How to set cornerRadius for only top-left and top-right corner of a UIView?

Question

Is there a way to set cornerRadius for only top-left and top-right corner of a UIView?

I tried the following, but it end up not seeing the view anymore.

UIView *view = [[UIView alloc] initWithFrame:frame];

CALayer *layer = [CALayer layer];
UIBezierPath *shadowPath = [UIBezierPath bezierPathWithRoundedRect:frame byRoundingCorners:(UIRectCornerTopLeft|UIRectCornerTopRight) cornerRadii:CGSizeMake(3.0, 3.0)];
layer.shadowPath = shadowPath.CGPath;
view.layer.mask = layer;

Answer 1

Pay attention to the fact that if you have layout constraints attached to it, you must refresh this as follows in your UIView subclass:

override func layoutSubviews() {
    super.layoutSubviews()
    roundCorners(corners: [.topLeft, .topRight], radius: 3.0)
}

If you don't do that it won't show up.

---

And to round corners, use the extension:

extension UIView {
   func roundCorners(corners: UIRectCorner, radius: CGFloat) {
        let path = UIBezierPath(roundedRect: bounds, byRoundingCorners: corners, cornerRadii: CGSize(width: radius, height: radius))
        let mask = CAShapeLayer()
        mask.path = path.cgPath
        layer.mask = mask
    }
}

---

---

Additional view controller case: Whether you can't or wouldn't want to subclass a view, you can still round a view. Do it from its view controller by overriding the viewWillLayoutSubviews() function, as follows:

class MyVC: UIViewController {
    /// The view to round the top-left and top-right hand corners
    let theView: UIView = {
        let v = UIView(frame: CGRect(x: 10, y: 10, width: 200, height: 200))
        v.backgroundColor = .red
        return v
    }()
    
    override func loadView() {
        super.loadView()
        view.addSubview(theView)
    }
    
    override func viewWillLayoutSubviews() {
        super.viewWillLayoutSubviews()

        // Call the roundCorners() func right there.
        theView.roundCorners(corners: [.topLeft, .topRight], radius: 30)
    }
}

Answer 2

I am not sure why your solution did not work but the following code is working for me. Create a bezier mask and apply it to your view. In my code below I was rounding the bottom corners of the _backgroundView with a radius of 3 pixels. self is a custom UITableViewCell:

UIBezierPath *maskPath = [UIBezierPath
    bezierPathWithRoundedRect:self.backgroundImageView.bounds
    byRoundingCorners:(UIRectCornerBottomLeft | UIRectCornerBottomRight)
    cornerRadii:CGSizeMake(20, 20)
];

CAShapeLayer *maskLayer = [CAShapeLayer layer];

maskLayer.frame = self.bounds;
maskLayer.path = maskPath.CGPath;

self.backgroundImageView.layer.mask = maskLayer;

Swift version with some improvements:

let path = UIBezierPath(roundedRect:viewToRound.bounds, byRoundingCorners:[.TopRight, .BottomLeft], cornerRadii: CGSizeMake(20, 20))
let maskLayer = CAShapeLayer()

maskLayer.path = path.CGPath
viewToRound.layer.mask = maskLayer

Swift 3.0 version:

let path = UIBezierPath(roundedRect:viewToRound.bounds,
                        byRoundingCorners:[.topRight, .bottomLeft],
                        cornerRadii: CGSize(width: 20, height:  20))

let maskLayer = CAShapeLayer()

maskLayer.path = path.cgPath
viewToRound.layer.mask = maskLayer

Swift extension here

Answer 3

And finally… there is CACornerMask in iOS11! With CACornerMask it can be done pretty easy:

let view = UIView()
view.clipsToBounds = true
view.layer.cornerRadius = 10
view.layer.maskedCorners = [.layerMaxXMinYCorner, .layerMinXMinYCorner] // Top right corner, Top left corner respectively

Answer 4

Here is a Swift version of @JohnnyRockex answer

extension UIView {

    func roundCorners(_ corners: UIRectCorner, radius: CGFloat) {
         let path = UIBezierPath(roundedRect: self.bounds, byRoundingCorners: corners, cornerRadii: CGSize(width: radius, height: radius))
         let mask = CAShapeLayer()
         mask.path = path.cgPath
         self.layer.mask = mask
    }

