What characters are forbidden in Windows and Linux directory names?

Question

I know that / is illegal in Linux, and the following are illegal in Windows (I think) * . " / \ [ ] : ; | ,

What else am I missing?

I need a comprehensive guide, however, and one that takes into account double-byte characters. Linking to outside resources is fine with me.

I need to first create a directory on the filesystem using a name that may contain forbidden characters, so I plan to replace those characters with underscores. I then need to write this directory and its contents to a zip file (using Java), so any additional advice concerning the names of zip directories would be appreciated.

Answer 1

A “comprehensive guide” of forbidden filename characters is not going to work on Windows because it reserves filenames as well as characters. Yes, characters like * " ? and others are forbidden, but there are a infinite number of names composed only of valid characters that are forbidden. For example, spaces and dots are valid filename characters, but names composed only of those characters are forbidden.

Windows does not distinguish between upper-case and lower-case characters, so you cannot create a folder named A if one named a already exists. Worse, seemingly-allowed names like PRN and CON, and many others, are reserved and not allowed. Windows also has several length restrictions; a filename valid in one folder may become invalid if moved to another folder. The rules for naming files and folders are on the Microsoft docs.

You cannot, in general, use user-generated text to create Windows directory names. If you want to allow users to name anything they want, you have to create safe names like A, AB, A2 et al., store user-generated names and their path equivalents in an application data file, and perform path mapping in your application.

If you absolutely must allow user-generated folder names, the only way to tell if they are invalid is to catch exceptions and assume the name is invalid. Even that is fraught with peril, as the exceptions thrown for denied access, offline drives, and out of drive space overlap with those that can be thrown for invalid names. You are opening up one huge can of hurt.

Answer 2

Let's keep it simple and answer the question, first.

1. The forbidden printable ASCII characters are:

   • Linux/Unix:

       / (forward slash)
     

   • Windows:

       < (less than)
       > (greater than)
       : (colon - sometimes works, but is actually NTFS Alternate Data Streams)
       " (double quote)
       / (forward slash)
       \ (backslash)
       | (vertical bar or pipe)
       ? (question mark)
       * (asterisk)
     

2. Non-printable characters

   If your data comes from a source that would permit non-printable characters then there is more to check for.

   • Linux/Unix:

       0 (NULL byte)
     

   • Windows:

       0-31 (ASCII control characters)
     

   Note: While it is legal under Linux/Unix file systems to create files with control characters in the filename, it might be a nightmare for the users to deal with such files.

3. Reserved file names

   The following filenames are reserved:

   • Windows:

       CON, PRN, AUX, NUL 
       COM1, COM2, COM3, COM4, COM5, COM6, COM7, COM8, COM9
       LPT1, LPT2, LPT3, LPT4, LPT5, LPT6, LPT7, LPT8, LPT9
     

     (both on their own and with arbitrary file extensions, e.g. LPT1.txt).

4. Other rules

   • Windows:

     Filenames cannot end in a space or dot.

   • macOS:

     You didn't ask for it, but just in case: Colon : and forward slash / depending on context are not permitted (e.g. Finder supports slashes, terminal supports colons). For details see https://superuser.com/questions/326103/what-are-invalid-characters-for-a-file-name-under-os-x

Answer 3

Under Linux and other Unix-related systems, there are only two characters that cannot appear in the name of a file or directory, and those are NUL '\0' and slash '/'. The slash, of course, can appear in a path name, separating directory components.

Rumour¹ has it that Steven Bourne (of 'shell' fame) had a directory containing 254 files, one for every single letter (character code) that can appear in a file name (excluding /, '\0'; the name . was the current directory, of course). It was used to test the Bourne shell and routinely wrought havoc on unwary programs such as backup programs.

Other people have covered the Windows rules.

Note that MacOS X has a case-insensitive file system.

