4600
votes

I have a repo (origin) on a USB key that I cloned on my hard drive (local). I moved "origin" to a NAS and successfully tested cloning it from here.

I would like to know if I can change the URI of "origin" in the settings of "local" so it will now pull from the NAS, and not from the USB key.

For now, I can see two solutions:

  • push everything to the usb-orign, and copy it to the NAS again (implies a lot of work due to new commits to nas-origin);

  • add a new remote to "local" and delete the old one (I fear I'll break my history).

29
I had to do this on an old version of git (1.5.6.5) and the set-url option did not exist. Simply deleting the unwanted remote and adding a new one with the same name worked without problem and maintained history just fine.HotN
in my case i need to check my permission i have two private git repositories and this second account is admin of that new repo and first one is my default user account and i should grant permission to firstsaber tabatabaee yazdi

29 Answers

7528
votes

You can

git remote set-url origin new.git.url/here

(see git help remote) or you can edit .git/config and change the URLs there. You're not in any danger of losing history unless you do something very silly (and if you're worried, just make a copy of your repo, since your repo is your history.)

1162
votes
git remote -v
# View existing remotes
# origin  https://github.com/user/repo.git (fetch)
# origin  https://github.com/user/repo.git (push)

git remote set-url origin https://github.com/user/repo2.git
# Change the 'origin' remote's URL

git remote -v
# Verify new remote URL
# origin  https://github.com/user/repo2.git (fetch)
# origin  https://github.com/user/repo2.git (push)

Changing a remote's URL

111
votes

Change Host for a Git Origin Server

from: http://pseudofish.com/blog/2010/06/28/change-host-for-a-git-origin-server/

Hopefully this isn’t something you need to do. The server that I’ve been using to collaborate on a few git projects with had the domain name expire. This meant finding a way of migrating the local repositories to get back in sync.

Update: Thanks to @mawolf for pointing out there is an easy way with recent git versions (post Feb, 2010):

git remote set-url origin ssh://newhost.com/usr/local/gitroot/myproject.git

See the man page for details.

If you’re on an older version, then try this:

As a caveat, this works only as it is the same server, just with different names.

Assuming that the new hostname is newhost.com, and the old one was oldhost.com, the change is quite simple.

Edit the .git/config file in your working directory. You should see something like:

[remote "origin"]
fetch = +refs/heads/*:refs/remotes/origin/*
url = ssh://oldhost.com/usr/local/gitroot/myproject.git

Change oldhost.com to newhost.com, save the file and you’re done.

From my limited testing (git pull origin; git push origin; gitx) everything seems in order. And yes, I know it is bad form to mess with git internals.

63
votes
git remote set-url origin git://new.location

(alternatively, open .git/config, look for [remote "origin"], and edit the url = line.

You can check it worked by examining the remotes:

git remote -v
# origin  git://new.location (fetch)
# origin  git://new.location (push)

Next time you push, you'll have to specify the new upstream branch, e.g.:

git push -u origin master

See also: GitHub: Changing a remote's URL

56
votes

Switching remote URLs

Open Terminal.

Ist Step:- Change the current working directory to your local project.

2nd Step:- List your existing remotes in order to get the name of the remote you want to change.

git remote -v

origin  https://github.com/USERNAME/REPOSITORY.git (fetch)

origin  https://github.com/USERNAME/REPOSITORY.git (push)

Change your remote's URL from HTTPS to SSH with the git remote set-url command.

3rd Step:- git remote set-url origin [email protected]:USERNAME/REPOSITORY.git

4th Step:- Now Verify that the remote URL has changed.

git remote -v Verify new remote URL

origin  [email protected]:USERNAME/REPOSITORY.git (fetch)
origin  [email protected]:USERNAME/REPOSITORY.git (push)
32
votes
  1. remove origin using command on gitbash git remote rm origin
  2. And now add new Origin using gitbash git remote add origin (Copy HTTP URL from your project repository in bit bucket) done
32
votes

As seen here,

$ git remote rm origin
$ git remote add origin [email protected]:aplikacjainfo/proj1.git
$ git config master.remote origin
$ git config master.merge refs/heads/master
25
votes

Write the below command from your repo terminal:

git remote set-url origin [email protected]:<username>/<repo>.git

Refer this link for more details about changing the url in the remote.