}

---

view.roundCorners([.topLeft, .bottomRight], radius: 10)

Note

If you're using Auto Layout, you'll need to subclass your UIView and call roundCorners in the view's layoutSubviews for optimal effect.

class View: UIView {
    override func layoutSubviews() {
        super.layoutSubviews()

        self.roundCorners([.topLeft, .bottomLeft], radius: 10)
    }
}

Answer 5

Swift code example here: https://stackoverflow.com/a/35621736/308315

---

Not directly. You will have to:

1. Create a CAShapeLayer
2. Set its path to be a CGPathRef based on view.bounds but with only two rounded corners (probably by using +[UIBezierPath bezierPathWithRoundedRect:byRoundingCorners:cornerRadii:])
3. Set your view.layer.mask to be the CAShapeLayer

Answer 6

Here is a short method implemented like this:

- (void)viewDidLoad {
    [super viewDidLoad];
    UIButton *openInMaps = [UIButton new];
    [openInMaps setFrame:CGRectMake(15, 135, 114, 70)];
    openInMaps = (UIButton *)[self roundCornersOnView:openInMaps onTopLeft:NO topRight:NO bottomLeft:YES bottomRight:NO radius:5.0];
}

- (UIView *)roundCornersOnView:(UIView *)view onTopLeft:(BOOL)tl topRight:(BOOL)tr bottomLeft:(BOOL)bl bottomRight:(BOOL)br radius:(float)radius {

    if (tl || tr || bl || br) {
        UIRectCorner corner = 0;
        if (tl) {corner = corner | UIRectCornerTopLeft;}
        if (tr) {corner = corner | UIRectCornerTopRight;}
        if (bl) {corner = corner | UIRectCornerBottomLeft;}
        if (br) {corner = corner | UIRectCornerBottomRight;}

        UIView *roundedView = view;
        UIBezierPath *maskPath = [UIBezierPath bezierPathWithRoundedRect:roundedView.bounds byRoundingCorners:corner cornerRadii:CGSizeMake(radius, radius)];
        CAShapeLayer *maskLayer = [CAShapeLayer layer];
        maskLayer.frame = roundedView.bounds;
        maskLayer.path = maskPath.CGPath;
        roundedView.layer.mask = maskLayer;
        return roundedView;
    }
    return view;
}

Answer 7

In Swift 4.1 and Xcode 9.4.1

In iOS 11 this single line is enough:

detailsSubView.layer.maskedCorners = [.layerMinXMinYCorner, .layerMaxXMinYCorner]//Set your view here

See the complete code:

//In viewDidLoad
if #available(iOS 11.0, *) {
        detailsSubView.clipsToBounds = false
        detailsSubView.layer.cornerRadius = 10
        detailsSubView.layer.maskedCorners = [.layerMinXMinYCorner, .layerMaxXMinYCorner]
} else {
      //For lower versions
}

But for lower versions

let rectShape = CAShapeLayer()
    rectShape.bounds = detailsSubView.frame
    rectShape.position = detailsSubView.center
    rectShape.path = UIBezierPath(roundedRect: detailsSubView.bounds,    byRoundingCorners: [.topLeft , .topRight], cornerRadii: CGSize(width: 20, height: 20)).cgPath
    detailsSubView.layer.mask = rectShape

Complete code is.

if #available(iOS 11.0, *) {
    detailsSubView.clipsToBounds = false
    detailsSubView.layer.cornerRadius = 10
    detailsSubView.layer.maskedCorners = [.layerMinXMinYCorner, .layerMaxXMinYCorner]
} else {
    let rectShape = CAShapeLayer()
    rectShape.bounds = detailsSubView.frame
    rectShape.position = detailsSubView.center
    rectShape.path = UIBezierPath(roundedRect: detailsSubView.bounds,    byRoundingCorners: [.topLeft , .topRight], cornerRadii: CGSize(width: 20, height: 20)).cgPath
    detailsSubView.layer.mask = rectShape
}

If you are using AutoResizing in storyboard write this code in viewDidLayoutSubviews().

