2894
votes

Anyone tinkering with Python long enough has been bitten (or torn to pieces) by the following issue:

def foo(a=[]):
    a.append(5)
    return a

Python novices would expect this function to always return a list with only one element: [5]. The result is instead very different, and very astonishing (for a novice):

>>> foo()
[5]
>>> foo()
[5, 5]
>>> foo()
[5, 5, 5]
>>> foo()
[5, 5, 5, 5]
>>> foo()

A manager of mine once had his first encounter with this feature, and called it "a dramatic design flaw" of the language. I replied that the behavior had an underlying explanation, and it is indeed very puzzling and unexpected if you don't understand the internals. However, I was not able to answer (to myself) the following question: what is the reason for binding the default argument at function definition, and not at function execution? I doubt the experienced behavior has a practical use (who really used static variables in C, without breeding bugs?)

Edit:

Baczek made an interesting example. Together with most of your comments and Utaal's in particular, I elaborated further:

>>> def a():
...     print("a executed")
...     return []
... 
>>>            
>>> def b(x=a()):
...     x.append(5)
...     print(x)
... 
a executed
>>> b()
[5]
>>> b()
[5, 5]

To me, it seems that the design decision was relative to where to put the scope of parameters: inside the function or "together" with it?

Doing the binding inside the function would mean that x is effectively bound to the specified default when the function is called, not defined, something that would present a deep flaw: the def line would be "hybrid" in the sense that part of the binding (of the function object) would happen at definition, and part (assignment of default parameters) at function invocation time.

The actual behavior is more consistent: everything of that line gets evaluated when that line is executed, meaning at function definition.

30
Complementary question - Good uses for mutable default argumentsJonathan
I have not doubt mutable arguments violate least astonishment principle for an average person, and I have seen beginners stepping there, then heroically replacing mailing lists with mailing tuples. Nevertheless mutable arguments are still in line with Python Zen (Pep 20) and falls into "obvious for Dutch" (understood/exploited by hard core python programmers) clause. The recommended workaround with doc string is the best, yet resistance to doc strings and any (written) docs is not so uncommon nowadays. Personally, I would prefer a decorator (say @fixed_defaults).Serge
My argument when I come across this is: "Why do you need to create a function that returns a mutable that could optionally be a mutable you would pass to the function? Either it alters a mutable or creates a new one. Why do you need to do both with one function? And why should the interpreter be rewritten to allow you to do that without adding three lines to your code?" Because we are talking about rewriting the way the interpreter handles function definitions and evocations here. That's a lot to do for a barely necessary use case.Alan Leuthard
"Python novices would expect this function to always return a list with only one element: [5]." I'm a Python novice, and I wouldn't expect this, because obviously foo([1]) will return [1, 5], not [5]. What you meant to say is that a novice would expect the function called with no parameter will always return [5].symplectomorphic
This question asks "Why did this [the wrong way] get implemented so?" It doesn't ask "What's the right way?", which is covered by [Why does using arg=None fix Python's mutable default argument issue?]*(stackoverflow.com/questions/10676729/…). New users are almost always less interested in the former and much more in the latter, so that's sometimes a very useful link/dupe to cite.smci

30 Answers

1736
votes

Actually, this is not a design flaw, and it is not because of internals, or performance.
It comes simply from the fact that functions in Python are first-class objects, and not only a piece of code.

As soon as you get to think into this way, then it completely makes sense: a function is an object being evaluated on its definition; default parameters are kind of "member data" and therefore their state may change from one call to the other - exactly as in any other object.

In any case, Effbot has a very nice explanation of the reasons for this behavior in Default Parameter Values in Python.
I found it very clear, and I really suggest reading it for a better knowledge of how function objects work.

290
votes

Suppose you have the following code

fruits = ("apples", "bananas", "loganberries")

def eat(food=fruits):
    ...

When I see the declaration of eat, the least astonishing thing is to think that if the first parameter is not given, that it will be equal to the tuple ("apples", "bananas", "loganberries")

However, supposed later on in the code, I do something like

def some_random_function():
    global fruits
    fruits = ("blueberries", "mangos")

then if default parameters were bound at function execution rather than function declaration then I would be astonished (in a very bad way) to discover that fruits had been changed. This would be more astonishing IMO than discovering that your foo function above was mutating the list.

The real problem lies with mutable variables, and all languages have this problem to some extent. Here's a question: suppose in Java I have the following code:

StringBuffer s = new StringBuffer("Hello World!");
Map<StringBuffer,Integer> counts = new HashMap<StringBuffer,Integer>();
counts.put(s, 5);
s.append("!!!!");
System.out.println( counts.get(s) );  // does this work?

