361
votes

I'm trying to use the command line program convert to take a PDF into an image (JPEG or PNG). Here is one of the PDFs that I'm trying to convert.

I want the program to trim off the excess white-space and return a high enough quality image that the superscripts can be read with ease.

This is my current best attempt. As you can see, the trimming works fine, I just need to sharpen up the resolution quite a bit. This is the command I'm using:

convert -trim 24.pdf -resize 500% -quality 100 -sharpen 0x1.0 24-11.jpg

I've tried to make the following conscious decisions:

  • resize it larger (has no effect on the resolution)
  • make the quality as high as possible
  • use the -sharpen (I've tried a range of values)

Any suggestions please on getting the resolution of the image in the final PNG/JPEG higher would be greatly appreciated!

19
I don't know, you could also try link...karnok
If you're on a mac, have a look at the man page for sips, the "scriptable image processing system". It's a command line image editor built in to macOS, works on PDFs and many other image types.ghoti
@ghoti sips will only convert the first page of a PDF file to an image.benwiggy

19 Answers

414
votes

It appears that the following works:

convert           \
   -verbose       \
   -density 150   \
   -trim          \
    test.pdf      \
   -quality 100   \
   -flatten       \
   -sharpen 0x1.0 \
    24-18.jpg

It results in the left image. Compare this to the result of my original command (the image on the right):

  

(To really see and appreciate the differences between the two, right-click on each and select "Open Image in New Tab...".)

Also keep the following facts in mind:

  • The worse, blurry image on the right has a file size of 1.941.702 Bytes (1.85 MByte). Its resolution is 3060x3960 pixels, using 16-bit RGB color space.
  • The better, sharp image on the left has a file size of 337.879 Bytes (330 kByte). Its resolution is 758x996 pixels, using 8-bit Gray color space.

So, no need to resize; add the -density flag. The density value 150 is weird -- trying a range of values results in a worse looking image in both directions!

171
votes

Personally I like this.

convert -density 300 -trim test.pdf -quality 100 test.jpg

It's a little over twice the file size, but it looks better to me.

-density 300 sets the dpi that the PDF is rendered at.

-trim removes any edge pixels that are the same color as the corner pixels.

-quality 100 sets the JPEG compression quality to the highest quality.

Things like -sharpen don't work well with text because they undo things your font rendering system did to make it more legible.

If you actually want it blown up use resize here and possibly a larger dpi value of something like targetDPI * scalingFactor That will render the PDF at the resolution/size you intend.

Descriptions of the parameters on imagemagick.org are here

26
votes

I use pdftoppm on the command line to get the initial image, typically with a resolution of 300dpi, so pdftoppm -r 300, then use convert to do the trimming and PNG conversion.

20
votes

I really haven't had good success with convert [update May 2020: actually: it pretty much never works for me], but I've had EXCELLENT success with pdftoppm. Here's a couple examples of producing high-quality images from a PDF:

  1. [Produces ~25 MB-sized files per pg] Output uncompressed .tif file format at 300 DPI into a folder called "images", with files being named pg-1.tif, pg-2.tif, pg-3.tif, etc:

     mkdir -p images && pdftoppm -tiff -r 300 mypdf.pdf images/pg
    
  2. [Produces ~1MB-sized files per pg] Output in .jpg format at 300 DPI:

     mkdir -p images && pdftoppm -jpeg -r 300 mypdf.pdf images/pg
    
  3. [Produces ~2MB-sized files per pg] Output in .jpg format at highest quality (least compression) and still at 300 DPI:

     mkdir -p images && pdftoppm -jpeg -jpegopt quality=100 -r 300 mypdf.pdf images/pg
    

For more explanations, options, and examples, see my full answer here:

https://askubuntu.com/questions/150100/extracting-embedded-images-from-a-pdf/1187844#1187844.

