I'm programming an application in Objective-C and I'm getting this error:
MyApp(2121,0xb0185000) malloc: *** error for object 0x1068310: double free
*** set a breakpoint in malloc_error_break to debug
It is happening when I release an NSAutoreleasePool and I can't figure out what object I'm releasing twice.
How do I set his breakpoint?
Is there a way to know what is this "object 0x1068310"?
When an object is "double-freed", the most common cause is that you're (unnecessarily) releasing an autoreleased object, and it is later autoreleased when the containing autorelease pool is emptied.
I've found that the best way to track down the extra release is to use the NSZombieEnabled environment variable for the affected executable in Xcode. For a quick rundown of how to use it, check out this CocoaDev wiki page. (In addition to this page, Apple has documented some incredibly obscure yet useful tips for debugging code in Xcode, some of which have saved my bacon more than a few times. I suggest checking out this Technical Note on developer.apple.com — link jumps to the section on Cocoa's Foundation framework).
Edit: You can often track the offending object down within the Xcode debugger, but it's often much easier if you use Instruments to assist you. From Xcode, choose Run → Start With Performance Tool → Object Allocations and you should be able to trace the offending object back to where it was created. (This will work best if you're enabled zombies as discussed above.) Note: Snow Leopard adds a Zombies tool to Instruments, accessible from the Run menu as well. Might be worth the $29 alone! ;-)
There is also a related SO question here.
You'll find out what the object is when you break in the debugger. Just look up the call stack and you will find where you free it. That will tell you which object it is.
The easiest way to set the breakpoint is to:
- Go to Run -> Show -> Breakpoints (ALT-Command-B)
- Scroll to the bottom of the list and add the symbol
malloc_error_break
I just want to add my experience in addition to the answer of Quinn Taylor.
In one of my apps, I have to parse and save data into core data objects and later on get these objects to display on the views. In fact, the app works just fine and does not crash at all, until I tried to do a stress test of navigating back and forth multiple times, tried to open multiple views as fast as possible. The app crashes with the above message.
I have tried all the methods that Quinn suggested in his answer and still failed to find out where was the exact cause.
I set NSZombieEnabled=YES, and NSStackLogging=YES, ran the command shell malloc_history to find out why, but still no luck. It always points out to where I save the data into core data objects, in fact, I have checked thousand times the over released objects there, nothing odd.
Running in Instruments with various tools(Allocations, Leaks, etc...) still did not help. Enable the Guard Malloc still got nothing.
Final rescue: I tried to come back to the views where the objects were taken from Core Data and sent a retain message to all of these objects, and took note to these changes. It solved the issue!!!
So, I found out that I failed to retain one, that's exactly the cause. Just want to share my experience so you have another rescue for your app.
Open up the debugger console by pressing Cmd+Shift+R. There, type
break malloc_error_break
to set a breakpoint at the beginning of the malloc_error_break function.
If you want to find out what object is located at address 0x1068310, you can type the following into the debugger console:
print-object 0x1068310
Of course, you have to do this while the object is still alive -- if the object has already been freed by the time you do this, then this will not work.
For me the issue was solved by
(gdb) call (void)_CFAutoreleasePoolPrintPools()
right after the crash. The address at the top of the stack was the address of the culprit. Threw in a retain and voila.
The address given in the log message did not get me anywhere. It never showed up in any of the various Instrumets. Apparently a pointer to some internal data which had already been freed.
Just an update to make this relevant to Xcode 4...
From the Xcode 4 User Guide:
To add a symbolic breakpoint . . .
- In the bottom-left corner of the breakpoint navigator, click the Add button.
- Choose Add Symbolic Breakpoint.
- Enter the symbol name in the Symbol field.
- Click Done.
Please find the below steps for how to find the object which is free and crash the application.
1) Click on the "Breakpoint navigator".
2) Then click on the "+" button which is below.
3) Add the "Symbolic Breakpoint..." from the list.
4) Add the "malloc_error_break" keyword on the "Symbol" option.
Or you can also refer the below GIF presentation.
This is what the malloc_error_break breakpoint looks like in the Breakpoints window in Xcode. Need to check the boxes to make it work.
alt text http://www.martijnthe.nl/wp-content/uploads/2009/08/Afbeelding-1.png
To find these kinds of memory and pointer problems in general, you want to run your code against a runtime memory error checker like Valgrind. This should be able to point out lots of things your code is doing wrong, beyond those that cause it to crash.
Valgrind can work on OSX (though it says it's "unsupported and incomplete and buggy"), and with a little hacking someone got it to work on iPhone SDK executables.
Even better you can try Instruments, which is part of XCode. There's a tutorial for running it here.
This is usually caused by some inspector, such as safari or safari preview. Refer to post or post and question.
Remove the select of AutoMatically Show Web ...., will remove this issue.
Note, just close safari or safari preview will not remove this issue. And you have to deselect both of safari and safari preview.
If this will not do, refer to this answer or post to debug it.