Now, does my map use the value of the StringBuffer key when it was placed into the map, or does it store the key by reference? Either way, someone is astonished; either the person who tried to get the object out of the Map using a value identical to the one they put it in with, or the person who can't seem to retrieve their object even though the key they're using is literally the same object that was used to put it into the map (this is actually why Python doesn't allow its mutable built-in data types to be used as dictionary keys).

Your example is a good one of a case where Python newcomers will be surprised and bitten. But I'd argue that if we "fixed" this, then that would only create a different situation where they'd be bitten instead, and that one would be even less intuitive. Moreover, this is always the case when dealing with mutable variables; you always run into cases where someone could intuitively expect one or the opposite behavior depending on what code they're writing.

I personally like Python's current approach: default function arguments are evaluated when the function is defined and that object is always the default. I suppose they could special-case using an empty list, but that kind of special casing would cause even more astonishment, not to mention be backwards incompatible.

259
votes

The relevant part of the documentation:

Default parameter values are evaluated from left to right when the function definition is executed. This means that the expression is evaluated once, when the function is defined, and that the same “pre-computed” value is used for each call. This is especially important to understand when a default parameter is a mutable object, such as a list or a dictionary: if the function modifies the object (e.g. by appending an item to a list), the default value is in effect modified. This is generally not what was intended. A way around this is to use None as the default, and explicitly test for it in the body of the function, e.g.:

def whats_on_the_telly(penguin=None):
    if penguin is None:
        penguin = []
    penguin.append("property of the zoo")
    return penguin
123
votes

I know nothing about the Python interpreter inner workings (and I'm not an expert in compilers and interpreters either) so don't blame me if I propose anything unsensible or impossible.

Provided that python objects are mutable I think that this should be taken into account when designing the default arguments stuff. When you instantiate a list:

a = []

you expect to get a new list referenced by a.

Why should the a=[] in

def x(a=[]):

instantiate a new list on function definition and not on invocation? It's just like you're asking "if the user doesn't provide the argument then instantiate a new list and use it as if it was produced by the caller". I think this is ambiguous instead:

def x(a=datetime.datetime.now()):

user, do you want a to default to the datetime corresponding to when you're defining or executing x? In this case, as in the previous one, I'll keep the same behaviour as if the default argument "assignment" was the first instruction of the function (datetime.now() called on function invocation). On the other hand, if the user wanted the definition-time mapping he could write:

b = datetime.datetime.now()
def x(a=b):

I know, I know: that's a closure. Alternatively Python might provide a keyword to force definition-time binding:

def x(static a=b):
87
votes

Well, the reason is quite simply that bindings are done when code is executed, and the function definition is executed, well... when the functions is defined.

Compare this:

class BananaBunch:
    bananas = []

    def addBanana(self, banana):
        self.bananas.append(banana)

This code suffers from the exact same unexpected happenstance. bananas is a class attribute, and hence, when you add things to it, it's added to all instances of that class. The reason is exactly the same.

It's just "How It Works", and making it work differently in the function case would probably be complicated, and in the class case likely impossible, or at least slow down object instantiation a lot, as you would have to keep the class code around and execute it when objects are created.

Yes, it is unexpected. But once the penny drops, it fits in perfectly with how Python works in general. In fact, it's a good teaching aid, and once you understand why this happens, you'll grok python much better.

That said it should feature prominently in any good Python tutorial. Because as you mention, everyone runs into this problem sooner or later.

76
votes

Why don't you introspect?

I'm really surprised no one has performed the insightful introspection offered by Python (2 and 3 apply) on callables.

Given a simple little function func defined as:

>>> def func(a = []):
...    a.append(5)

When Python encounters it, the first thing it will do is compile it in order to create a code object for this function. While this compilation step is done, Python evaluates* and then stores the default arguments (an empty list [] here) in the function object itself. As the top answer mentioned: the list a can now be considered a member of the function func.

So, let's do some introspection, a before and after to examine how the list gets expanded inside the function object. I'm using Python 3.x for this, for Python 2 the same applies (use __defaults__ or func_defaults in Python 2; yes, two names for the same thing).

Function Before Execution:

>>> def func(a = []):
...     a.append(5)
...     

After Python executes this definition it will take any default parameters specified (a = [] here) and cram them in the __defaults__ attribute for the function object (relevant section: Callables):

>>> func.__defaults__
([],)

O.k, so an empty list as the single entry in __defaults__, just as expected.

Function After Execution:

Let's now execute this function:

>>> func()

Now, let's see those __defaults__ again:

>>> func.__defaults__
([5],)

Astonished? The value inside the object changes! Consecutive calls to the function will now simply append to that embedded list object:

>>> func(); func(); func()
>>> func.__defaults__
([5, 5, 5, 5],)

So, there you have it, the reason why this 'flaw' happens, is because default arguments are part of the function object. There's nothing weird going on here, it's all just a bit surprising.