override func viewDidLayoutSubviews() {
    super.viewDidLayoutSubviews()

    if #available(iOS 11.0, *) {
        detailsSubView.clipsToBounds = false
        detailsSubView.layer.cornerRadius = 10
        detailsSubView.layer.maskedCorners = [.layerMinXMinYCorner, .layerMaxXMinYCorner]
    } else {
        let rectShape = CAShapeLayer()
        rectShape.bounds = detailsSubView.frame
        rectShape.position = detailsSubView.center
        rectShape.path = UIBezierPath(roundedRect: detailsSubView.bounds,    byRoundingCorners: [.topLeft , .topRight], cornerRadii: CGSize(width: 20, height: 20)).cgPath
        detailsSubView.layer.mask = rectShape
    }
}

Answer 8

This would be the simplest answer:

yourView.layer.cornerRadius = 8
yourView.layer.masksToBounds = true
yourView.layer.maskedCorners = [.layerMinXMinYCorner, .layerMaxXMinYCorner]

Answer 9

iOS 11 , Swift 4
And you can try this code:

if #available(iOS 11.0, *) {
   element.clipsToBounds = true
   element.layer.cornerRadius = CORNER_RADIUS
   element.layer.maskedCorners = [.layerMaxXMaxYCorner]
} else {
   // Fallback on earlier versions
}

And you can using this in table view cell.

Answer 10

There is a super simple way of doing it. I found it on here.

view.clipsToBounds = true
view.layer.cornerRadius = 24
view.layer.maskedCorners = [.layerMinXMinYCorner, .layerMaxXMinYCorner]

It uses the stock cornerRadius property on the CALayer of a view. You just need to define the corners. layerMinXMinYCorner is top left layerMaxXMinYCorner is top right.

Answer 11

Swift 4 Swift 5 easy way in 1 line

Usage:

//MARK:- Corner Radius of only two side of UIViews
self.roundCorners(view: yourview, corners: [.bottomLeft, .topRight], radius: 12.0)

Function:

//MARK:- Corner Radius of only two side of UIViews
func roundCorners(view :UIView, corners: UIRectCorner, radius: CGFloat){
        let path = UIBezierPath(roundedRect: view.bounds, byRoundingCorners: corners, cornerRadii: CGSize(width: radius, height: radius))
        let mask = CAShapeLayer()
        mask.path = path.cgPath
        view.layer.mask = mask
}

In Objective-C

Usage:

[self.verticalSeparatorView roundCorners:UIRectCornerTopLeft | UIRectCornerTopRight radius:10.0];

Function used in a Category (only one corner):

-(void)roundCorners: (UIRectCorner) corners radius:(CGFloat)radius {
        UIBezierPath *path = [UIBezierPath bezierPathWithRoundedRect:self.bounds byRoundingCorners:corners cornerRadii:CGSizeMake(radius, radius)];
        CAShapeLayer *mask = [[CAShapeLayer alloc] init];
        mask.path = path.CGPath;
        self.layer.mask = mask;
    }

Answer 12

Try this code,

UIBezierPath *maskPath = [UIBezierPath bezierPathWithRoundedRect:view.bounds byRoundingCorners:( UIRectCornerTopLeft | UIRectCornerTopRight) cornerRadii:CGSizeMake(5.0, 5.0)];

CAShapeLayer *maskLayer = [[CAShapeLayer alloc] init];
maskLayer.frame = self.view.bounds;
maskLayer.path  = maskPath.CGPath;

view.layer.mask = maskLayer;

Answer 13

Emma: .TopRight and .BottomRight are not working for you perhaps because the call to view.roundCorners is done BEFORE final view bounds are calculated. Note that the Bezier Path derives from the view bounds at the time it is called. For example, if auto layout will narrow the view, the round corners on the right side might be outside the view. Try to call it in viewDidLayoutSubviews, where the view's bound is final.

Answer 14

My solution for rounding specific corners of UIView and UITextFiels in swift is to use

.layer.cornerRadius

and

layer.maskedCorners

of actual UIView or UITextFields.

Example:

fileprivate func inputTextFieldStyle() {
        inputTextField.layer.masksToBounds = true
        inputTextField.layer.borderWidth = 1
        inputTextField.layer.cornerRadius = 25
        inputTextField.layer.maskedCorners = [.layerMaxXMaxYCorner,.layerMaxXMinYCorner]
        inputTextField.layer.borderColor = UIColor.white.cgColor
    }

And by using

.layerMaxXMaxYCorner

and

.layerMaxXMinYCorner

, I can specify top right and bottom right corner of the UITextField to be rounded.