---

¹The Practice of Programming

When Steve Bourne was writing his Unix shell (which came to be known as the Bourne shell), he made a directory of 254 files with one-character names, one for each byte value except '\0' and slash, the two characters that cannot appear in Unix file names. He used that directory for all manner of tests of pattern-matching and tokenization. (The test directory was of course created by a program.) For years afterwards, that directory was the bane of file-tree-walking programs; it tested them to destruction.

^{Note that the directory must have contained entries . and .., so it was arguably 253 files (and 2 directories), or 255 name entries, rather than 254 files. This doesn't affect the effectiveness of the anecdote, or the careful testing it describes.}

Answer 4

Instead of creating a blacklist of characters, you could use a whitelist. All things considered, the range of characters that make sense in a file or directory name context is quite short, and unless you have some very specific naming requirements your users will not hold it against your application if they cannot use the whole ASCII table.

It does not solve the problem of reserved names in the target file system, but with a whitelist it is easier to mitigate the risks at the source.

In that spirit, this is a range of characters that can be considered safe:

• Letters (a-z A-Z) - Unicode characters as well, if needed
• Digits (0-9)
• Underscore (_)
• Hyphen (-)
• Space
• Dot (.)

And any additional safe characters you wish to allow. Beyond this, you just have to enforce some additional rules regarding spaces and dots. This is usually sufficient:

• Name must contain at least one letter or number (to avoid only dots/spaces)
• Name must start with a letter or number (to avoid leading dots/spaces)
• Name may not end with a dot or space (simply trim those if present, like Explorer does)

This already allows quite complex and nonsensical names. For example, these names would be possible with these rules, and be valid file names in Windows/Linux:

• A...........ext
• B -.- .ext

In essence, even with so few whitelisted characters you should still decide what actually makes sense, and validate/adjust the name accordingly. In one of my applications, I used the same rules as above but stripped any duplicate dots and spaces.

Answer 5

The easy way to get Windows to tell you the answer is to attempt to rename a file via Explorer and type in / for the new name. Windows will popup a message box telling you the list of illegal characters.

A filename cannot contain any of the following characters:
    \ / : * ? " < > | 

https://support.microsoft.com/en-us/kb/177506

Answer 6

Well, if only for research purposes, then your best bet is to look at this Wikipedia entry on Filenames.

If you want to write a portable function to validate user input and create filenames based on that, the short answer is don't. Take a look at a portable module like Perl's File::Spec to have a glimpse to all the hops needed to accomplish such a "simple" task.

Answer 7

Discussing different possible approaches

Difficulties with defining, what's legal and not were already adressed and whitelists were suggested. But Windows supports more-than-8-bit characters. Wikipedia states, that (for example) the

modifier letter colon [(See 7. below) is] sometimes used in Windows filenames as it is identical to the colon in the Segoe UI font used for filenames. The [inherited ASCII] colon itself is not permitted.

Therefore, I want to present a much more liberal approach using Unicode characters to replace the "illegal" ones. I found the result in my comparable use-case by far more readable. Plus you can even restore the original content from the replacements.

Possible choices and research notes

To keep things organized, I will always give the character, it's name and the hexadecimal number representation. This is not case sensitive and leading zeroes can be added or ommitted freely, so for example U+002A and u+2a are equivalent. If available, I'll try to point to more info or alternatives - feel free to show me more or better ones.