The common solution to combat this is to use None as the default and then initialize in the function body:

def func(a = None):
    # or: a = [] if a is None else a
    if a is None:
        a = []

Since the function body is executed anew each time, you always get a fresh new empty list if no argument was passed for a.


To further verify that the list in __defaults__ is the same as that used in the function func you can just change your function to return the id of the list a used inside the function body. Then, compare it to the list in __defaults__ (position [0] in __defaults__) and you'll see how these are indeed refering to the same list instance:

>>> def func(a = []): 
...     a.append(5)
...     return id(a)
>>>
>>> id(func.__defaults__[0]) == func()
True

All with the power of introspection!


* To verify that Python evaluates the default arguments during compilation of the function, try executing the following:

def bar(a=input('Did you just see me without calling the function?')): 
    pass  # use raw_input in Py2

as you'll notice, input() is called before the process of building the function and binding it to the name bar is made.

63
votes

I used to think that creating the objects at runtime would be the better approach. I'm less certain now, since you do lose some useful features, though it may be worth it regardless simply to prevent newbie confusion. The disadvantages of doing so are:

1. Performance

def foo(arg=something_expensive_to_compute())):
    ...

If call-time evaluation is used, then the expensive function is called every time your function is used without an argument. You'd either pay an expensive price on each call, or need to manually cache the value externally, polluting your namespace and adding verbosity.

2. Forcing bound parameters

A useful trick is to bind parameters of a lambda to the current binding of a variable when the lambda is created. For example:

funcs = [ lambda i=i: i for i in range(10)]

This returns a list of functions that return 0,1,2,3... respectively. If the behaviour is changed, they will instead bind i to the call-time value of i, so you would get a list of functions that all returned 9.

The only way to implement this otherwise would be to create a further closure with the i bound, ie:

def make_func(i): return lambda: i
funcs = [make_func(i) for i in range(10)]

3. Introspection

Consider the code:

def foo(a='test', b=100, c=[]):
   print a,b,c

We can get information about the arguments and defaults using the inspect module, which

>>> inspect.getargspec(foo)
(['a', 'b', 'c'], None, None, ('test', 100, []))

This information is very useful for things like document generation, metaprogramming, decorators etc.

Now, suppose the behaviour of defaults could be changed so that this is the equivalent of:

_undefined = object()  # sentinel value

def foo(a=_undefined, b=_undefined, c=_undefined)
    if a is _undefined: a='test'
    if b is _undefined: b=100
    if c is _undefined: c=[]

However, we've lost the ability to introspect, and see what the default arguments are. Because the objects haven't been constructed, we can't ever get hold of them without actually calling the function. The best we could do is to store off the source code and return that as a string.

62
votes

5 points in defense of Python

  1. Simplicity: The behavior is simple in the following sense: Most people fall into this trap only once, not several times.

  2. Consistency: Python always passes objects, not names. The default parameter is, obviously, part of the function heading (not the function body). It therefore ought to be evaluated at module load time (and only at module load time, unless nested), not at function call time.

  3. Usefulness: As Frederik Lundh points out in his explanation of "Default Parameter Values in Python", the current behavior can be quite useful for advanced programming. (Use sparingly.)

  4. Sufficient documentation: In the most basic Python documentation, the tutorial, the issue is loudly announced as an "Important warning" in the first subsection of Section "More on Defining Functions". The warning even uses boldface, which is rarely applied outside of headings. RTFM: Read the fine manual.

  5. Meta-learning: Falling into the trap is actually a very helpful moment (at least if you are a reflective learner), because you will subsequently better understand the point "Consistency" above and that will teach you a great deal about Python.

54
votes

This behavior is easy explained by:

  1. function (class etc.) declaration is executed only once, creating all default value objects
  2. everything is passed by reference

So:

def x(a=0, b=[], c=[], d=0):
    a = a + 1
    b = b + [1]
    c.append(1)
    print a, b, c
  1. a doesn't change - every assignment call creates new int object - new object is printed
  2. b doesn't change - new array is build from default value and printed
  3. c changes - operation is performed on same object - and it is printed
36
votes

What you're asking is why this:

def func(a=[], b = 2):
    pass

isn't internally equivalent to this:

def func(a=None, b = None):
    a_default = lambda: []
    b_default = lambda: 2
    def actual_func(a=None, b=None):
        if a is None: a = a_default()
        if b is None: b = b_default()
    return actual_func
func = func()

except for the case of explicitly calling func(None, None), which we'll ignore.

In other words, instead of evaluating default parameters, why not store each of them, and evaluate them when the function is called?

