last data/formatted cell: " & strDataFormatCell & vbCrLf
'CONDITIONAL FORMATS:
For Each oFormatCond In .Cells.FormatConditions
'last conditionally-formatted row
lngTempRow = CLng(StrReverse(Split(StrReverse(oFormatCond.AppliesTo.Address), "$")(0)))
If lngTempRow > lngCFRow Then lngCFRow = lngTempRow
'last conditionally-formatted column
lngTempCol = Range(StrReverse(Split(StrReverse(oFormatCond.AppliesTo.Address), "$")(1)) & "1").Column
If lngTempCol > lngCFCol Then lngCFCol = lngTempCol
Next
'no results are returned for Conditional Format if there is no such
If lngCFRow <> 0 Then
'strResult = strResult & "Last cond-formatted row: " & lngCFRow & vbCrLf
'strResult = strResult & "Last cond-formatted column: " & lngCFCol & vbCrLf
'last conditionally-formatted cell
strCFCell = Replace(Cells(lngCFRow, lngCFCol).Address, "$", vbNullString)
strResult = strResult & "Last cond-formatted cell: " & strCFCell & vbCrLf
End If
'OVERALL:
lngOverallRow = Application.WorksheetFunction.Max(lngDataRow, strDataFormatRow, lngCFRow)
'strResult = strResult & "Last overall row: " & lngOverallRow & vbCrLf
lngOverallCol = Application.WorksheetFunction.Max(lngDataCol, lngDataFormatCol, lngCFCol)
'strResult = strResult & "Last overall column: " & lngOverallCol & vbCrLf
strOverallCell = Replace(.Cells(lngOverallRow, lngOverallCol).Address, "$", vbNullString)
strResult = strResult & "Last overall cell: " & strOverallCell & vbCrLf
MsgBox strResult
Debug.Print strResult
End With
End Sub
Results look like this:
For more detailed results, some lines in the code can be uncommented:
One limitation exists - if there are tables in the sheet, results can become unreliable, so I decided to avoid running the code in this case:
If .ListObjects.Count > 0 Then
MsgBox "Cannot return reliable results, as there is at least one table in the worksheet."
Exit Sub
End If
One important note to keep in mind when using the solution ...
LastRow = ws.Cells.Find(What:="*", After:=ws.range("a1"), SearchOrder:=xlByRows, SearchDirection:=xlPrevious).Row
... is to ensure that your LastRow variable is of Long type:
Dim LastRow as Long
Otherwise you will end up getting OVERFLOW errors in certain situations in .XLSX workbooks
This is my encapsulated function that I drop in to various code uses.
Private Function FindLastRow(ws As Worksheet) As Long
' --------------------------------------------------------------------------------
' Find the last used Row on a Worksheet
' --------------------------------------------------------------------------------
If WorksheetFunction.CountA(ws.Cells) > 0 Then
' Search for any entry, by searching backwards by Rows.
FindLastRow = ws.Cells.Find(What:="*", After:=ws.range("a1"), SearchOrder:=xlByRows, SearchDirection:=xlPrevious).Row
End If
End Function
Since the original question is about problems with finding the last cell, in this answer I will list the various ways you can get unexpected results; see my answer to "How can I find last row that contains data in the Excel sheet with a macro?" for my take on solving this.
I'll start by expanding on the answer by sancho.s and the comment by GlennFromIowa, adding even more detail:
[...] one has first to decide what is considered used. I see at least 6 meanings. Cell has:
- 1) data, i.e., a formula, possibly resulting in a blank value;
- 2) a value, i.e., a non-blank formula or constant;
- 3) formatting;
- 4) conditional formatting;
- 5) a shape (including Comment) overlapping the cell;
- 6) involvement in a Table (List Object).
Which combination do you want to test for? Some (such as Tables) may be more difficult to test for, and some may be rare (such as a shape outside of data range), but others may vary based on the situation (e.g., formulas with blank values).
Other things you might want to consider:
With that in mind, let's see how the common ways of getting the "last cell" can produce unexpected results:
.End(xlDown) code from the question will break most easily (e.g. with a single non-empty cell or when there are blank cells in between) for the reasons explained in the answer by Siddharth Rout here (search for "xlDown is equally unreliable.") 👎Counting (CountA or Cells*.Count) or .CurrentRegion will also break in presence of blank cells or rows 👎.End(xlUp) to search backwards from the end of a column will, just as CTRL+UP, look for data (formulas producing a blank value are considered "data") in visible rows (so using it with autofilter enabled might produce incorrect results ⚠️). You have to take care to avoid the standard pitfalls (for details I'll again refer to the answer by Siddharth Rout here, look for the "Find Last Row in a Column" section), such as hard-coding the last row (Range("A65536").End(xlUp)) instead of relying on sht.Rows.Count.
