There is no difference.
Reason:
Books on-line says "
COUNT ( { [ [ ALL | DISTINCT ] expression ] | * } )"
"1" is a non-null expression: so it's the same as COUNT(*).
The optimizer recognizes it for what it is: trivial.
The same as EXISTS (SELECT * ... or EXISTS (SELECT 1 ...
Example:
SELECT COUNT(1) FROM dbo.tab800krows
SELECT COUNT(1),FKID FROM dbo.tab800krows GROUP BY FKID
SELECT COUNT(*) FROM dbo.tab800krows
SELECT COUNT(*),FKID FROM dbo.tab800krows GROUP BY FKID
Same IO, same plan, the works
Edit, Aug 2011
Edit, Dec 2011
COUNT(*) is mentioned specifically in ANSI-92 (look for "Scalar expressions 125")
Case:
a) If COUNT(*) is specified, then the result is the cardinality of T.
That is, the ANSI standard recognizes it as bleeding obvious what you mean. COUNT(1) has been optimized out by RDBMS vendors because of this superstition. Otherwise it would be evaluated as per ANSI
b) Otherwise, let TX be the single-column table that is the result of applying the <value expression> to each row of T and eliminating null values. If one or more null values are eliminated, then a completion condition is raised: warning-
In SQL Server, these statements yield the same plans.
Contrary to the popular opinion, in Oracle they do too.
SYS_GUID() in Oracle is quite computation intensive function.
In my test database, t_even is a table with 1,000,000 rows
This query:
SELECT COUNT(SYS_GUID())
FROM t_even
runs for 48 seconds, since the function needs to evaluate each SYS_GUID() returned to make sure it's not a NULL.
However, this query:
SELECT COUNT(*)
FROM (
SELECT SYS_GUID()
FROM t_even
)
runs for but 2 seconds, since it doen't even try to evaluate SYS_GUID() (despite * being argument to COUNT(*))
Clearly, COUNT(*) and COUNT(1) will always return the same result. Therefore, if one were slower than the other it would effectively be due to an optimiser bug. Since both forms are used very frequently in queries, it would make no sense for a DBMS to allow such a bug to remain unfixed. Hence you will find that the performance of both forms is (probably) identical in all major SQL DBMSs.
I work on the SQL Server team and I can hopefully clarify a few points in this thread (I had not seen it previously, so I am sorry the engineering team has not done so previously).
First, there is no semantic difference between select count(1) from table vs. select count(*) from table. They return the same results in all cases (and it is a bug if not). As noted in the other answers, select count(column) from table is semantically different and does not always return the same results as count(*).
Second, with respect to performance, there are two aspects that would matter in SQL Server (and SQL Azure): compilation-time work and execution-time work. The Compilation time work is a trivially small amount of extra work in the current implementation. There is an expansion of the * to all columns in some cases followed by a reduction back to 1 column being output due to how some of the internal operations work in binding and optimization. I doubt it would show up in any measurable test, and it would likely get lost in the noise of all the other things that happen under the covers (such as auto-stats, xevent sessions, query store overhead, triggers, etc.). It is maybe a few thousand extra CPU instructions. So, count(1) does a tiny bit less work during compilation (which will usually happen once and the plan is cached across multiple subsequent executions). For execution time, assuming the plans are the same there should be no measurable difference. (One of the earlier examples shows a difference - it is most likely due to other factors on the machine if the plan is the same).
As to how the plan can potentially be different. These are extremely unlikely to happen, but it is potentially possible in the architecture of the current optimizer. SQL Server's optimizer works as a search program (think: computer program playing chess searching through various alternatives for different parts of the query and costing out the alternatives to find the cheapest plan in reasonable time). This search has a few limits on how it operates to keep query compilation finishing in reasonable time. For queries beyond the most trivial, there are phases of the search and they deal with tranches of queries based on how costly the optimizer thinks the query is to potentially execute. There are 3 main search phases, and each phase can run more aggressive(expensive) heuristics trying to find a cheaper plan than any prior solution. Ultimately, there is a decision process at the end of each phase that tries to determine whether it should return the plan it found so far or should it keep searching. This process uses the total time taken so far vs. the estimated cost of the best plan found so far. So, on different machines with different speeds of CPUs it is possible (albeit rare) to get different plans due to timing out in an earlier phase with a plan vs. continuing into the next search phase. There are also a few similar scenarios related to timing out of the last phase and potentially running out of memory on very, very expensive queries that consume all the memory on the machine (not usually a problem on 64-bit but it was a larger concern back on 32-bit servers). Ultimately, if you get a different plan the performance at runtime would differ. I don't think it is remotely likely that the difference in compilation time would EVER lead to any of these conditions happening.
