Xcode 9 Autocomplete Not Working 100% - Partially Working

Question

This morning, Xcode 9.0 (9A235) shows a new/strange Auto Complete box that is not at all what it used to be. How do I get the full auto-complete box so that autocomplete looks like how it usually does?

Answer 1

Try:

1. Go to Xcode > Preferences > Text Editing
2. Under Code completion - Uncheck 'Suggest completions while typing'
3. Quit out of Xcode and then relaunch Xcode.
4. Go to Xcode > Preferences > Text Editing again
5. Quit out of Xcode and then relaunch Xcode.
6. Now go to Code completion and check 'Suggest completions while typing'.
7. Try typing library function or enum and enjoy!

Answer 2

Deleting the DERIVED DATA folder seemed to fix my issue. Thanks to this post: swift println() not showing autocomplete options while writting code

Answer 3

Things to try: #1 Run this command in the project directory if you use cocoapods:

rm -rf ~/Library/Caches/CocoaPods;
rm -rf Pods; rm -rf ~/Library/Developer/Xcode/DerivedData/*;
pod deintegrate; pod setup; pod install;

Clean the Project -> Cmd+Shift+K

Clean the Build Folder -> Cmd+Shift+Option+K

If you skipped step one:
Delete Derived Data
Xcode Preferences -> Locations ->
Arrow Symbol Takes you to DerrivedData -> Delete Folder

Every .swift and .m file in the project should be in this list or it won't autocomplete in those files.

Use fileprivate* on every class property and function that you can to reduce the scope of the Compilers work per item.

Write modular/OOP code so you have less code for the compiler to read.

Avoid using Type Inferance when the result is a complex calculation, and try to break down complex calculations into let this = smallerOperation statements

* In Swift 4 private became stricter than fileprivate

---

In Xcode 12 there have been significant improvements in how often deleting derived data is necessary (though freezing has increased).

Answer 4

Xcode Version 11.0 (11A420a)

I have tried the solution from Lal Krishna for Xcode V11.0. It worked a few times but later I got no result.

I found one solution. You must delete two files:

1. Library/Developer/Xcode/Derived Data (as described before)
2. Library/Developer/Xcode/UserData/IDEEditorInteractivityHistory

That solution helps me now. May be useful for others 😉

Answer 5

This can happen when the file is not a member of the Target. Open the file where autocomplete is not working and show the the "Utilities" tab in the top right of Xcode (blue in the screenshot below).

Ensure your Target (typically your app's name) is checked. Autocomplete should work almost instantly without restarting Xcode, cleaning, or deleting Derived Data.

If it is already checked, make sure to uncheck and recheck it again. For me, it did the trick.

Answer 6

I'm using Xcode 10.2 and I had the same issue.

This answer from axel helped me to fix.

Anyway, I'm going to describe a bit more:

1. Go to YourProject.xcodeproj by clicking with Right Mouse Click and open Show Package Contents
2. Go to xcuserdata and delete your youruser.xcuserdatad

If you have also the xcworkspace(if you already have any pods installed) then do step 3&4, if not then just skip step 3&4:

3. Go to YourProject.xcworkspace by clicking with Right Mouse Click and open Show Package Contents

4. Go to xcuserdata and delete your youruser.xcuserdatad

5. Quit Xcode

6. Delete Derived Data by using Terminal:

rm -rf ~/Library/Developer/Xcode/DerivedData

7. Open Xcode and check if it works.

Answer 7

This can also happen if you redundantly named your files. For example,

Data.swift

Data.swift

Answer 8

Here's a bit of workaround but works.

1. Clean the project... Command + Shift + K

2. Clean the build folder... Command + Shift + Options(Alt) + K

3. Delete derived data for the project... This can be done with the help of this link:

   How can I delete derived data in Xcode 9?

4. Close XCode.

5. Reopen XCode (let the indexing complete) and Build the project... Command + B

Once it will be done with building, The suggestions will be back. I have tried it twice.

Update:

Sometimes the issue can be as simple as Duplicate file names. Carefully check if any new file names added by you are conflicting with older files.

In Xcode 11.4, even if you move an existing file to another group, the suggestions disappear. This can be cured simply by restarting Xcode.

Answer 9

Removing the file from the Test Targets fixed my problem.

Answer 10

After a long time of searching, I finally fixed the issue for me. In Xcode > Preferences > Text Editing, in "Code Completion", I had "Use Escape key to show completion suggestions" checked for some reason. As soon as I unchecked this box, auto completion worked like a charm, without even needing to restart Xcode! (Xcode 10)

Answer 11

Please try doing this:

Select the file >> check if the file is added to UITesting or UnitTesting targets (File inspector -> Target Membership). If so, please uncheck those two and make sure only the project target is selected. Then build and try if autocomplete is working fine.

This worked for me. Hope it help someone.

Answer 12

For Xcode 11.4 (11E146)

Back Slash in folder name breaking the autocompletion feature, If this is the case remove it and build again.

Answer 13

I added here what was going on in my project just in case it can help someone else... I had 2 files with the same name and I didn't realise.

Answer 14

Just lost a day trying to solve the autocomplete nightmare of Xcode (9.2). Deleting derived data seemed to work briefly then things reverted. Reboots etc and other suggested voodoo failed to make a difference.