.SpecialCells(xlLastCell) is equivalent to CTRL+END, returning the bottom-most and right-most cell of the "used range", so all caveats that apply to relying on the "used range", apply to this method as well. In addition, the "used range" is only reset when saving the workbook and when accessing worksheet.UsedRange, so xlLastCell might produce stale results⚠️ with unsaved modifications (e.g. after some rows were deleted). See the nearby answer by dotNET.sht.UsedRange (described in detail in the answer by sancho.s here) considers both data and formatting (though not conditional formatting) and resets the "used range" of the worksheet, which may or may not be what you want.Note that a common mistake ️is to use .UsedRange.Rows.Count⚠️, which returns the number of rows in the used range, not the last row number (they will be different if the first few rows are blank), for details see newguy's answer to How can I find last row that contains data in the Excel sheet with a macro?
.Find allows you to find the last row with any data (including formulas) or a non-blank value in any column. You can choose whether you're interested in formulas or values, but the catch is that it resets the defaults in the Excel's Find dialog ️️⚠️, which can be highly confusing to your users. It also needs to be used carefully, see the answer by Siddharth Rout here (section "Find Last Row in a Sheet")Cells' in a loop are generally slower than re-using an Excel function (although can still be performant), but let you specify exactly what you want to find. See my solution based on UsedRange and VBA arrays to find the last cell with data in the given column -- it handles hidden rows, filters, blanks, does not modify the Find defaults and is quite performant.Whatever solution you pick, be careful
Long instead of Integer to store the row numbers (to avoid getting Overflow with more than 65k rows) andDim ws As Worksheet ... ws.Range(...) instead of Range(...)).Value (which is a Variant) avoid implicit casts like .Value <> "" as they will fail if the cell contains an error value.I would add to the answer given by Siddarth Rout to say that the CountA call can be skipped by having Find return a Range object, instead of a row number, and then test the returned Range object to see if it is Nothing (blank worksheet).
Also, I would have my version of any LastRow procedure return a zero for a blank worksheet, then I can know it is blank.
I wonder that nobody has mentioned this, But the easiest way of getting the last used cell is:
Function GetLastCell(sh as Worksheet) As Range
GetLastCell = sh.Cells(1,1).SpecialCells(xlLastCell)
End Function
This essentially returns the same cell that you get by Ctrl + End after selecting Cell A1.
A word of caution: Excel keeps track of the most bottom-right cell that was ever used in a worksheet. So if for example you enter something in B3 and something else in H8 and then later on delete the contents of H8, pressing Ctrl + End will still take you to H8 cell. The above function will have the same behavior.
However this question is seeking to find the last row using VBA, I think it would be good to include an array formula for worksheet function as this gets visited frequently:
{=ADDRESS(MATCH(INDEX(D:D,MAX(IF(D:D<>"",ROW(D:D)-ROW(D1)+1)),1),D:D,0),COLUMN(D:D))}
You need to enter the formula without brackets and then hit Shift + Ctrl + Enter to make it an array formula.
This will give you address of last used cell in the column D.
Thanks to pgsystemtester, this will give you the row number of last used cell:
{=MATCH(INDEX(D:D,MAX(IF(D:D<>"",ROW(D:D)-ROW(D1)+1)),1),D:D,0)}
I was looking for a way to mimic the CTRL+Shift+End, so dotNET solution is great, except with my Excel 2010 I need to add a set if I want to avoid an error:
Function GetLastCell(sh As Worksheet) As Range
Set GetLastCell = sh.Cells(1, 1).SpecialCells(xlLastCell)
End Function
and how to check this for yourself:
Sub test()
Dim ws As Worksheet, r As Range
Set ws = ActiveWorkbook.Sheets("Sheet1")
Set r = GetLastCell(ws)
MsgBox r.Column & "-" & r.Row
End Sub
Here's my two cents.
IMHO the risk of a hidden row with data being excluded is too significant to let xlUp be considered a One stop answer. I agree it's simple and will work MOST of the time, but it presents the risk of understating the last row, without any warning. This could produce CATASTROPHIC results at some poinit for someone who jumped on Stack Overlow and was looking to "sure way" to capture this value.
The Find method is flawless with respect to reliably pulling the last non-blank row and it would be my One Stop Answer. However the drawback of changing the Find settings can be annoying, particularly if this is part of a UDF.
The other answers posted are okay, however the complexity gets a little excessive. Thus here's my attempt to find a balance of reliability, minimal complexity, and not using Find.