You can see the result here:

Answer 15

Swift 4

extension UIView {

    func roundTop(radius:CGFloat = 5){
        self.clipsToBounds = true
        self.layer.cornerRadius = radius
        if #available(iOS 11.0, *) {
            self.layer.maskedCorners = [.layerMaxXMinYCorner, .layerMinXMinYCorner]
        } else {
            // Fallback on earlier versions
        }
    }

    func roundBottom(radius:CGFloat = 5){
        self.clipsToBounds = true
        self.layer.cornerRadius = radius
        if #available(iOS 11.0, *) {
            self.layer.maskedCorners = [.layerMaxXMaxYCorner, .layerMinXMaxYCorner]
        } else {
            // Fallback on earlier versions
        }
    }
}

Answer 16

Simple extension

extension UIView {
    func roundCorners(corners: UIRectCorner, radius: CGFloat) {
        if #available(iOS 11, *) {
            self.clipsToBounds = true
            self.layer.cornerRadius = radius
            var masked = CACornerMask()
            if corners.contains(.topLeft) { masked.insert(.layerMinXMinYCorner) }
            if corners.contains(.topRight) { masked.insert(.layerMaxXMinYCorner) }
            if corners.contains(.bottomLeft) { masked.insert(.layerMinXMaxYCorner) }
            if corners.contains(.bottomRight) { masked.insert(.layerMaxXMaxYCorner) }
            self.layer.maskedCorners = masked
        }
        else {
            let path = UIBezierPath(roundedRect: bounds, byRoundingCorners: corners, cornerRadii: CGSize(width: radius, height: radius))
            let mask = CAShapeLayer()
            mask.path = path.cgPath
            layer.mask = mask
        }
    }
}

Usage:

view.roundCorners(corners: [.bottomLeft, .bottomRight], radius: 12)

Answer 17

A way to do this programmatically would be to create a UIView over the top part of the UIView that has the rounded corners. Or you could hide the top underneath something.

Answer 18

    // Create the path (with only the top-left corner rounded)
UIBezierPath *maskPath = [UIBezierPath bezierPathWithRoundedRect:view.bounds 
                           byRoundingCorners:(UIRectCornerBottomLeft | UIRectCornerBottomRight) 
                           cornerRadii:CGSizeMake(7.0, 7.0)];

// Create the shape layer and set its path
CAShapeLayer *maskLayer = [CAShapeLayer layer];
maskLayer.frame = cell.stripBlackImnageView.bounds;
maskLayer.path = maskPath.CGPath; 
// Set the newly created shapelayer as the mask for the image view's layer
view.layer.mask = maskLayer;

Answer 19

The easiest way would be to make a mask with a rounded corner layer.

CALayer *maskLayer = [CALayer layer];
maskLayer.frame = CGRectMake(0,0,maskWidth ,maskHeight);
maskLayer.contents = (__bridge id)[[UIImage imageNamed:@"maskImageWithRoundedCorners.png"] CGImage];

aUIView.layer.mask = maskLayer;

And don't forget to:

#import <QuartzCore/QuartzCore.h>

Answer 20

All of the answers already given are really good and valid (especially Yunus idea of using the mask property).

However I needed something a little more complex because my layer could often change sizes which mean I needed to call that masking logic every time and this was a little bit annoying.

I used swift extensions and computed properties to build a real cornerRadii property which takes care of auto updating the mask when layer is layed out.

This was achieved using Peter Steinberg great Aspects library for swizzling.

Full code is here:

extension CALayer {
  // This will hold the keys for the runtime property associations
  private struct AssociationKey {
    static var CornerRect:Int8 = 1    // for the UIRectCorner argument
    static var CornerRadius:Int8 = 2  // for the radius argument
  }