I gave up and download the 30 day trial of AppCode from Jet Brains. Autocomplete worked fine there and this maybe coincidence but it then started working again in my project in Xcode. Can't guarantee that it'll keep working...

Answer 15

It seems to be file specific in my case (Xcode 9.2) For me the fix was:

1. Delete problem file (remove reference)
2. Clean and Build
3. Add file back into the project (I did not check test targets)
4. Build again

Finally after 3 hours of trying everything - autocomplete works as it should.

Answer 16

Problems mostly because there are missing location of some files in project navigator (build errors)

1. Press command+1 to open Project Navigator pane
2. Check if there are any missing files

Or you can:

1. Delete DerivedData (command+shift+K)
2. Clean build folder (command+shift+option+K)
3. Press build again (command+B)
4. You should see build error that Xcode could not find some files that prevent build tool to process auto complete.
5. Correct and fix any missing files that you see.

Hope this helps

Answer 17

Use Command + B
or Command + R to Build or Run the project
Xcode sometimes messes up ;)

Answer 18

Xcode 11.3, macOS catalina

process parsecd achieve 100% of cpu, so kill it helps me

Answer 19

goto underneath directory and delete all folders on it.

{Your User}/Library/Developer/Xcode/DeriveData

It worked for me.

Answer 20

For me it was happening in my test file, because it wasn't part of a target for some reason. Setting it's target membership solved the issue.

Answer 21

For me, the problem occured when I discarded all the changes of one file (under Source Control > Commit), which effectively deleted the file. This is what I wanted and I thought that the file and all references to it would be delted too.

However, there was still a reference to the file (shown in red) in the Project navigator. Deleting the (now non-existant) file in the Project navigator magically brought auto-completion back.

No amount of cleaning, deleting derived data, etc helped. I only realized the deleted file was still showing when I tried to build my project, which of course failed because it couldnt find that file.

Hope this will help someone save 30 minutes :)

Answer 22

1. check whether you selected the Suggest completions while typing in Xcode -> Preferences -> Text Editing
2. navigate to user->Library->Developer->Xcode->DerivedData in Finder and delete the DerivedData folder

Answer 23

My case might appear too specific to help, but it might give someone an idea of how to solve broken auto-completion. Xcode 10.2.1.

In my case, auto-complete stopped working entirely and non of these other answers helped me. In addition, the fan on the computer could be heard to go louder indicating something was overworking (no other apps running), it should be noted I was editing on a MacBook Pro laptop. It seemed to be linked with the editor struggling to parse the equation I'd written:

switch mtype {
    case .indeterminate:
      newPosition.x = (frame.width - mainFigureText.frame.width) / 2
    case .right:
      newPosition.x = (((frame.width / 2) - mainFigureText.frame.width) / 2) + (frame.width / 2)
    case .left:
      newPosition.x = (((frame.width / 2) - mainFigureText.frame.width) / 2)
 }

I was looking to animate a text view left, right, or to the middle depending on user prefs. The newPosition is a CGPoint that the text will animate to. Anyway, I split the equations up and all of a sudden auto-complete started working and the fan went quiet! I've been able to recreate this specific problem more than once by re-typing the above code and then replacing it with:

let halfFrameWidth: CGFloat = frame.width / 2
let middleLeft = (halfFrameWidth - mainFigureText.frame.width) / 2

switch doseType {
    case .right:
      newPosition.x = middleLeft + halfFrameWidth
    case .left:
      newPosition.x = middleLeft
    default:
      newPosition.x = (frame.width - mainFigureText.frame.width) / 2
 }

Answer 24

I would like to add one more to the pile of solutions, because it is the only one that worked for me and is nowhere to be found here.

Xcode normally comes with two default build configuration for every project. Release & Debug. I have an extra one for my unit tests called Testing. In Xcode 10.1, 10.2, 10.3 and 11 beta, the new build system does not seem to like it and will only auto-complete if you either use Release or Debug. Any custom build configuration breaks auto-completion in mixed (swift + objc) project with unit tests.

Answer 25

I faced the same problem in Xcode 11.3.1. In my case The issue was cause due to duplicate file names / Deleted file name. Better to run the application once and check whether there are any deleted files/classes so that you will get a syntax error.

Answer 26

This Link helped me. Open the Build Settings & fill the framework search paths. See the below image.

Answer 27

Build errors can break the autocompletion feature in Xcode.

Answer 28

I had the issue with 100% not working auto-complete, none of written here helped. One thing I noticed – it was broken right after adding some entities into .xcdatamodel file, which have codegen class definition by default.

So I wasn't surprised when using old-style codegen none (and generating classes of course) fixed the issue immediately, even without restarting the xcode.

Answer 29

With Xcode 11.1, simply performing Clean Build Folder or deleting derived data was not enough to fix autocomplete.

Only after restarting my Mac, everything was back to normal

Answer 30

If you have issue with weird completion/auto-completion/intellisense (not showing default stuff like delegates and datasource protocols methods) just change your target (e.g. from simulator iPhone 8 to real device), build the project and switch back to your original target.

Similar with issues with Interface Builder (storyboards) not showing anything, but only "nothing selected" whenever you select any part of the view. Just switch to other Xib/Storyboard (or even create new), check if it works there and switch back.

These workarounds worked for me in both cases (had both issues in one day with one project on Xcode 10.2.1). From what I've seen all over internet forums it seems these are bugs never fixed since Xcode 6.x or so.

Cheers!