Related:

  1. [How to turn a PDF into a searchable PDF w/pdf2searchablepdf] https://askubuntu.com/questions/473843/how-to-turn-a-pdf-into-a-text-searchable-pdf/1187881#1187881
  2. Cross-linked:
    1. How to convert a PDF into JPG with command line in Linux?
    2. https://unix.stackexchange.com/questions/11835/pdf-to-jpg-without-quality-loss-gscan2pdf/585574#585574
18
votes

normally I extract the embedded image with 'pdfimages' at the native resolution, then use ImageMagick's convert to the needed format:

$ pdfimages -list fileName.pdf
$ pdfimages fileName.pdf fileName   # save in .ppm format
$ convert fileName-000.ppm fileName-000.png

this generate the best and smallest result file.

Note: For lossy JPG embedded images, you had to use -j:

$ pdfimages -j fileName.pdf fileName   # save in .jpg format

With recent poppler you can use -all that save lossy as jpg and lossless as png

On little provided Win platform you had to download a recent (0.37 2015) 'poppler-util' binary from: http://blog.alivate.com.au/poppler-windows/

13
votes

I have found it both faster and more stable when batch-processing large PDFs into PNGs and JPGs to use the underlying gs (aka Ghostscript) command that convert uses.

You can see the command in the output of convert -verbose and there are a few more tweaks possible there (YMMV) that are difficult / impossible to access directly via convert.

However, it would be harder to do your trimming and sharpening using gs, so, as I said, YMMV!

11
votes

It also gives you good results:

exec("convert -geometry 1600x1600 -density 200x200 -quality 100 test.pdf test_image.jpg");
10
votes

In ImageMagick, you can do "supersampling". You specify a large density and then resize down as much as desired for the final output size. For example with your image:

convert -density 600 test.pdf -background white -flatten -resize 25% test.png


enter image description here

Download the image to view at full resolution for comparison..

I do not recommend saving to JPG if you are expecting to do further processing.

If you want the output to be the same size as the input, then resize to the inverse of the ratio of your density to 72. For example, -density 288 and -resize 25%. 288=4*72 and 25%=1/4

The larger the density the better the resulting quality, but it will take longer to process.

7
votes

Linux user here: I tried the convert command-line utility (for PDF to PNG) and I was not happy with the results. I found this to be easier, with a better result:

  • extract the pdf page(s) with pdftk
    • e.g.: pdftk file.pdf cat 3 output page3.pdf
  • open (import) that pdf with GIMP
    • important: change the import Resolution from 100 to 300 or 600 pixel/in
  • in GIMP export as PNG (change file extension to .png)

Edit:

Added picture, as requested in the Comments. Convert command used:

convert -density 300 -trim struct2vec.pdf -quality 100 struct2vec.png

GIMP : imported at 300 dpi (px/in); exported as PNG compression level 3.

I have not used GIMP on the command line (re: my comment, below).

pdf2png

enter image description here

3
votes

One more suggestion is that you can use GIMP.

Just load the PDF file in GIMP->save as .xcf and then you can do whatever you want to the image.

2
votes

I have used pdf2image. A simple python library that works like charm.

First install poppler on non linux machine. You can just download the zip. Unzip in Program Files and add bin to Machine Path.

After that you can use pdf2image in python class like this:

from pdf2image import convert_from_path, convert_from_bytes
images_from_path = convert_from_path(
   inputfile,
   output_folder=outputpath,
   grayscale=True, fmt='jpeg')

I am not good with python but was able to make exe of it. Later you may use the exe with file input and output parameter. I have used it in C# and things are working fine.

Image quality is good. OCR works fine.

1
votes

I use icepdf an open source java pdf engine. Check the office demo.

package image2pdf;

import org.icepdf.core.exceptions.PDFException;
import org.icepdf.core.exceptions.PDFSecurityException;
import org.icepdf.core.pobjects.Document;
import org.icepdf.core.pobjects.Page;
import org.icepdf.core.util.GraphicsRenderingHints;
import javax.imageio.ImageIO;
import java.awt.image.BufferedImage;
import java.awt.image.RenderedImage;
import java.io.File;
import java.io.FileNotFoundException;
import java.io.IOException;

public class pdf2image {

   public static void main(String[] args) {

      Document document = new Document();
      try {
         document.setFile("C:\\Users\\Dell\\Desktop\\test.pdf");
      } catch (PDFException ex) {
         System.out.println("Error parsing PDF document " + ex);
      } catch (PDFSecurityException ex) {
         System.out.println("Error encryption not supported " + ex);
      } catch (FileNotFoundException ex) {
         System.out.println("Error file not found " + ex);
      } catch (IOException ex) {
         System.out.println("Error IOException " + ex);
      }