  // new computed property on CALayer
  // You send the corners you want to round (ex. [.TopLeft, .BottomLeft])
  // and the radius at which you want the corners to be round
  var cornerRadii:(corners: UIRectCorner, radius:CGFloat) {
    get {
      let number = objc_getAssociatedObject(self, &AssociationKey.CornerRect)  as? NSNumber ?? 0
      let radius = objc_getAssociatedObject(self, &AssociationKey.CornerRadius)  as? NSNumber ?? 0
      return (corners: UIRectCorner(rawValue: number.unsignedLongValue), radius: CGFloat(radius.floatValue))
    }
    set (v) {
      let radius = v.radius
      let closure:((Void)->Void) = {
        let path = UIBezierPath(roundedRect: self.bounds, byRoundingCorners: v.corners, cornerRadii: CGSize(width: radius, height: radius))
        let mask = CAShapeLayer()
        mask.path = path.CGPath
        self.mask = mask
      }
      let block: @convention(block) Void -> Void = closure
      let objectBlock = unsafeBitCast(block, AnyObject.self)
      objc_setAssociatedObject(self, &AssociationKey.CornerRect, NSNumber(unsignedLong: v.corners.rawValue), .OBJC_ASSOCIATION_RETAIN)
      objc_setAssociatedObject(self, &AssociationKey.CornerRadius, NSNumber(float: Float(v.radius)), .OBJC_ASSOCIATION_RETAIN)
      do { try aspect_hookSelector("layoutSublayers", withOptions: .PositionAfter, usingBlock: objectBlock) }
      catch _ { }
    }
  }
}

I wrote a simple blog post explaining this.

Answer 21

A lovely extension to reuse Yunus Nedim Mehel solution

Swift 2.3

extension UIView {
func roundCornersWithLayerMask(cornerRadii: CGFloat, corners: UIRectCorner) {
    let path = UIBezierPath(roundedRect: bounds,
                            byRoundingCorners: corners,
                            cornerRadii: CGSize(width: cornerRadii, height: cornerRadii))
    let maskLayer = CAShapeLayer()
    maskLayer.path = path.CGPath
    layer.mask = maskLayer
} }

Usage

let view = UIView()
view.roundCornersWithLayerMask(10,[.TopLeft,.TopRight])

Answer 22

If you're looking for an interface builder only solution there is one for iOS 11 and higher. See my answer here: https://stackoverflow.com/a/58626264

Answer 23

This is how you can set a corner radius for each corner of a button with Xamarin in C#:

var maskPath = UIBezierPath.FromRoundedRect(MyButton.Bounds, UIRectCorner.BottomLeft | UIRectCorner.BottomRight,
    new CGSize(10.0, 10.0));
var maskLayer = new CAShapeLayer
{
    Frame = MyButton.Bounds,
    Path = maskPath.CGPath
};
MyButton.Layer.Mask = maskLayer;

Answer 24

For SwiftUI

I found these solutions you can check from here https://stackoverflow.com/a/56763282/3716103

I highly recommend the first one

Option 1: Using Path + GeometryReader

(more info on GeometryReader: https://swiftui-lab.com/geometryreader-to-the-rescue/)

struct ContentView : View {
    var body: some View {

        Text("Hello World!")
            .foregroundColor(.white)
            .font(.largeTitle)
            .padding(20)
            .background(RoundedCorners(color: .blue, tl: 0, tr: 30, bl: 30, br: 0))
    }
}

RoundedCorners

struct RoundedCorners: View {

    var color: Color = .white

    var tl: CGFloat = 0.0
    var tr: CGFloat = 0.0
    var bl: CGFloat = 0.0
    var br: CGFloat = 0.0

    var body: some View {
        GeometryReader { geometry in
            Path { path in

                let w = geometry.size.width
                let h = geometry.size.height

                // Make sure we do not exceed the size of the rectangle
                let tr = min(min(self.tr, h/2), w/2)
                let tl = min(min(self.tl, h/2), w/2)
                let bl = min(min(self.bl, h/2), w/2)
                let br = min(min(self.br, h/2), w/2)

                path.move(to: CGPoint(x: w / 2.0, y: 0))
                path.addLine(to: CGPoint(x: w - tr, y: 0))
                path.addArc(center: CGPoint(x: w - tr, y: tr), radius: tr, startAngle: Angle(degrees: -90), endAngle: Angle(degrees: 0), clockwise: false)
                path.addLine(to: CGPoint(x: w, y: h - be))
                path.addArc(center: CGPoint(x: w - br, y: h - br), radius: br, startAngle: Angle(degrees: 0), endAngle: Angle(degrees: 90), clockwise: false)
                path.addLine(to: CGPoint(x: bl, y: h))
                path.addArc(center: CGPoint(x: bl, y: h - bl), radius: bl, startAngle: Angle(degrees: 90), endAngle: Angle(degrees: 180), clockwise: false)
                path.addLine(to: CGPoint(x: 0, y: tl))
                path.addArc(center: CGPoint(x: tl, y: tl), radius: tl, startAngle: Angle(degrees: 180), endAngle: Angle(degrees: 270), clockwise: false)
            }
            .fill(self.color)
        }
    }
}