Net-net: Please use whichever of the two you want as none of this matters in any practical form. (There are far, far larger factors that impact performance in SQL beyond this topic, honestly).
I hope this helps. I did write a book chapter about how the optimizer works but I don't know if its appropriate to post it here (as I get tiny royalties from it still I believe). So, instead of posting that I'll post a link to a talk I gave at SQLBits in the UK about how the optimizer works at a high level so you can see the different main phases of the search in a bit more detail if you want to learn about that. Here's the video link: https://sqlbits.com/Sessions/Event6/inside_the_sql_server_query_optimizer
In the SQL-92 Standard, COUNT(*) specifically means "the cardinality of the table expression" (could be a base table, `VIEW, derived table, CTE, etc).
I guess the idea was that COUNT(*) is easy to parse. Using any other expression requires the parser to ensure it doesn't reference any columns (COUNT('a') where a is a literal and COUNT(a) where a is a column can yield different results).
In the same vein, COUNT(*) can be easily picked out by a human coder familiar with the SQL Standards, a useful skill when working with more than one vendor's SQL offering.
Also, in the special case SELECT COUNT(*) FROM MyPersistedTable;, the thinking is the DBMS is likely to hold statistics for the cardinality of the table.
Therefore, because COUNT(1) and COUNT(*) are semantically equivalent, I use COUNT(*).
As this question comes up again and again, here is one more answer. I hope to add something for beginners wondering about "best practice" here.
SELECT COUNT(*) FROM something counts records which is an easy task.
SELECT COUNT(1) FROM something retrieves a 1 per record and than counts the 1s that are not null, which is essentially counting records, only more complicated.
Having said this: Good dbms notice that the second statement will result in the same count as the first statement and re-interprete it accordingly, as not to do unnecessary work. So usually both statements will result in the same execution plan and take the same amount of time.
However from the point of readability you should use the first statement. You want to count records, so count records, not expressions. Use COUNT(expression) only when you want to count non-null occurences of something.
I ran a quick test on SQL Server 2012 on an 8 GB RAM hyper-v box. You can see the results for yourself. I was not running any other windowed application apart from SQL Server Management Studio while running these tests.
My table schema:
CREATE TABLE [dbo].[employee](
[Id] [bigint] IDENTITY(1,1) NOT NULL,
[Name] [nvarchar](50) NOT NULL,
CONSTRAINT [PK_employee] PRIMARY KEY CLUSTERED
(
[Id] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
Total number of records in Employee table: 178090131 (~ 178 million rows)
First Query:
Set Statistics Time On
Go
Select Count(*) From Employee
Go
Set Statistics Time Off
Go
Result of First Query:
SQL Server parse and compile time:
CPU time = 0 ms, elapsed time = 35 ms.
(1 row(s) affected)
SQL Server Execution Times:
CPU time = 10766 ms, elapsed time = 70265 ms.
SQL Server parse and compile time:
CPU time = 0 ms, elapsed time = 0 ms.
Second Query:
Set Statistics Time On
Go
Select Count(1) From Employee
Go
Set Statistics Time Off
Go
Result of Second Query:
SQL Server parse and compile time:
CPU time = 14 ms, elapsed time = 14 ms.
(1 row(s) affected)
SQL Server Execution Times:
CPU time = 11031 ms, elapsed time = 70182 ms.
SQL Server parse and compile time:
CPU time = 0 ms, elapsed time = 0 ms.
You can notice there is a difference of 83 (= 70265 - 70182) milliseconds which can easily be attributed to exact system condition at the time queries are run. Also I did a single run, so this difference will become more accurate if I do several runs and do some averaging. If for such a huge data-set the difference is coming less than 100 milliseconds, then we can easily conclude that the two queries do not have any performance difference exhibited by the SQL Server Engine.