      // save page captures to file.
      float scale = 1.0f;
      float rotation = 0f;

      // Paint each pages content to an image and
      // write the image to file
      for (int i = 0; i < document.getNumberOfPages(); i++) {
         try {
         BufferedImage image = (BufferedImage) document.getPageImage(
             i, GraphicsRenderingHints.PRINT, Page.BOUNDARY_CROPBOX, rotation, scale);

         RenderedImage rendImage = image;
         try {
            System.out.println(" capturing page " + i);
            File file = new File("C:\\Users\\Dell\\Desktop\\test_imageCapture1_" + i + ".png");
            ImageIO.write(rendImage, "png", file);
         } catch (IOException e) {
            e.printStackTrace();
         }
         image.flush();
         }catch(Exception e){
             e.printStackTrace();
         }
      }

      // clean up resources
      document.dispose();
   }
}

I've also tried imagemagick and pdftoppm, both pdftoppm and icepdf has a high resolution than imagemagick.

1
votes

Please take note before down voting, this solution is for Gimp using a graphical interface, and not for ImageMagick using a command line, but it worked perfectly fine for me as an alternative, and that is why I found it needful to share here.

Follow these simple steps to extract images in any format from PDF documents

  1. Download GIMP Image Manipulation Program
  2. Open the Program after installation
  3. Open the PDF document that you want to extract Images
  4. Select only the pages of the PDF document that you would want to extract images from. N/B: If you need only the cover images, select only the first page.
  5. Click open after selecting the pages that you want to extract images from
  6. Click on File menu when GIMP when the pages open
  7. Select Export as in the File menu
  8. Select your preferred file type by extension (say png) below the dialog box that pops up.
  9. Click on Export to export your image to your desired location.
  10. You can then check your file explorer for the exported image.

That's all.

I hope this helps

0
votes

PNG file you attached looks really blurred. In case if you need to use additional post-processing for each image you generated as PDF preview, you will decrease performance of your solution.

2JPEG can convert PDF file you attached to a nice sharpen JPG and crop empty margins in one call:

2jpeg.exe -src "C:\In\*.*" -dst "C:\Out" -oper Crop method:autocrop
0
votes

Use this commandline:

convert -geometry 3600x3600 -density 300x300 -quality 100 TEAM\ 4.pdf team4.png

This should correctly convert the file as you've asked for.

0
votes

The following python script will work on any Mac (Snow Leopard and upward). It can be used on the command line with successive PDF files as arguments, or you can put in into a Run Shell Script action in Automator, and make a Service (Quick Action in Mojave).

You can set the resolution of the output image in the script.

The script and a Quick Action can be downloaded from github.

#!/usr/bin/python
# coding: utf-8

import os, sys
import Quartz as Quartz
from LaunchServices import (kUTTypeJPEG, kUTTypeTIFF, kUTTypePNG, kCFAllocatorDefault) 

resolution = 300.0 #dpi
scale = resolution/72.0

cs = Quartz.CGColorSpaceCreateWithName(Quartz.kCGColorSpaceSRGB)
whiteColor = Quartz.CGColorCreate(cs, (1, 1, 1, 1))
# Options: kCGImageAlphaNoneSkipLast (no trans), kCGImageAlphaPremultipliedLast 
transparency = Quartz.kCGImageAlphaNoneSkipLast

#Save image to file
def writeImage (image, url, type, options):
    destination = Quartz.CGImageDestinationCreateWithURL(url, type, 1, None)
    Quartz.CGImageDestinationAddImage(destination, image, options)
    Quartz.CGImageDestinationFinalize(destination)
    return

def getFilename(filepath):
    i=0
    newName = filepath
    while os.path.exists(newName):
        i += 1
        newName = filepath + " %02d"%i
    return newName

if __name__ == '__main__':

    for filename in sys.argv[1:]:
        pdf = Quartz.CGPDFDocumentCreateWithProvider(Quartz.CGDataProviderCreateWithFilename(filename))
        numPages = Quartz.CGPDFDocumentGetNumberOfPages(pdf)
        shortName = os.path.splitext(filename)[0]
        prefix = os.path.splitext(os.path.basename(filename))[0]
        folderName = getFilename(shortName)
        try:
            os.mkdir(folderName)
        except:
            print "Can't create directory '%s'"%(folderName)
            sys.exit()