One answer is probably right there--it would effectively turn every function with default parameters into a closure. Even if it's all hidden away in the interpreter and not a full-blown closure, the data's got to be stored somewhere. It'd be slower and use more memory.

35
votes

1) The so-called problem of "Mutable Default Argument" is in general a special example demonstrating that:
"All functions with this problem suffer also from similar side effect problem on the actual parameter,"
That is against the rules of functional programming, usually undesiderable and should be fixed both together.

Example:

def foo(a=[]):                 # the same problematic function
    a.append(5)
    return a

>>> somevar = [1, 2]           # an example without a default parameter
>>> foo(somevar)
[1, 2, 5]
>>> somevar
[1, 2, 5]                      # usually expected [1, 2]

Solution: a copy
An absolutely safe solution is to copy or deepcopy the input object first and then to do whatever with the copy.

def foo(a=[]):
    a = a[:]     # a copy
    a.append(5)
    return a     # or everything safe by one line: "return a + [5]"

Many builtin mutable types have a copy method like some_dict.copy() or some_set.copy() or can be copied easy like somelist[:] or list(some_list). Every object can be also copied by copy.copy(any_object) or more thorough by copy.deepcopy() (the latter useful if the mutable object is composed from mutable objects). Some objects are fundamentally based on side effects like "file" object and can not be meaningfully reproduced by copy. copying

Example problem for a similar SO question

class Test(object):            # the original problematic class
  def __init__(self, var1=[]):
    self._var1 = var1

somevar = [1, 2]               # an example without a default parameter
t1 = Test(somevar)
t2 = Test(somevar)
t1._var1.append([1])
print somevar                  # [1, 2, [1]] but usually expected [1, 2]
print t2._var1                 # [1, 2, [1]] but usually expected [1, 2]

It shouldn't be neither saved in any public attribute of an instance returned by this function. (Assuming that private attributes of instance should not be modified from outside of this class or subclasses by convention. i.e. _var1 is a private attribute )

Conclusion:
Input parameters objects shouldn't be modified in place (mutated) nor they should not be binded into an object returned by the function. (If we prefere programming without side effects which is strongly recommended. see Wiki about "side effect" (The first two paragraphs are relevent in this context.) .)

2)
Only if the side effect on the actual parameter is required but unwanted on the default parameter then the useful solution is def ...(var1=None): if var1 is None: var1 = [] More..

3) In some cases is the mutable behavior of default parameters useful.

30
votes

This actually has nothing to do with default values, other than that it often comes up as an unexpected behaviour when you write functions with mutable default values.

>>> def foo(a):
    a.append(5)
    print a

>>> a  = [5]
>>> foo(a)
[5, 5]
>>> foo(a)
[5, 5, 5]
>>> foo(a)
[5, 5, 5, 5]
>>> foo(a)
[5, 5, 5, 5, 5]

No default values in sight in this code, but you get exactly the same problem.

The problem is that foo is modifying a mutable variable passed in from the caller, when the caller doesn't expect this. Code like this would be fine if the function was called something like append_5; then the caller would be calling the function in order to modify the value they pass in, and the behaviour would be expected. But such a function would be very unlikely to take a default argument, and probably wouldn't return the list (since the caller already has a reference to that list; the one it just passed in).

Your original foo, with a default argument, shouldn't be modifying a whether it was explicitly passed in or got the default value. Your code should leave mutable arguments alone unless it is clear from the context/name/documentation that the arguments are supposed to be modified. Using mutable values passed in as arguments as local temporaries is an extremely bad idea, whether we're in Python or not and whether there are default arguments involved or not.

If you need to destructively manipulate a local temporary in the course of computing something, and you need to start your manipulation from an argument value, you need to make a copy.

27
votes

Already busy topic, but from what I read here, the following helped me realizing how it's working internally:

def bar(a=[]):
     print id(a)
     a = a + [1]
     print id(a)
     return a

>>> bar()
4484370232
4484524224
[1]
>>> bar()
4484370232
4484524152
[1]
>>> bar()
4484370232 # Never change, this is 'class property' of the function
4484523720 # Always a new object 
[1]
>>> id(bar.func_defaults[0])
4484370232
26
votes

It's a performance optimization. As a result of this functionality, which of these two function calls do you think is faster?

def print_tuple(some_tuple=(1,2,3)):
    print some_tuple

print_tuple()        #1
print_tuple((1,2,3)) #2

I'll give you a hint. Here's the disassembly (see http://docs.python.org/library/dis.html):

#1

0 LOAD_GLOBAL              0 (print_tuple)
3 CALL_FUNCTION            0
6 POP_TOP
7 LOAD_CONST               0 (None)
10 RETURN_VALUE

#2

 0 LOAD_GLOBAL              0 (print_tuple)
 3 LOAD_CONST               4 ((1, 2, 3))
 6 CALL_FUNCTION            1
 9 POP_TOP
10 LOAD_CONST               0 (None)
13 RETURN_VALUE

I doubt the experienced behavior has a practical use (who really used static variables in C, without breeding bugs ?)