1. Instead of * (U+2A * ASTERISK), you can use one of the many listed, for example U+2217 ∗ (ASTERISK OPERATOR) or the Full Width Asterisk U+FF0A ＊. I also included some of the good suggestions of Wally Brockway's answer, in this case u+20f0 ⃰ combining diacritical marks for symbols - I will from now on denote that source by ⁷.
2. Instead of . (U+2E . full stop), one of these could be a good option, for example ⋅ U+22C5 dot operator
3. Instead of " (U+22 * quotation mark), you can use “ U+201C english leftdoublequotemark, u+2036 ‶ reversed double prime⁷ or u+2033 ″ double prime⁷ (Alternatives see here)
4. Instead of / (U+2F / SOLIDUS), you can use ∕ DIVISION SLASH U+2215 (others here) or u+2044 ⁄ fraction slash⁷
5. Instead of \ (U+5C Reverse solidus), you can use ⧵ U+29F5 Reverse solidus operator (more) or u+20E5 ⃥ combining reverse solidus overlay⁷
6. To replace [ (U+5B [ Left square bracket) and ] (U+005D ] Right square bracket), you can use for example U+FF3B［ FULLWIDTH LEFT SQUARE BRACKET and U+FF3D ］FULLWIDTH RIGHT SQUARE BRACKET (from here, more possibilities here)
7. Instead of : (u+3a : colon), you can use U+2236 ∶ RATIO (for mathematical usage) or U+A789 ꞉ MODIFIER LETTER COLON, (see colon (letter), sometimes used in Windows filenames as it is identical to the colon in the Segoe UI font used for filenames. The colon itself is not permitted ... source and more replacements see here). Another alternative is this one: u+1361 ፡ ethiopic wordspace⁷
8. Instead of ; (u+3b ; semicolon), you can use U+037E ; GREEK QUESTION MARK (see here)
9. For | (u+7c | vertical line), there are some good substitutes such as: U+2223 ∣ DIVIDES, U+0964 । DEVANAGARI DANDA, U+01C0 ǀ LATIN LETTER DENTAL CLICK (the last ones from Wikipedia) or U+2D4F ⵏ Tifinagh Letter Yan. Also the box drawing characters contain various other options.
10. Instead of , (, U+002C COMMA), you can use for example ‚ U+201A SINGLE LOW-9 QUOTATION MARK (see here)
11. For ? (U+003F ? QUESTION MARK), these are good candidates: U+FF1F ？ FULLWIDTH QUESTION MARK or U+FE56 ﹖ SMALL QUESTION MARK (from here and here) There are two more from the Dingbats Block (search for "question") and the u+203d ‽ interrobang⁷
12. While my machine seems to accept it unchanged, I still want to include > (u+3e greater-than sign) and < (u+3c less-than sign) for the sake of completeness. The best replacement here is probably also from the quotation block, such as u+203a › single right-pointing angle quotation mark and u+2039 ‹ single left-pointing angle quotation mark respectively. The tifinagh block only contains ⵦ (u+2D66)⁷ to replace <. The last notion is ⋖ less-than with dot u+22D6 and ⋗ greater-than with dot u+22D7.

For additional ideas, you can also look for example into this block.

How do you type these characters

Say you want to type ⵏ (Tifinagh Letter Yan). To get its information, you can always search for this character on a suited platform such as the Unicode Lookup (add 0x when you search for hex) or this Unicode Table (that only allows to search for the name, in this case "Tifinagh Letter Yan"). You should obtain its Unicode number U+2D4F and the HTML-code ⵏ - note that 2D4F is hexadecimal for 11599. With this knowledge, you have several options to produce these special characters including the use of

• code points to unicode converter or again the Unicode Lookup to reversely, convert the numerical representation into the unicode character - set the code point base below to decimal or hexadecimal respectively
• a one-liner makro in Autohotkey: :?*:altpipe::{U+2D4F} to type ⵏ instead of the string altpipe - this is the way I input those special characters, my Autohotkey script can be shared if there is common interest
• Alt Characters or alt-codes by pressing and holding alt, followed by the decimal number for the desired character (more info for example here, look at a table here or there). For the example, that would be Alt+11599. Be aware, that many programs do not fully support this windows feature for all of unicode (as of time writing). Microsoft Office is an exception where it usually works, some other OSes provide similar functionality. Typing these chars with Alt-combinations into MS Word is also the way Wally Brockway suggests in his answer⁷ that was already mentionted - if you don't want to transfer all the hexadecimal values to the decimal asc, you can find some of them there⁷.
• in MS Office, you can also use ALT + X as described in this MS article to produce the chars
• if you rarely need it, you can of course still just copy-paste the special character of your choice instead of typing it

