Rails Scope returns all instead of nil

Question

I'm running into a strange issue creating a scope and using the first finder. It seems as though using first as part of the query in a scope will make it return all results if no results are found. If any results are found, it will correctly return the first result.

I have setup a very simple test to demonstrate this:

class Activity::MediaGroup < ActiveRecord::Base
  scope :test_fail, -> { where('1 = 0').first }
  scope :test_pass, -> { where('1 = 1').first }
end

Note for this test, I have set where conditions to match records or not. In reality, I am querying based on real conditions, and getting the same strange behavior.

Here are the results from the failing scope. As you can see, it makes the correct query, which has no results, so it then queries for all matching records and returns that instead:

irb(main):001:0> Activity::MediaGroup.test_fail
  Activity::MediaGroup Load (0.0ms)  SELECT "activity_media_groups".* FROM "activity_media_groups" WHERE (1 = 0) ORDER BY "activity_media_groups"."id" ASC LIMIT 1
  Activity::MediaGroup Load (0.0ms)  SELECT "activity_media_groups".* FROM "activity_media_groups"
=> #<ActiveRecord::Relation [#<Activity::MediaGroup id: 1, created_at: "2014-01-06 01:00:06", updated_at: "2014-01-06 01:00:06", user_id: 1>, #<Activity::MediaGroup id: 2, created_at: "2014-01-06 01:11:06", updated_at: "2014-01-06 01:11:06", user_id: 1>, #<Activity::MediaGroup id: 3, created_at: "2014-01-06 01:26:41", updated_at: "2014-01-06 01:26:41", user_id: 1>, #<Activity::MediaGroup id: 4, created_at: "2014-01-06 01:28:58", updated_at: "2014-01-06 01:28:58", user_id: 1>]>

The other scope operates as expected:

irb(main):002:0> Activity::MediaGroup.test_pass
  Activity::MediaGroup Load (1.0ms)  SELECT "activity_media_groups".* FROM "activity_media_groups" WHERE (1 = 1) ORDER BY "activity_media_groups"."id" ASC LIMIT 1
=> #<Activity::MediaGroup id: 1, created_at: "2014-01-06 01:00:06", updated_at: "2014-01-06 01:00:06", user_id: 1>

If I perform this same logic outside of a scope, I get the expected results:

irb(main):003:0> Activity::MediaGroup.where('1=0').first
  Activity::MediaGroup Load (0.0ms)  SELECT "activity_media_groups".* FROM "activity_media_groups" WHERE (1=0) ORDER BY "activity_media_groups"."id" ASC LIMIT 1
=> nil

Am I missing something here? This seems like a bug in Rails/ActiveRecord/Scopes to me unless there is some unknown behavior expectations I am unaware of.

@Satya - Yes, it should return a record and not a ARel, but as you can see if it doesn't find a record the scope does return all records in the ARel — Ryan

Siva Siva · Accepted Answer · 2014-01-06T05:17:14

This is not a bug or weirdness, after some research i've found its designed on purpose.

First of all,

The scope returns an ActiveRecord::Relation
If there are zero records its programmed to return all records which is again an ActiveRecord::Relation instead of nil

The idea behind this is to make scopes chainable (i.e) one of the key difference between scope and class methods

Example:

Lets use the following scenario: users will be able to filter posts by statuses, ordering by most recent updated ones. Simple enough, lets write scopes for that:

class Post < ActiveRecord::Base
  scope :by_status, -> status { where(status: status) }
  scope :recent, -> { order("posts.updated_at DESC") }
end

And we can call them freely like this:

Post.by_status('published').recent
# SELECT "posts".* FROM "posts" WHERE "posts"."status" = 'published' 
#   ORDER BY posts.updated_at DESC

Or with a user provided param:

Post.by_status(params[:status]).recent
# SELECT "posts".* FROM "posts" WHERE "posts"."status" = 'published' 
#   ORDER BY posts.updated_at DESC

So far, so good. Now lets move them to class methods, just for the sake of comparing:

class Post < ActiveRecord::Base
  def self.by_status(status)
    where(status: status)
  end

  def self.recent
    order("posts.updated_at DESC")
  end
end

Besides using a few extra lines, no big improvements. But now what happens if the :status parameter is nil or blank?

Post.by_status(nil).recent
# SELECT "posts".* FROM "posts" WHERE "posts"."status" IS NULL 
#   ORDER BY posts.updated_at DESC

Post.by_status('').recent
# SELECT "posts".* FROM "posts" WHERE "posts"."status" = '' 
#   ORDER BY posts.updated_at DESC

Oooops, I don’t think we wanted to allow these queries, did we? With scopes, we can easily fix that by adding a presence condition to our scope:

scope :by_status, -> status { where(status: status) if status.present? }

There we go:

Post.by_status(nil).recent
# SELECT "posts".* FROM "posts" ORDER BY posts.updated_at DESC

Post.by_status('').recent
# SELECT "posts".* FROM "posts" ORDER BY posts.updated_at DESC

Awesome. Now lets try to do the same with our beloved class method:

class Post < ActiveRecord::Base
  def self.by_status(status)
    where(status: status) if status.present?
  end
end

Running this:

Post.by_status('').recent
NoMethodError: undefined method `recent' for nil:NilClass

And :bomb:. The difference is that a scope will always return a relation, whereas our simple class method implementation will not. The class method should look like this instead:

def self.by_status(status)
  if status.present?
    where(status: status)
  else
    all
  end
end

Notice that I’m returning all for the nil/blank case, which in Rails 4 returns a relation (it previously returned the Array of items from the database). In Rails 3.2.x, you should use scoped there instead. And there we go:

Post.by_status('').recent
# SELECT "posts".* FROM "posts" ORDER BY posts.updated_at DESC

So the advice here is: never return nil from a class method that should work like a scope, otherwise you’re breaking the chainability condition implied by scopes, that always return a relation.

Long Story Short:

No matter what, scopes are intended to return ActiveRecord::Relation to make it chainable. If you are expecting first, last or find results you should use class methods

Source: http://blog.plataformatec.com.br/2013/02/active-record-scopes-vs-class-methods/

Rails Scope returns all instead of nil

2 Answers