RoundedCorners_Previews

struct RoundedCorners_Previews: PreviewProvider {
    static var previews: some View {
        RoundedCorners(color: .pink, tl: 40, tr: 40, bl: 40, br: 40)
    }
}

Answer 25

After change bit of code @apinho In swift 4.3 working fine

extension UIView {
func roundCornersWithLayerMask(cornerRadii: CGFloat, corners: UIRectCorner) {
    let path = UIBezierPath(roundedRect: bounds,
                            byRoundingCorners: corners,
                            cornerRadii: CGSize(width: cornerRadii, height: cornerRadii))
    let maskLayer = CAShapeLayer()
    maskLayer.path = path.cgPath
    layer.mask = maskLayer
  }
}

To use this function for you view

YourViewName. roundCornersWithLayerMask(cornerRadii: 20,corners: [.topLeft,.topRight])

Answer 26

Another version of Stephane's answer.

import UIKit

    class RoundCornerView: UIView {
    var corners : UIRectCorner = [.topLeft,.topRight,.bottomLeft,.bottomRight]
        var roundCornerRadius : CGFloat = 0.0
        override func layoutSubviews() {
            super.layoutSubviews()
            if corners.rawValue > 0 && roundCornerRadius > 0.0 {
                self.roundCorners(corners: corners, radius: roundCornerRadius)
            }
        }
        private func roundCorners(corners: UIRectCorner, radius: CGFloat) {
            let path = UIBezierPath(roundedRect: bounds, byRoundingCorners: corners, cornerRadii: CGSize(width: radius, height: radius))
            let mask = CAShapeLayer()
            mask.path = path.cgPath
            layer.mask = mask
        }

    }

Answer 27

In Swift 4.2, Create it via @IBDesignable like this:

@IBDesignable

class DesignableViewCustomCorner: UIView {

    @IBInspectable var cornerRadious: CGFloat = 0 {
        didSet {
            let path = UIBezierPath(roundedRect: self.bounds, byRoundingCorners: [.topLeft, .topRight], cornerRadii: CGSize(width: cornerRadious, height: cornerRadious))
            let mask = CAShapeLayer()
            mask.path = path.cgPath
            self.layer.mask = mask
        }
    }

}

Answer 28

Use this extension, it'll cover everything.

extension UIView {

   func roundTopCorners(radius: CGFloat = 10) {
    
       self.clipsToBounds = true
       self.layer.cornerRadius = radius
       if #available(iOS 11.0, *) {
           self.layer.maskedCorners = [.layerMinXMinYCorner, .layerMaxXMinYCorner]
       } else {
           self.roundCorners(corners: [.topLeft, .topRight], radius: radius)
       }
   }

   func roundBottomCorners(radius: CGFloat = 10) {
    
       self.clipsToBounds = true
       self.layer.cornerRadius = radius
       if #available(iOS 11.0, *) {
           self.layer.maskedCorners = [.layerMinXMaxYCorner, .layerMaxXMaxYCorner]
       } else {
           self.roundCorners(corners: [.bottomLeft, .bottomRight], radius: radius)
       }
   }

   private func roundCorners(corners: UIRectCorner, radius: CGFloat) {
    
        let path = UIBezierPath(roundedRect: bounds, byRoundingCorners: corners, cornerRadii: CGSize(width: radius, height: radius))
        let mask = CAShapeLayer()
        mask.path = path.cgPath
        layer.mask = mask
    }
}

and then use it like this:-

override func viewDidAppear(_ animated: Bool) {
    super.viewDidAppear(animated)
            
    self.yourView.roundTopCorners()
}

Note:- I'll recommend you to don't put this code inside viewDidLayoutSubviews(), because whenever view updates, you'll get call inside it. So use viewDidAppear(), it'll work like a charm.