Answer 8

For Windows you can check it using PowerShell

$PathInvalidChars = [System.IO.Path]::GetInvalidPathChars() #36 chars

To display UTF-8 codes you can convert

$enc = [system.Text.Encoding]::UTF8
$PathInvalidChars | foreach { $enc.GetBytes($_) }

$FileNameInvalidChars = [System.IO.Path]::GetInvalidFileNameChars() #41 chars

$FileOnlyInvalidChars = @(':', '*', '?', '\', '/') #5 chars - as a difference

Answer 9

For anyone looking for a regex:

const BLACKLIST = /[<>:"\/\\|?*]/g;

Answer 10

In Windows 10 (2019), the following characters are forbidden by an error when you try to type them:

A file name can't contain any of the following characters:

\ / : * ? " < > |

Answer 11

Though the only illegal Unix chars might be / and NULL, although some consideration for command line interpretation should be included.

For example, while it might be legal to name a file 1>&2 or 2>&1 in Unix, file names such as this might be misinterpreted when used on a command line.

Similarly it might be possible to name a file $PATH, but when trying to access it from the command line, the shell will translate $PATH to its variable value.

Answer 12

Here's a c# implementation for windows based on Christopher Oezbek's answer

It was made more complex by the containsFolder boolean, but hopefully covers everything

/// <summary>
/// This will replace invalid chars with underscores, there are also some reserved words that it adds underscore to
/// </summary>
/// <remarks>
/// https://stackguides.com/questions/1976007/what-characters-are-forbidden-in-windows-and-linux-directory-names
/// </remarks>
/// <param name="containsFolder">Pass in true if filename represents a folder\file (passing true will allow slash)</param>
public static string EscapeFilename_Windows(string filename, bool containsFolder = false)
{
    StringBuilder builder = new StringBuilder(filename.Length + 12);

    int index = 0;

    // Allow colon if it's part of the drive letter
    if (containsFolder)
    {
        Match match = Regex.Match(filename, @"^\s*[A-Z]:\\", RegexOptions.IgnoreCase);
        if (match.Success)
        {
            builder.Append(match.Value);
            index = match.Length;
        }
    }

    // Character substitutions
    for (int cntr = index; cntr < filename.Length; cntr++)
    {
        char c = filename[cntr];

        switch (c)
        {
            case '\u0000':
            case '\u0001':
            case '\u0002':
            case '\u0003':
            case '\u0004':
            case '\u0005':
            case '\u0006':
            case '\u0007':
            case '\u0008':
            case '\u0009':
            case '\u000A':
            case '\u000B':
            case '\u000C':
            case '\u000D':
            case '\u000E':
            case '\u000F':
            case '\u0010':
            case '\u0011':
            case '\u0012':
            case '\u0013':
            case '\u0014':
            case '\u0015':
            case '\u0016':
            case '\u0017':
            case '\u0018':
            case '\u0019':
            case '\u001A':
            case '\u001B':
            case '\u001C':
            case '\u001D':
            case '\u001E':
            case '\u001F':

            case '<':
            case '>':
            case ':':
            case '"':
            case '/':
            case '|':
            case '?':
            case '*':
                builder.Append('_');
                break;

            case '\\':
                builder.Append(containsFolder ? c : '_');
                break;

            default:
                builder.Append(c);
                break;
        }
    }

    string built = builder.ToString();

    if (built == "")
    {
        return "_";
    }

    if (built.EndsWith(" ") || built.EndsWith("."))
    {
        built = built.Substring(0, built.Length - 1) + "_";
    }

    // These are reserved names, in either the folder or file name, but they are fine if following a dot
    // CON, PRN, AUX, NUL, COM0 .. COM9, LPT0 .. LPT9
    builder = new StringBuilder(built.Length + 12);
    index = 0;
    foreach (Match match in Regex.Matches(built, @"(^|\\)\s*(?<bad>CON|PRN|AUX|NUL|COM\d|LPT\d)\s*(\.|\\|$)", RegexOptions.IgnoreCase))
    {
        Group group = match.Groups["bad"];
        if (group.Index > index)
        {
            builder.Append(built.Substring(index, match.Index - index + 1));
        }

        builder.Append(group.Value);
        builder.Append("_");        // putting an underscore after this keyword is enough to make it acceptable

        index = group.Index + group.Length;
    }

    if (index == 0)
    {
        return built;
    }

    if (index < built.Length - 1)
    {
        builder.Append(built.Substring(index));
    }

    return builder.ToString();
}

Answer 13

As of 18/04/2017, no simple black or white list of characters and filenames is evident among the answers to this topic - and there are many replies.