20
votes

git remote set-url {name} {url}

ex) git remote set-url origin https://github.com/myName/GitTest.git

19
votes

if you cloned your local will automatically consist,

remote URL where it gets cloned.

you can check it using git remote -v

if you want to made change in it,

git remote set-url origin https://github.io/my_repo.git

here,

origin - your branch

if you want to overwrite existing branch you can still use it.. it will override your existing ... it will do,

git remote remove url
and 
git remote add origin url

for you...

18
votes

To check git remote connection:

git remote -v

Now, set the local repository to remote git:

git remote set-url origin https://NewRepoLink.git

Now to make it upstream or push use following code:

git push --set-upstream origin master -f

17
votes

I worked:

git remote set-url origin <project>
16
votes

enter image description here

Troubleshooting :

You may encounter these errors when trying to changing a remote. No such remote '[name]'

This error means that the remote you tried to change doesn't exist:

git remote set-url sofake https://github.com/octocat/Spoon-Knife fatal: No such remote 'sofake'

Check that you've correctly typed the remote name.

Reference : https://help.github.com/articles/changing-a-remote-s-url/

15
votes

In the Git Bash, enter the command:

git remote set-url origin https://NewRepoLink.git

Enter the Credentials

Done

15
votes

Change remote git URI to [email protected] rather than https://github.com

git remote set-url origin [email protected]:<username>/<repo>.git

Example:

git remote set-url origin [email protected]:Chetabahana/my_repo_name.git

The benefit is that you may do git push automatically when you use ssh-agent :

#!/bin/bash

# Check ssh connection
ssh-add -l &>/dev/null
[[ "$?" == 2 ]] && eval `ssh-agent`
ssh-add -l &>/dev/null
[[ "$?" == 1 ]] && expect $HOME/.ssh/agent

# Send git commands to push
git add . && git commit -m "your commit" && git push -u origin master

Put a script file $HOME/.ssh/agent to let it runs ssh-add using expect as below:

#!/usr/bin/expect -f
set HOME $env(HOME)
spawn ssh-add $HOME/.ssh/id_rsa
expect "Enter passphrase for $HOME/.ssh/id_rsa:"
send "<my_passphrase>\n";
expect "Identity added: $HOME/.ssh/id_rsa ($HOME/.ssh/id_rsa)"
interact
15
votes

Navigate to the project root of the local repository and check for existing remotes:

git remote -v

If your repository is using SSH you will see something like:

> origin  [email protected]:USERNAME/REPOSITORY.git (fetch)
> origin  [email protected]:USERNAME/REPOSITORY.git (push)

And if your repository is using HTTPS you will see something like:

> origin  https://github.com/USERNAME/REPOSITORY.git (fetch)
> origin  https://github.com/USERNAME/REPOSITORY.git (push)

Changing the URL is done with git remote set-url. Depending on the output of git remote -v, you can change the URL in the following manner:

In case of SSH, you can change the URL from REPOSITORY.git to NEW_REPOSITORY.git like:

$ git remote set-url origin [email protected]:USERNAME/NEW_REPOSITORY.git

And in case of HTTPS, you can change the URL from REPOSITORY.git to NEW_REPOSITORY.git like:

$ git remote set-url origin https://github.com/USERNAME/NEW_REPOSITORY.git

NOTE: If you've changed your GitHub username, you can follow the same process as above to update the change in the username associated with your repository. You would only have to update the USERNAME in the git remote set-url command.

14
votes

You have a lot of ways to do that:

Console

git remote set-url origin [Here new url] 

Just be sure that you've opened it in a place where a repository is.

Config

It is placed in .git/config (same folder as repository)

[core]
    repositoryformatversion = 0
    filemode = false
    bare = false
    logallrefupdates = true
    symlinks = false
    ignorecase = true
[remote "origin"]
    url = [Here new url]  <------------------------------------
...

TortoiseGit

Step 1 - open settings

Step 2 - change url

Then just edit URL.

SourceTree

  1. Click on the "Settings" button on the toolbar to open the Repository Settings window.

  2. Click "Add" to add a remote repository path to the repository. A "Remote details" window will open.

  3. Enter a name for the remote path.

  4. Enter the URL/Path for the remote repository

  5. Enter the username for the hosting service for the remote repository.

  6. Click 'OK' to add the remote path.

  7. Back on the Repository Settings window, click 'OK'. The new remote path should be added on the repository now.

  8. If you need to edit an already added remote path, just click the 'Edit' button. You should be directed to the "Remote details" window where you can edit the details (URL/Path/Host Type) of the remote path.