As you can see, there is a performance benefit when using immutable default arguments. This can make a difference if it's a frequently called function or the default argument takes a long time to construct. Also, bear in mind that Python isn't C. In C you have constants that are pretty much free. In Python you don't have this benefit.

25
votes

Python: The Mutable Default Argument

Default arguments get evaluated at the time the function is compiled into a function object. When used by the function, multiple times by that function, they are and remain the same object.

When they are mutable, when mutated (for example, by adding an element to it) they remain mutated on consecutive calls.

They stay mutated because they are the same object each time.

Equivalent code:

Since the list is bound to the function when the function object is compiled and instantiated, this:

def foo(mutable_default_argument=[]): # make a list the default argument
    """function that uses a list"""

is almost exactly equivalent to this:

_a_list = [] # create a list in the globals

def foo(mutable_default_argument=_a_list): # make it the default argument
    """function that uses a list"""

del _a_list # remove globals name binding

Demonstration

Here's a demonstration - you can verify that they are the same object each time they are referenced by

  • seeing that the list is created before the function has finished compiling to a function object,
  • observing that the id is the same each time the list is referenced,
  • observing that the list stays changed when the function that uses it is called a second time,
  • observing the order in which the output is printed from the source (which I conveniently numbered for you):

example.py

print('1. Global scope being evaluated')

def create_list():
    '''noisily create a list for usage as a kwarg'''
    l = []
    print('3. list being created and returned, id: ' + str(id(l)))
    return l

print('2. example_function about to be compiled to an object')

def example_function(default_kwarg1=create_list()):
    print('appending "a" in default default_kwarg1')
    default_kwarg1.append("a")
    print('list with id: ' + str(id(default_kwarg1)) + 
          ' - is now: ' + repr(default_kwarg1))

print('4. example_function compiled: ' + repr(example_function))


if __name__ == '__main__':
    print('5. calling example_function twice!:')
    example_function()
    example_function()

and running it with python example.py:

1. Global scope being evaluated
2. example_function about to be compiled to an object
3. list being created and returned, id: 140502758808032
4. example_function compiled: <function example_function at 0x7fc9590905f0>
5. calling example_function twice!:
appending "a" in default default_kwarg1
list with id: 140502758808032 - is now: ['a']
appending "a" in default default_kwarg1
list with id: 140502758808032 - is now: ['a', 'a']

Does this violate the principle of "Least Astonishment"?

This order of execution is frequently confusing to new users of Python. If you understand the Python execution model, then it becomes quite expected.

The usual instruction to new Python users:

But this is why the usual instruction to new users is to create their default arguments like this instead:

def example_function_2(default_kwarg=None):
    if default_kwarg is None:
        default_kwarg = []

This uses the None singleton as a sentinel object to tell the function whether or not we've gotten an argument other than the default. If we get no argument, then we actually want to use a new empty list, [], as the default.

As the tutorial section on control flow says:

If you don’t want the default to be shared between subsequent calls, you can write the function like this instead:

def f(a, L=None):
    if L is None:
        L = []
    L.append(a)
    return L
25
votes

The shortest answer would probably be "definition is execution", therefore the whole argument makes no strict sense. As a more contrived example, you may cite this:

def a(): return []

def b(x=a()):
    print x

Hopefully it's enough to show that not executing the default argument expressions at the execution time of the def statement isn't easy or doesn't make sense, or both.

I agree it's a gotcha when you try to use default constructors, though.

22
votes

This behavior is not surprising if you take the following into consideration:

  1. The behavior of read-only class attributes upon assignment attempts, and that
  2. Functions are objects (explained well in the accepted answer).

The role of (2) has been covered extensively in this thread. (1) is likely the astonishment causing factor, as this behavior is not "intuitive" when coming from other languages.

(1) is described in the Python tutorial on classes. In an attempt to assign a value to a read-only class attribute:

...all variables found outside of the innermost scope are read-only (an attempt to write to such a variable will simply create a new local variable in the innermost scope, leaving the identically named outer variable unchanged).

Look back to the original example and consider the above points:

def foo(a=[]):
    a.append(5)
    return a

Here foo is an object and a is an attribute of foo (available at foo.func_defs[0]). Since a is a list, a is mutable and is thus a read-write attribute of foo. It is initialized to the empty list as specified by the signature when the function is instantiated, and is available for reading and writing as long as the function object exists.

Calling foo without overriding a default uses that default's value from foo.func_defs. In this case, foo.func_defs[0] is used for a within function object's code scope. Changes to a change foo.func_defs[0], which is part of the foo object and persists between execution of the code in foo.