The best suggestion I could come up with was to let the user name the file however he likes. Using an error handler when the application tries to save the file, catch any exceptions, assume the filename is to blame (obviously after making sure the save path was ok as well), and prompt the user for a new file name. For best results, place this checking procedure within a loop that continues until either the user gets it right or gives up. Worked best for me (at least in VBA).

Answer 14

I always assumed that banned characters in Windows filenames meant that all exotic characters would also be outlawed. The inability to use ?, / and : in particular irked me. One day I discovered that it was virtually only those chars which were banned. Other Unicode characters may be used. So the nearest Unicode characters to the banned ones I could find were identified and MS Word macros were made for them as Alt+?, Alt+: etc. Now I form the filename in Word, using the substitute chars, and copy it to the Windows filename. So far I have had no problems.

Here are the substitute chars (Alt + the decimal Unicode) :

• ⃰ ⇔ Alt8432
• ⁄ ⇔ Alt8260
• ⃥ ⇔ Alt8421
• ∣ ⇔ Alt8739
• ⵦ ⇔ Alt11622
• ⮚ ⇔ Alt11162
• ‽ ⇔ Alt8253
• ፡ ⇔ Alt4961
• ‶ ⇔ Alt8246
• ″ ⇔ Alt8243

As a test I formed a filename using all of those chars and Windows accepted it.

Answer 15

When creating internet shortcuts in Windows, to create the file name, it skips illegal characters, except for forward slash, which is converted to minus.

Answer 16

The .NET Framework System.IO provides the following functions for invalid file system characters:

• Path.GetInvalidFileNameChars
• Path.GetInvalidPathChars

Those functions should return appropriate results depending on the platform the .NET runtime is running in.

Answer 17

In Unix shells, you can quote almost every character in single quotes '. Except the single quote itself, and you can't express control characters, because \ is not expanded. Accessing the single quote itself from within a quoted string is possible, because you can concatenate strings with single and double quotes, like 'I'"'"'m' which can be used to access a file called "I'm" (double quote also possible here).

So you should avoid all control characters, because they are too difficult to enter in the shell. The rest still is funny, especially files starting with a dash, because most commands read those as options unless you have two dashes -- before, or you specify them with ./, which also hides the starting -.

If you want to be nice, don't use any of the characters the shell and typical commands use as syntactical elements, sometimes position dependent, so e.g. you can still use -, but not as first character; same with ., you can use it as first character only when you mean it ("hidden file"). When you are mean, your file names are VT100 escape sequences ;-), so that an ls garbles the output.

Answer 18

I had the same need and was looking for recommendation or standard references and came across this thread. My current blacklist of characters that should be avoided in file and directory names are:

$CharactersInvalidForFileName = {
    "pound" -> "#",
    "left angle bracket" -> "<",
    "dollar sign" -> "$",
    "plus sign" -> "+",
    "percent" -> "%",
    "right angle bracket" -> ">",
    "exclamation point" -> "!",
    "backtick" -> "`",
    "ampersand" -> "&",
    "asterisk" -> "*",
    "single quotes" -> "“",
    "pipe" -> "|",
    "left bracket" -> "{",
    "question mark" -> "?",
    "double quotes" -> "”",
    "equal sign" -> "=",
    "right bracket" -> "}",
    "forward slash" -> "/",
    "colon" -> ":",
    "back slash" -> "\\",
    "lank spaces" -> "b",
    "at sign" -> "@"
};