floating point - How do you round UP a number in Python?

Question

If we need to roundUP 2.3 to 3 or 2.9 to 3 then you can try this

a = int(input("enter a: "))

b = int(input("enter b: "))

spel_round = 0

if a%b == 0:
    spel_round = a/b # a = 6 and b = 3 then a/b = 3
else:
    spel_round = a//b+1  # a = 7 and b = 3 a//b + [enter image description here][1]1 = 3

print(spel_round)  

Answer 1

The ceil (ceiling) function:

import math
print(int(math.ceil(4.2)))

Answer 2

I know this answer is for a question from a while back, but if you don't want to import math and you just want to round up, this works for me.

>>> int(21 / 5)
4
>>> int(21 / 5) + (21 % 5 > 0)
5

The first part becomes 4 and the second part evaluates to "True" if there is a remainder, which in addition True = 1; False = 0. So if there is no remainder, then it stays the same integer, but if there is a remainder it adds 1.

Answer 3

Interesting Python 2.x issue to keep in mind:

>>> import math
>>> math.ceil(4500/1000)
4.0
>>> math.ceil(4500/1000.0)
5.0

The problem is that dividing two ints in python produces another int and that's truncated before the ceiling call. You have to make one value a float (or cast) to get a correct result.

In javascript, the exact same code produces a different result:

console.log(Math.ceil(4500/1000));
5

Answer 4

If working with integers, one way of rounding up is to take advantage of the fact that // rounds down: Just do the division on the negative number, then negate the answer. No import, floating point, or conditional needed.

rounded_up = -(-numerator // denominator)

For example:

>>> print(-(-101 // 5))
21

Answer 5

You might also like numpy:

>>> import numpy as np
>>> np.ceil(2.3)
3.0

I'm not saying it's better than math, but if you were already using numpy for other purposes, you can keep your code consistent.

Anyway, just a detail I came across. I use numpy a lot and was surprised it didn't get mentioned, but of course the accepted answer works perfectly fine.

Answer 6

Use math.ceil to round up:

>>> import math
>>> math.ceil(5.4)
6.0

NOTE: The input should be float.

If you need an integer, call int to convert it:

>>> int(math.ceil(5.4))
6

BTW, use math.floor to round down and round to round to nearest integer.

>>> math.floor(4.4), math.floor(4.5), math.floor(5.4), math.floor(5.5)
(4.0, 4.0, 5.0, 5.0)
>>> round(4.4), round(4.5), round(5.4), round(5.5)
(4.0, 5.0, 5.0, 6.0)
>>> math.ceil(4.4), math.ceil(4.5), math.ceil(5.4), math.ceil(5.5)
(5.0, 5.0, 6.0, 6.0)

Answer 7

I am surprised nobody suggested

(numerator + denominator - 1) // denominator

for integer division with rounding up. Used to be the common way for C/C++/CUDA (cf. divup)

Answer 8

The syntax may not be as pythonic as one might like, but it is a powerful library.

https://docs.python.org/2/library/decimal.html

from decimal import *
print(int(Decimal(2.3).quantize(Decimal('1.'), rounding=ROUND_UP)))

Answer 9

Try this:

a = 211.0
print(int(a) + ((int(a) - a) != 0))

Answer 10

For those who want to round up a / b and get integer:

Another variant using integer division is

def int_ceil(a, b):
    return (a - 1) // b + 1

>>> int_ceil(19, 5)
4
>>> int_ceil(20, 5)
4
>>> int_ceil(21, 5)
5

Answer 11

Be shure rounded value should be float

a = 8 
b = 21
print math.ceil(a / b)
>>> 0

but

print math.ceil(float(a) / b)
>>> 1.0

Answer 12

The above answers are correct, however, importing the math module just for this one function usually feels like a bit of an overkill for me. Luckily, there is another way to do it:

g = 7/5
g = int(g) + (not g.is_integer())

True and False are interpreted as 1 and 0 in a statement involving numbers in python. g.is_interger() basically translates to g.has_no_decimal() or g == int(g). So the last statement in English reads round g down and add one if g has decimal.