Now, compare this to the example from the documentation on emulating the default argument behavior of other languages, such that the function signature defaults are used every time the function is executed:

def foo(a, L=None):
    if L is None:
        L = []
    L.append(a)
    return L

Taking (1) and (2) into account, one can see why this accomplishes the desired behavior:

  • When the foo function object is instantiated, foo.func_defs[0] is set to None, an immutable object.
  • When the function is executed with defaults (with no parameter specified for L in the function call), foo.func_defs[0] (None) is available in the local scope as L.
  • Upon L = [], the assignment cannot succeed at foo.func_defs[0], because that attribute is read-only.
  • Per (1), a new local variable also named L is created in the local scope and used for the remainder of the function call. foo.func_defs[0] thus remains unchanged for future invocations of foo.
21
votes

A simple workaround using None

>>> def bar(b, data=None):
...     data = data or []
...     data.append(b)
...     return data
... 
>>> bar(3)
[3]
>>> bar(3)
[3]
>>> bar(3)
[3]
>>> bar(3, [34])
[34, 3]
>>> bar(3, [34])
[34, 3]
19
votes

I am going to demonstrate an alternative structure to pass a default list value to a function (it works equally well with dictionaries).

As others have extensively commented, the list parameter is bound to the function when it is defined as opposed to when it is executed. Because lists and dictionaries are mutable, any alteration to this parameter will affect other calls to this function. As a result, subsequent calls to the function will receive this shared list which may have been altered by any other calls to the function. Worse yet, two parameters are using this function's shared parameter at the same time oblivious to the changes made by the other.

Wrong Method (probably...):

def foo(list_arg=[5]):
    return list_arg

a = foo()
a.append(6)
>>> a
[5, 6]

b = foo()
b.append(7)
# The value of 6 appended to variable 'a' is now part of the list held by 'b'.
>>> b
[5, 6, 7]  

# Although 'a' is expecting to receive 6 (the last element it appended to the list),
# it actually receives the last element appended to the shared list.
# It thus receives the value 7 previously appended by 'b'.
>>> a.pop()             
7

You can verify that they are one and the same object by using id:

>>> id(a)
5347866528

>>> id(b)
5347866528

Per Brett Slatkin's "Effective Python: 59 Specific Ways to Write Better Python", Item 20: Use None and Docstrings to specify dynamic default arguments (p. 48)

The convention for achieving the desired result in Python is to provide a default value of None and to document the actual behaviour in the docstring.

This implementation ensures that each call to the function either receives the default list or else the list passed to the function.

Preferred Method:

def foo(list_arg=None):
   """
   :param list_arg:  A list of input values. 
                     If none provided, used a list with a default value of 5.
   """
   if not list_arg:
       list_arg = [5]
   return list_arg

a = foo()
a.append(6)
>>> a
[5, 6]

b = foo()
b.append(7)
>>> b
[5, 7]

c = foo([10])
c.append(11)
>>> c
[10, 11]

There may be legitimate use cases for the 'Wrong Method' whereby the programmer intended the default list parameter to be shared, but this is more likely the exception than the rule.

17
votes

The solutions here are:

  1. Use None as your default value (or a nonce object), and switch on that to create your values at runtime; or
  2. Use a lambda as your default parameter, and call it within a try block to get the default value (this is the sort of thing that lambda abstraction is for).

The second option is nice because users of the function can pass in a callable, which may be already existing (such as a type)

16
votes

You can get round this by replacing the object (and therefore the tie with the scope):

def foo(a=[]):
    a = list(a)
    a.append(5)
    return a

Ugly, but it works.

16
votes

When we do this:

def foo(a=[]):
    ...

... we assign the argument a to an unnamed list, if the caller does not pass the value of a.

To make things simpler for this discussion, let's temporarily give the unnamed list a name. How about pavlo ?

def foo(a=pavlo):
   ...

At any time, if the caller doesn't tell us what a is, we reuse pavlo.

If pavlo is mutable (modifiable), and foo ends up modifying it, an effect we notice the next time foo is called without specifying a.

So this is what you see (Remember, pavlo is initialized to []):

 >>> foo()
 [5]

Now, pavlo is [5].

Calling foo() again modifies pavlo again:

>>> foo()
[5, 5]

Specifying a when calling foo() ensures pavlo is not touched.

>>> ivan = [1, 2, 3, 4]
>>> foo(a=ivan)
[1, 2, 3, 4, 5]
>>> ivan
[1, 2, 3, 4, 5]

So, pavlo is still [5, 5].

