I have problem booting Linux 3.16.1. I have compiled sources from http://www.kernel.org with at91sam9263_defconfig.
I have added Flattened Device Tree support in Boot options. Followin tips suggested in this (https://www.slideshare.net/softpapa/device-tree-support-on-arm-linux-8930303) presentation to turn on Support device tree in /proc but i don't have that option in menuconfig.
I have U-Boot bootloader version 2014.10rc2 which supports device tree. I have generated dtb from script shipped with kernel: make at91sam9263ek.dtb
And now i'm getting this error:
Welcome to minicom 2.5 OPTIONS: I18n Compiled on Feb 9 2011, 14:45:00. Port /dev/ttyS0 Press CTRL-A Z for help on special keys RomBOOT > U-Boot 2014.10-rc2-00200-g9170818-dirty (Sep 23 2014 - 15:16:39) CPU: AT91SAM9263 Crystal frequency: 16.368 MHz CPU clock : 199.919 MHz Master clock : 99.960 MHz DRAM: 64 MiB WARNING: Caches not enabled NAND: 256 MiB MMC: mci: 0 In: serial Out: serial Err: serial Net: macb0 Warning: Your board does not use generic board. Please read doc/README.generic-board and take action. Boards not upgraded by the late 2014 may break or be removed. Hit any key to stop autoboot: 0 U-Boot> tftp uImage macb0: Starting autonegotiation... macb0: Autonegotiation complete macb0: link up, 100Mbps full-duplex (lpa: 0xcde1) Using macb0 device TFTP from server 192.168.1.247; our IP address is 192.168.1.240 Filename 'uImage'. Load address: 0x22000000 Loading: ################################################################# ################################################################# ################################################################# ############## 1.2 MiB/s done Bytes transferred = 3068016 (2ed070 hex) U-Boot> tftp 20000000 dt macb0: link up, 100Mbps full-duplex (lpa: 0xcde1) Using macb0 device TFTP from server 192.168.1.247; our IP address is 192.168.1.240 Filename 'dt'. Load address: 0x20000000 Loading: # 340.8 KiB/s done Bytes transferred = 13279 (33df hex) U-Boot> bootm 22000000 - 20000000 ## Booting kernel from Legacy Image at 22000000 ... Image Name: Linux-3.16.1 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3067952 Bytes = 2.9 MiB Load Address: 20008000 Entry Point: 20008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 20000000 Booting using the fdt blob at 0x20000000 Loading Kernel Image ... OK Loading Device Tree to 23ea3000, end 23ea93de ... OK Starting kernel ... Uncompressing Linux... done, booting the kernel. Error: unrecognized/unsupported device tree compatible list: [ 'atmel,at91sam9263ek' 'atmel,at91sam9263' 'atmel,at91sam9' ] Available machine support: ID (hex) NAME 000004b2 Atmel AT91SAM9263-EK Please check your kernel config and/or bootloader.