Answer 13

Without importing math // using basic envionment:

a) method / class method

def ceil(fl): 
  return int(fl) + (1 if fl-int(fl) else 0)

def ceil(self, fl): 
  return int(fl) + (1 if fl-int(fl) else 0)

b) lambda:

ceil = lambda fl:int(fl)+(1 if fl-int(fl) else 0)

Answer 14

>>> def roundup(number):
...     return round(number+.5)
>>> roundup(2.3)
3
>>> roundup(19.00000000001)
20

This function requires no modules.

Answer 15

In case anyone is looking to round up to a specific decimal place:

import math
def round_up(n, decimals=0):
    multiplier = 10 ** decimals
    return math.ceil(n * multiplier) / multiplier

Answer 16

I'm surprised I haven't seen this answer yet round(x + 0.4999), so I'm going to put it down. Note that this works with any Python version. Changes made to the Python rounding scheme has made things difficult. See this post.

Without importing, I use:

def roundUp(num):
    return round(num + 0.49)

testCases = list(x*0.1 for x in range(0, 50))

print(testCases)
for test in testCases:
    print("{:5.2f}  -> {:5.2f}".format(test, roundUp(test)))

Why this works

From the docs

For the built-in types supporting round(), values are rounded to the closest multiple of 10 to the power minus n; if two multiples are equally close, rounding is done toward the even choice

Therefore 2.5 gets rounded to 2 and 3.5 gets rounded to 4. If this was not the case then rounding up could be done by adding 0.5, but we want to avoid getting to the halfway point. So, if you add 0.4999 you will get close, but with enough margin to be rounded to what you would normally expect. Of course, this will fail if the x + 0.4999 is equal to [n].5000, but that is unlikely.

Answer 17

For those who doesn't want to use import.

For a given list or any number:

x = [2, 2.1, 2.5, 3, 3.1, 3.5, 2.499,2.4999999999, 3.4999999,3.99999999999]

You must first evaluate if the number is equal to its integer, which always rounds down. If the result is True, you return the number, if is not, return the integer(number) + 1.

w = lambda x: x if x == int(x) else int(x)+1
[w(i) for i in z]
>>> [2, 3, 3, 3, 4, 4, 3, 3, 4, 4]

Math logic:

• If the number has decimal part: round_up - round_down == 1, always.
• If the number doens't have decimal part: round_up - round_down == 0.

So:

• round_up == x + round_down

With:

• x == 1 if number != round_down
• x == 0 if number == round_down

You are cutting the number in 2 parts, the integer and decimal. If decimal isn't 0, you add 1.

PS:I explained this in details since some comments above asked for that and I'm still noob here, so I can't comment.

Answer 18

To do it without any import:

>>> round_up = lambda num: int(num + 1) if int(num) != num else int(num)
>>> round_up(2.0)
2
>>> round_up(2.1)
3

Answer 19

I know this is from quite a while back, but I found a quite interesting answer, so here goes:

-round(-x-0.5)

This fixes the edges cases and works for both positive and negative numbers, and doesn't require any function import

Cheers

Answer 20

You could use rond

cost_per_person = round(150 / 2, 2)

Answer 21

If you don't want to import anything, you can always write your own simple function as:

def RoundUP(num):
    if num== int(num):
        return num
    return int(num + 1)

Answer 22

You can use floor devision and add 1 to it. 2.3 // 2 + 1

Answer 23

when you operate 4500/1000 in python, result will be 4, because for default python asume as integer the result, logically: 4500/1000 = 4.5 --> int(4.5) = 4 and ceil of 4 obviouslly is 4

using 4500/1000.0 the result will be 4.5 and ceil of 4.5 --> 5

Using javascript you will recieve 4.5 as result of 4500/1000, because javascript asume only the result as "numeric type" and return a result directly as float

Good Luck!!

Answer 24

I'm basically a beginner at Python, but if you're just trying to round up instead of down why not do:

round(integer) + 1

Answer 25

I think you are confusing the working mechanisms between int() and round().

int() always truncates the decimal numbers if a floating number is given; whereas round(), in case of 2.5 where 2 and 3 are both within equal distance from 2.5, Python returns whichever that is more away from the 0 point.

round(2.5) = 3
int(2.5) = 2

Answer 26

My share

I have tested print(-(-101 // 5)) = 21 given example above.

Now for rounding up:

101 * 19% = 19.19

I can not use ** so I spread the multiply to division:

(-(-101 //(1/0.19))) = 20