>>> foo()
[5, 5, 5]
16
votes

I sometimes exploit this behavior as an alternative to the following pattern:

singleton = None

def use_singleton():
    global singleton

    if singleton is None:
        singleton = _make_singleton()

    return singleton.use_me()

If singleton is only used by use_singleton, I like the following pattern as a replacement:

# _make_singleton() is called only once when the def is executed
def use_singleton(singleton=_make_singleton()):
    return singleton.use_me()

I've used this for instantiating client classes that access external resources, and also for creating dicts or lists for memoization.

Since I don't think this pattern is well known, I do put a short comment in to guard against future misunderstandings.

15
votes

It may be true that:

  1. Someone is using every language/library feature, and
  2. Switching the behavior here would be ill-advised, but

it is entirely consistent to hold to both of the features above and still make another point:

  1. It is a confusing feature and it is unfortunate in Python.

The other answers, or at least some of them either make points 1 and 2 but not 3, or make point 3 and downplay points 1 and 2. But all three are true.

It may be true that switching horses in midstream here would be asking for significant breakage, and that there could be more problems created by changing Python to intuitively handle Stefano's opening snippet. And it may be true that someone who knew Python internals well could explain a minefield of consequences. However,

The existing behavior is not Pythonic, and Python is successful because very little about the language violates the principle of least astonishment anywhere near this badly. It is a real problem, whether or not it would be wise to uproot it. It is a design flaw. If you understand the language much better by trying to trace out the behavior, I can say that C++ does all of this and more; you learn a lot by navigating, for instance, subtle pointer errors. But this is not Pythonic: people who care about Python enough to persevere in the face of this behavior are people who are drawn to the language because Python has far fewer surprises than other language. Dabblers and the curious become Pythonistas when they are astonished at how little time it takes to get something working--not because of a design fl--I mean, hidden logic puzzle--that cuts against the intuitions of programmers who are drawn to Python because it Just Works.

9
votes

This "bug" gave me a lot of overtime work hours! But I'm beginning to see a potential use of it (but I would have liked it to be at the execution time, still)

I'm gonna give you what I see as a useful example.

def example(errors=[]):
    # statements
    # Something went wrong
    mistake = True
    if mistake:
        tryToFixIt(errors)
        # Didn't work.. let's try again
        tryToFixItAnotherway(errors)
        # This time it worked
    return errors

def tryToFixIt(err):
    err.append('Attempt to fix it')

def tryToFixItAnotherway(err):
    err.append('Attempt to fix it by another way')

def main():
    for item in range(2):
        errors = example()
    print '\n'.join(errors)

main()

prints the following

Attempt to fix it
Attempt to fix it by another way
Attempt to fix it
Attempt to fix it by another way
9
votes

This is not a design flaw. Anyone who trips over this is doing something wrong.

There are 3 cases I see where you might run into this problem:

  1. You intend to modify the argument as a side effect of the function. In this case it never makes sense to have a default argument. The only exception is when you're abusing the argument list to have function attributes, e.g. cache={}, and you wouldn't be expected to call the function with an actual argument at all.
  2. You intend to leave the argument unmodified, but you accidentally did modify it. That's a bug, fix it.
  3. You intend to modify the argument for use inside the function, but didn't expect the modification to be viewable outside of the function. In that case you need to make a copy of the argument, whether it was the default or not! Python is not a call-by-value language so it doesn't make the copy for you, you need to be explicit about it.

The example in the question could fall into category 1 or 3. It's odd that it both modifies the passed list and returns it; you should pick one or the other.

8
votes

Just change the function to be:

def notastonishinganymore(a = []): 
    '''The name is just a joke :)'''
    a = a[:]
    a.append(5)
    return a
8
votes

Every other answer explains why this is actually a nice and desired behavior, or why you shouldn't be needing this anyway. Mine is for those stubborn ones who want to exercise their right to bend the language to their will, not the other way around.

We will "fix" this behavior with a decorator that will copy the default value instead of reusing the same instance for each positional argument left at its default value.

import inspect
from copy import copy

def sanify(function):
    def wrapper(*a, **kw):
        # store the default values
        defaults = inspect.getargspec(function).defaults # for python2
        # construct a new argument list
        new_args = []
        for i, arg in enumerate(defaults):
            # allow passing positional arguments
            if i in range(len(a)):
                new_args.append(a[i])
            else:
                # copy the value
                new_args.append(copy(arg))
        return function(*new_args, **kw)
    return wrapper

Now let's redefine our function using this decorator:

@sanify
def foo(a=[]):
    a.append(5)
    return a

foo() # '[5]'
foo() # '[5]' -- as desired

This is particularly neat for functions that take multiple arguments. Compare:

# the 'correct' approach
def bar(a=None, b=None, c=None):
    if a is None:
        a = []
    if b is None:
        b = []
    if c is None:
        c = []
    # finally do the actual work

with

# the nasty decorator hack
@sanify
def bar(a=[], b=[], c=[]):
    # wow, works right out of the box!

It's important to note that the above solution breaks if you try to use keyword args, like so:

foo(a=[4])

The decorator could be adjusted to allow for that, but we leave this as an exercise for the reader ;)

7
votes

TLDR: Define-time defaults are consistent and strictly more expressive.