  9. To remove a remote repository path, click the 'Remove' button

enter image description here

enter image description here

ref. Support

10
votes

To change the remote upstream: git remote set-url origin <url>


To add more upstreams: git remote add newplace <url>

So you can choose where to work git push origin <branch> or git push newplace <branch>

7
votes

If you're using TortoiseGit then follow the below steps:

  1. Go to your local checkout folder and right click to go to TortoiseGit -> Settings
  2. In the left pane choose Git -> Remote
  3. In the right pane choose origin
  4. Now change the URL text box value to where ever your new remote repository is

Your branch and all your local commits will remain intact and you can keep working as you were before.

7
votes

An alternative approach is to rename the 'old' origin (in the example below I name it simply old-origin) and adding a new one. This might be the desired approach if you still want to be able to push to the old origin every now and then:

git remote rename origin old-origin
git remote add origin [email protected]>:<username>/<projectname>.git

And in case you need to push your local state to the new origin:

git push -u origin --all
git push -u origin --tags
6
votes

You can change the url by editing the config file. Go to your project root:

nano .git/config

Then edit the url field and set your new url. Save the changes. You can verify the changes by using the command.

git remote -v 
6
votes

For me, the accepted answer worked only in the case of fetch but not pull. I did the following to make it work for push as well.

git remote set-url --push origin new.git.url/here

So to update the fetch URL:

git remote set-url origin new.git.url/here

To update the pull URL:

git remote set-url --push origin new.git.url/here
4
votes

Removing a remote

Use the git remote rm command to remove a remote URL from your repository.

    $ git remote -v
    # View current remotes
    > origin  https://github.com/OWNER/REPOSITORY.git (fetch)
    > origin  https://github.com/OWNER/REPOSITORY.git (push)
    > destination  https://github.com/FORKER/REPOSITORY.git (fetch)
    > destination  https://github.com/FORKER/REPOSITORY.git (push)

    $ git remote rm destination
    # Remove remote
    $ git remote -v
    # Verify it's gone
    > origin  https://github.com/OWNER/REPOSITORY.git (fetch)
    > origin  https://github.com/OWNER/REPOSITORY.git (push)
1
votes

check your privilege

in my case i need to check my username

i have two or three repository with seperate credentials.

problem is my permission i have two private git server and repositories

this second account is admin of that new repo and first one is my default user account and i should grant permission to first

1
votes

If you would like to set the username and password as well in the origin url, you can follow the below steps.

Exporting the password in a variable would avoid issues with special characters.

Steps:

export gituser='<Username>:<password>@'
git remote set-url origin https://${gituser}<gitlab_repo_url> 
git push origin <Branch Name>
0
votes

For those who want to make this change from Visual Studio 2019

Open Team Explorer (Ctrl+M)

Home -> Settings

Git -> Repository Settings

Remotes -> Edit

enter image description here

0
votes

If your repository is private then

  1. Open Control Panel from the Start menu
  2. Select User Accounts
  3. Select "Manage your credentials" in the left hand menu
  4. Delete any credentials related to Git or GitHub

Reference

0
votes

(Only Windows PS) To change a server/protocol recursively in all local repos

Get-ChildItem -Directory -Recurse -Depth [Number] -Hidden -name | %{$_.replace("\.git","")} | %{git -C $_ remote set-url origin $(git -C $_ remote get-url origin).replace("[OLD SERVER]", "[NEW SERVER]")}
0
votes

If your on linux/Mac with Sed/grep its also pretty easy to change without losing associations.

Recently did this to change my username for all my repos locally in config but done the same approach for remotes lines entirely too.

VARIABLE_FIND='old'; VARIABLE_REPLACE='new'; path_name='~/PycharmProjects/*/.git/'; grep -rl --include=config "${VARIABLE_FIND}" "${path_name}" | xargs sed -i "s|${VARIABLE_FIND}|${VARIABLE_REPLACE}|g"

For replacing whole line where there is a match you can do this.

VARIABLE_FIND='someneedle'; VARIABLE_REPLACE='somenewvalue'; path_name='/home/*/' grep -rl --include=config "${VARIABLE_FIND}" "${path_name}" | xargs sed -i "/${VARIABLE_FIND//\//\\/}/c\\${VARIABLE_REPLACE}" ;

Reference: Replace whole line containing a string using Sed