Note : RAM hits close to 100% usage in both the runs. I restarted SQL Server service before starting both the runs.
SET STATISTICS TIME ON
select count(1) from MyTable (nolock) -- table containing 1 million records.
SQL Server Execution Times:
CPU time = 31 ms, elapsed time = 36 ms.
select count(*) from MyTable (nolock) -- table containing 1 million records.
SQL Server Execution Times:
CPU time = 46 ms, elapsed time = 37 ms.
I've ran this hundreds of times, clearing cache every time.. The results vary from time to time as server load varies, but almost always count(*) has higher cpu time.
There is an article showing that the COUNT(1) on Oracle is just an alias to COUNT(*), with a proof about that.
I will quote some parts:
There is a part of the database software that is called “The Optimizer”, which is defined in the official documentation as “Built-in database software that determines the most efficient way to execute a SQL statement“.
One of the components of the optimizer is called “the transformer”, whose role is to determine whether it is advantageous to rewrite the original SQL statement into a semantically equivalent SQL statement that could be more efficient.
Would you like to see what the optimizer does when you write a query using COUNT(1)?
With a user with ALTER SESSION privilege, you can put a tracefile_identifier, enable the optimizer tracing and run the COUNT(1) select, like: SELECT /* test-1 */ COUNT(1) FROM employees;.
After that, you need to localize the trace files, what can be done with SELECT VALUE FROM V$DIAG_INFO WHERE NAME = 'Diag Trace';. Later on the file, you will find:
SELECT COUNT(*) “COUNT(1)” FROM “COURSE”.”EMPLOYEES” “EMPLOYEES”
As you can see, it's just an alias for COUNT(*).
Another important comment: the COUNT(*) was really faster two decades ago on Oracle, before Oracle 7.3:
Count(1) has been rewritten in count(*) since 7.3 because Oracle like to Auto-tune mythic statements. In earlier Oracle7, oracle had to evaluate (1) for each row, as a function, before DETERMINISTIC and NON-DETERMINISTIC exist.
So two decades ago, count(*) was faster
For another databases as Sql Server, it should be researched individually for each one.
I know that this question is specific for Sql Server, but the other questions on SO about the same subject, without mention the database, was closed and marked as duplicated from this answer.
In all RDBMS, the two ways of counting are equivalent in terms of what result they produce. Regarding performance, I have not observed any performance difference in SQL Server, but it may be worth pointing out that some RDBMS, e.g. PostgreSQL 11, have less optimal implementations for COUNT(1) as they check for the argument expression's nullability as can be seen in this post.
I've found a 10% performance difference for 1M rows when running:
-- Faster
SELECT COUNT(*) FROM t;
-- 10% slower
SELECT COUNT(1) FROM t;
COUNT(1) is not substantially different from COUNT(*), if at all. As to the question of COUNTing NULLable COLUMNs, this can be straightforward to demo the differences between COUNT(*) and COUNT(<some col>)--
USE tempdb;
GO
IF OBJECT_ID( N'dbo.Blitzen', N'U') IS NOT NULL DROP TABLE dbo.Blitzen;
GO
CREATE TABLE dbo.Blitzen (ID INT NULL, Somelala CHAR(1) NULL);
INSERT dbo.Blitzen SELECT 1, 'A';
INSERT dbo.Blitzen SELECT NULL, NULL;
INSERT dbo.Blitzen SELECT NULL, 'A';
INSERT dbo.Blitzen SELECT 1, NULL;
SELECT COUNT(*), COUNT(1), COUNT(ID), COUNT(Somelala) FROM dbo.Blitzen;
GO
DROP TABLE dbo.Blitzen;
GO
If you run the following in SQL Server, you'll notice that COUNT(1) is evaluated as COUNT(*) anyway. So it appears that there is no difference, and also that COUNT(*) is the expression most native to the query optimizer:
SET SHOWPLAN_TEXT ON
GO
SELECT COUNT(1)
FROM <table>
GO
SET SHOWPLAN_TEXT OFF
GO
COUNT(*)vsCOUNT(1)vsCOUNT(pk)— which is better?. There's alsoCOUNT(*)vsCOUNT(column-name)— which is more correct?. There may well be other duplicates. – Jonathan Leffler