Defining a function affects two scopes: the defining scope containing the function, and the execution scope contained by the function. While it is pretty clear how blocks map to scopes, the question is where def <name>(<args=defaults>): belongs to:

...                           # defining scope
def name(parameter=default):  # ???
    ...                       # execution scope

The def name part must evaluate in the defining scope - we want name to be available there, after all. Evaluating the function only inside itself would make it inaccessible.

Since parameter is a constant name, we can "evaluate" it at the same time as def name. This also has the advantage it produces the function with a known signature as name(parameter=...):, instead of a bare name(...):.

Now, when to evaluate default?

Consistency already says "at definition": everything else of def <name>(<args=defaults>): is best evaluated at definition as well. Delaying parts of it would be the astonishing choice.

The two choices are not equivalent, either: If default is evaluated at definition time, it can still affect execution time. If default is evaluated at execution time, it cannot affect definition time. Choosing "at definition" allows expressing both cases, while choosing "at execution" can express only one:

def name(parameter=defined):  # set default at definition time
    ...

def name(parameter=default):     # delay default until execution time
    parameter = default if parameter is None else parameter
    ...
6
votes

I think the answer to this question lies in how python pass data to parameter (pass by value or by reference), not mutability or how python handle the "def" statement.

A brief introduction. First, there are two type of data types in python, one is simple elementary data type, like numbers, and another data type is objects. Second, when passing data to parameters, python pass elementary data type by value, i.e., make a local copy of the value to a local variable, but pass object by reference, i.e., pointers to the object.

Admitting the above two points, let's explain what happened to the python code. It's only because of passing by reference for objects, but has nothing to do with mutable/immutable, or arguably the fact that "def" statement is executed only once when it is defined.

[] is an object, so python pass the reference of [] to a, i.e., a is only a pointer to [] which lies in memory as an object. There is only one copy of [] with, however, many references to it. For the first foo(), the list [] is changed to 1 by append method. But Note that there is only one copy of the list object and this object now becomes 1. When running the second foo(), what effbot webpage says (items is not evaluated any more) is wrong. a is evaluated to be the list object, although now the content of the object is 1. This is the effect of passing by reference! The result of foo(3) can be easily derived in the same way.

To further validate my answer, let's take a look at two additional codes.

====== No. 2 ========

def foo(x, items=None):
    if items is None:
        items = []
    items.append(x)
    return items

foo(1)  #return [1]
foo(2)  #return [2]
foo(3)  #return [3]

[] is an object, so is None (the former is mutable while the latter is immutable. But the mutability has nothing to do with the question). None is somewhere in the space but we know it's there and there is only one copy of None there. So every time foo is invoked, items is evaluated (as opposed to some answer that it is only evaluated once) to be None, to be clear, the reference (or the address) of None. Then in the foo, item is changed to [], i.e., points to another object which has a different address.

====== No. 3 =======

def foo(x, items=[]):
    items.append(x)
    return items

foo(1)    # returns [1]
foo(2,[]) # returns [2]
foo(3)    # returns [1,3]

The invocation of foo(1) make items point to a list object [] with an address, say, 11111111. the content of the list is changed to 1 in the foo function in the sequel, but the address is not changed, still 11111111. Then foo(2,[]) is coming. Although the [] in foo(2,[]) has the same content as the default parameter [] when calling foo(1), their address are different! Since we provide the parameter explicitly, items has to take the address of this new [], say 2222222, and return it after making some change. Now foo(3) is executed. since only x is provided, items has to take its default value again. What's the default value? It is set when defining the foo function: the list object located in 11111111. So the items is evaluated to be the address 11111111 having an element 1. The list located at 2222222 also contains one element 2, but it is not pointed by items any more. Consequently, An append of 3 will make items [1,3].

From the above explanations, we can see that the effbot webpage recommended in the accepted answer failed to give a relevant answer to this question. What is more, I think a point in the effbot webpage is wrong. I think the code regarding the UI.Button is correct:

for i in range(10):
    def callback():
        print "clicked button", i
    UI.Button("button %s" % i, callback)

Each button can hold a distinct callback function which will display different value of i. I can provide an example to show this:

x=[]
for i in range(10):
    def callback():
        print(i)
    x.append(callback) 

If we execute x[7]() we'll get 7 as expected, and x[9]() will gives 9, another value of i.