Function LastRowNumber(Optional rng As Range) As Long
If rng Is Nothing Then
Set rng = ActiveSheet.UsedRange
Else
Set rng = Intersect(rng.Parent.UsedRange, rng.EntireColumn)
If rng Is Nothing Then
LastRowNumber = 1
Exit Function
ElseIf isE = 0 Then
LastRowNumber = 1
Exit Function
End If
End If
LastRowNumber = rng.Cells(rng.Rows.Count, 1).Row
Do While IsEmpty(Intersect(rng, _
rng.Parent.Rows(LastRowNumber)))
LastRowNumber = LastRowNumber - 1
Loop
End Function
Why this is good:
Find settingsWhy this is bad:
However, I think a One-Stop-Solution that has a drawback of messing up find settings or performing slower is a better overall solution. A user can then tinker with their settings to try to improve, knowing what's going on with their code. Using xLUp will not warn of the potential risks and they could carry on for who knows how long not knowing their code was not working correctly.
Sub lastRow()
Dim i As Long
i = Cells(Rows.Count, 1).End(xlUp).Row
MsgBox i
End Sub
sub LastRow()
'Paste & for better understanding of the working use F8 Key to run the code .
dim WS as worksheet
dim i as long
set ws = thisworkbook("SheetName")
ws.activate
ws.range("a1").select
ws.range("a1048576").select
activecell.end(xlup).select
i= activecell.row
msgbox "My Last Row Is " & i
End sub
For the last 3+ years these are the functions that I am using for finding last row and last column per defined column(for row) and row(for column):
Function lastCol(Optional wsName As String, Optional rowToCheck As Long = 1) As Long
Dim ws As Worksheet
If wsName = vbNullString Then
Set ws = ActiveSheet
Else
Set ws = Worksheets(wsName)
End If
lastCol = ws.Cells(rowToCheck, ws.Columns.Count).End(xlToLeft).Column
End Function
Function lastRow(Optional wsName As String, Optional columnToCheck As Long = 1) As Long
Dim ws As Worksheet
If wsName = vbNullString Then
Set ws = ActiveSheet
Else
Set ws = Worksheets(wsName)
End If
lastRow = ws.Cells(ws.Rows.Count, columnToCheck).End(xlUp).Row
End Function
For the case of the OP, this is the way to get the last row in column E:
Debug.Print lastRow(columnToCheck:=Range("E4:E48").Column)
Here we may use the well-known Excel formulas, which give us the last row of a worksheet in Excel, without involving VBA - =IFERROR(LOOKUP(2,1/(NOT(ISBLANK(A:A))),ROW(A:A)),0)
In order to put this in VBA and not to write anything in Excel, using the parameters for the latter functions, something like this could be in mind:
Public Function LastRowWithHidden(Optional wsName As String, Optional columnToCheck As Long = 1) As Long
Dim ws As Worksheet
If wsName = vbNullString Then
Set ws = ActiveSheet
Else
Set ws = Worksheets(wsName)
End If
Dim letters As String
letters = ColLettersGenerator(columnToCheck)
LastRowWithHidden = ws.Evaluate("=IFERROR(LOOKUP(2,1/(NOT(ISBLANK(" & letters & "))),ROW(" & letters & " )),0)")
End Function
Function ColLettersGenerator(col As Long) As String
Dim result As Variant
result = Split(Cells(1, col).Address(True, False), "$")
ColLettersGenerator = result(0) & ":" & result(0)
End Function
I created this universal function for last row, regardless of range type. Just give it any cell reference whatsoever and it will return the last row. No hassle having to knew range characteristics, especially if your ranges are some times a regular range and sometimes a ListObject. Using a regular range method on a table might return wrong results. Sure you can plan ahead of time and use the right method each time, but why bother if you can utilizes a universal function ?
Sub RunMyLastRow() Dim Result As Long Result = MyLastRow(Worksheets(1).Range("A1")) End Sub
Function MyLastRow(RefrenceRange As Range) As Long
Dim WS As Worksheet
Dim TableName As String
Dim ColNumber As Long
Dim LastRow As Long
Dim FirstColumnTable As Long
Dim ColNumberTable As Long
Set WS = RefrenceRange.Worksheet
TableName = GetTableName(RefrenceRange)
ColNumber = RefrenceRange.Column
''If the table (ListObject) does not start in column "A" we need to calculate the
''first Column table and how many Columns from its beginning the Column is located.
If TableName <> vbNullString Then
FirstColumnTable = WS.ListObjects(TableName).ListColumns(1).Range.Column
ColNumberTable = ColNumber - FirstColumnTable + 1
End If
If TableName = vbNullString Then
LastRow = WS.Cells(WS.Rows.Count, ColNumber).End(xlUp).Row
Else
LastRow = WS.ListObjects(TableName).ListColumns(ColNumberTable).Range.Find( _
What:="*", SearchOrder:=xlByRows, SearchDirection:=xlPrevious).Row
End If
MyLastRow = LastRow
End Function
''Get Table Name by Cell Range Function GetTableName(RefrenceRange As Range) As String If RefrenceRange.ListObject Is Nothing Then GetTableName = vbNullString Else GetTableName = RefrenceRange.ListObject.Name End If End Function