        # For each page, create a file
        for i in range (1, numPages+1):
            page = Quartz.CGPDFDocumentGetPage(pdf, i)
            if page:
        #Get mediabox
                mediaBox = Quartz.CGPDFPageGetBoxRect(page, Quartz.kCGPDFMediaBox)
                x = Quartz.CGRectGetWidth(mediaBox)
                y = Quartz.CGRectGetHeight(mediaBox)
                x *= scale
                y *= scale
                r = Quartz.CGRectMake(0,0,x, y)
        # Create a Bitmap Context, draw a white background and add the PDF
                writeContext = Quartz.CGBitmapContextCreate(None, int(x), int(y), 8, 0, cs, transparency)
                Quartz.CGContextSaveGState (writeContext)
                Quartz.CGContextScaleCTM(writeContext, scale,scale)
                Quartz.CGContextSetFillColorWithColor(writeContext, whiteColor)
                Quartz.CGContextFillRect(writeContext, r)
                Quartz.CGContextDrawPDFPage(writeContext, page)
                Quartz.CGContextRestoreGState(writeContext)
        # Convert to an "Image"
                image = Quartz.CGBitmapContextCreateImage(writeContext) 
        # Create unique filename per page
                outFile = folderName +"/" + prefix + " %03d.png"%i
                url = Quartz.CFURLCreateFromFileSystemRepresentation(kCFAllocatorDefault, outFile, len(outFile), False)
        # kUTTypeJPEG, kUTTypeTIFF, kUTTypePNG
                type = kUTTypePNG
        # See the full range of image properties on Apple's developer pages.
                options = {
                    Quartz.kCGImagePropertyDPIHeight: resolution,
                    Quartz.kCGImagePropertyDPIWidth: resolution
                    }
                writeImage (image, url, type, options)
                del page
0
votes

You can do it in LibreOffice Draw (which is usually preinstalled in Ubuntu):

  1. Open PDF file in LibreOffice Draw.
  2. Scroll to the page you need.
  3. Make sure text/image elements are placed correctly. If not, you can adjust/edit them on the page.
  4. Top menu: File > Export...
  5. Select the image format you need in the bottom-right menu. I recommend PNG.
  6. Name your file and click Save.
  7. Options window will appear, so you can adjust resolution and size.
  8. Click OK, and you are done.
0
votes

get Image from Pdf in iOS Swift Best solution

func imageFromPdf(pdfUrl : URL,atIndex index : Int, closure:@escaping((UIImage)->Void)){
    
    autoreleasepool {
        
        // Instantiate a `CGPDFDocument` from the PDF file's URL.
        guard let document = PDFDocument(url: pdfUrl) else { return }
        
        // Get the first page of the PDF document.
        guard let page = document.page(at: index) else { return }
        
        // Fetch the page rect for the page we want to render.
        let pageRect = page.bounds(for: .mediaBox)
        
        let renderer = UIGraphicsImageRenderer(size: pageRect.size)
        let img = renderer.image { ctx in
            // Set and fill the background color.
            UIColor.white.set()
            ctx.fill(CGRect(x: 0, y: 0, width: pageRect.width, height: pageRect.height))
            
            // Translate the context so that we only draw the `cropRect`.
            ctx.cgContext.translateBy(x: -pageRect.origin.x, y: pageRect.size.height - pageRect.origin.y)
            
            // Flip the context vertically because the Core Graphics coordinate system starts from the bottom.
            ctx.cgContext.scaleBy(x: 1.0, y: -1.0)
            
            // Draw the PDF page.
            page.draw(with: .mediaBox, to: ctx.cgContext)
        }
        closure(img)

    }
    
    
}
-1
votes

It's actually pretty easy to do with Preview on a mac. All you have to do is open the file in Preview and save-as (or export) a png or jpeg but make sure that you use at least 300 dpi at the bottom of the window to get a high quality image.